/* SPDX-License-Identifier: GPL-2.0-or-later */
/*

    bttv - Bt848 frame grabber driver

    bttv's *private* header file  --  nobody other than bttv itself
    should ever include this file.

    (c) 2000-2002 Gerd Knorr <kraxel@bytesex.org>

*/

#ifndef _BTTVP_H_
#define _BTTVP_H_

#include <linux/types.h>
#include <linux/wait.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/pci.h>
#include <linux/input.h>
#include <linux/mutex.h>
#include <linux/scatterlist.h>
#include <linux/device.h>
#include <asm/io.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-fh.h>
#include <media/videobuf2-dma-sg.h>
#include <media/tveeprom.h>
#include <media/rc-core.h>
#include <media/i2c/ir-kbd-i2c.h>
#include <media/drv-intf/tea575x.h>

#include "bt848.h"
#include "bttv.h"
#include "btcx-risc.h"

#ifdef __KERNEL__

#define FORMAT_FLAGS_DITHER       0x01
#define FORMAT_FLAGS_PACKED       0x02
#define FORMAT_FLAGS_PLANAR       0x04
#define FORMAT_FLAGS_RAW          0x08
#define FORMAT_FLAGS_CrCb         0x10

#define RISC_SLOT_O_VBI        4
#define RISC_SLOT_O_FIELD      6
#define RISC_SLOT_E_VBI       10
#define RISC_SLOT_E_FIELD     12
#define RISC_SLOT_LOOP        14

#define RESOURCE_VIDEO_STREAM  2
#define RESOURCE_VBI           4
#define RESOURCE_VIDEO_READ    8

#define RAW_LINES            640
#define RAW_BPL             1024

#define UNSET (-1U)

/* Min. value in VDELAY register. */
#define MIN_VDELAY 2
/* Even to get Cb first, odd for Cr. */
#define MAX_HDELAY (0x3FF & -2)
/* Limits scaled width, which must be a multiple of 4. */
#define MAX_HACTIVE (0x3FF & -4)

#define BTTV_NORMS    (\
		V4L2_STD_PAL    | V4L2_STD_PAL_N | \
		V4L2_STD_PAL_Nc | V4L2_STD_SECAM | \
		V4L2_STD_NTSC   | V4L2_STD_PAL_M | \
		V4L2_STD_PAL_60)
/* ---------------------------------------------------------- */

struct bttv_tvnorm {
	int   v4l2_id;
	char  *name;
	u32   Fsc;
	u16   swidth, sheight; /* scaled standard width, height */
	u16   totalwidth;
	u8    adelay, bdelay, iform;
	u32   scaledtwidth;
	u16   hdelayx1, hactivex1;
	u16   vdelay;
	u8    vbipack;
	u16   vtotal;
	int   sram;
	/* ITU-R frame line number of the first VBI line we can
	   capture, of the first and second field. The last possible line
	   is determined by cropcap.bounds. */
	u16   vbistart[2];
	/* Horizontally this counts fCLKx1 samples following the leading
	   edge of the horizontal sync pulse, vertically ITU-R frame line
	   numbers of the first field times two (2, 4, 6, ... 524 or 624). */
	struct v4l2_cropcap cropcap;
};
extern const struct bttv_tvnorm bttv_tvnorms[];

struct bttv_format {
	int  fourcc;          /* video4linux 2      */
	int  btformat;        /* BT848_COLOR_FMT_*  */
	int  btswap;          /* BT848_COLOR_CTL_*  */
	int  depth;           /* bit/pixel          */
	int  flags;
	int  hshift,vshift;   /* for planar modes   */
};

struct bttv_ir {
	struct rc_dev           *dev;
	struct bttv		*btv;
	struct timer_list       timer;

	char                    name[32];
	char                    phys[32];

	/* Usual gpio signalling */
	u32                     mask_keycode;
	u32                     mask_keydown;
	u32                     mask_keyup;
	u32                     polling;
	u32                     last_gpio;
	int                     shift_by;
	int                     rc5_remote_gap;

	/* RC5 gpio */
	bool			rc5_gpio;   /* Is RC5 legacy GPIO enabled? */
	u32                     last_bit;   /* last raw bit seen */
	u32                     code;       /* raw code under construction */
	ktime_t						base_time;  /* time of last seen code */
	bool                    active;     /* building raw code */
};


/* ---------------------------------------------------------- */

struct bttv_geometry {
	u8  vtc,crop,comb;
	u16 width,hscale,hdelay;
	u16 sheight,vscale,vdelay,vtotal;
};

struct bttv_buffer {
	/* common v4l buffer stuff -- must be first */
	struct vb2_v4l2_buffer vbuf;
	struct list_head list;

	/* bttv specific */
	int                        btformat;
	int                        btswap;
	struct bttv_geometry       geo;
	struct btcx_riscmem        top;
	struct btcx_riscmem        bottom;
};

struct bttv_buffer_set {
	struct bttv_buffer     *top;       /* top field buffer    */
	struct bttv_buffer     *bottom;    /* bottom field buffer */
	unsigned int           top_irq;
	unsigned int           frame_irq;
};

struct bttv_vbi_fmt {
	struct v4l2_vbi_format fmt;

	/* fmt.start[] and count[] refer to this video standard. */
	const struct bttv_tvnorm *tvnorm;

	/* Earliest possible start of video capturing with this
	   v4l2_vbi_format, in struct bttv_crop.rect units. */
	__s32                  end;
};

/* bttv-vbi.c */
extern const struct vb2_ops bttv_vbi_qops;

void bttv_vbi_fmt_reset(struct bttv_vbi_fmt *f, unsigned int norm);

struct bttv_crop {
	/* A cropping rectangle in struct bttv_tvnorm.cropcap units. */
	struct v4l2_rect       rect;

	/* Scaled image size limits with this crop rect. Divide
	   max_height, but not min_height, by two when capturing
	   single fields. See also bttv_crop_reset() and
	   bttv_crop_adjust() in bttv-driver.c. */
	__s32                  min_scaled_width;
	__s32                  min_scaled_height;
	__s32                  max_scaled_width;
	__s32                  max_scaled_height;
};

/* ---------------------------------------------------------- */
/* bttv-risc.c                                                */

/* risc code generators - capture */
int bttv_risc_packed(struct bttv *btv, struct btcx_riscmem *risc,
		     struct scatterlist *sglist,
		     unsigned int offset, unsigned int bpl,
		     unsigned int pitch, unsigned int skip_lines,
		     unsigned int store_lines);

/* control dma register + risc main loop */
void bttv_set_dma(struct bttv *btv, int override);
int bttv_risc_init_main(struct bttv *btv);
int bttv_risc_hook(struct bttv *btv, int slot, struct btcx_riscmem *risc,
		   int irqflags);

/* capture buffer handling */
int bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf);
int bttv_buffer_activate_video(struct bttv *btv,
			       struct bttv_buffer_set *set);
int bttv_buffer_risc_vbi(struct bttv *btv, struct bttv_buffer *buf);
int bttv_buffer_activate_vbi(struct bttv *btv,
			     struct bttv_buffer *vbi);

/* ---------------------------------------------------------- */
/* bttv-vbi.c                                                 */

/*
 * 2048 for compatibility with earlier driver versions. The driver really
 * stores 1024 + tvnorm->vbipack * 4 samples per line in the buffer. Note
 * tvnorm->vbipack is <= 0xFF (limit of VBIPACK_LO + HI is 0x1FF DWORDs) and
 * VBI read()s store a frame counter in the last four bytes of the VBI image.
 */
#define VBI_BPL 2048

#define VBI_DEFLINES 16

int bttv_try_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f);
int bttv_g_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f);
int bttv_s_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f);

/* ---------------------------------------------------------- */
/* bttv-gpio.c */

extern struct bus_type bttv_sub_bus_type;
int bttv_sub_add_device(struct bttv_core *core, char *name);
int bttv_sub_del_devices(struct bttv_core *core);

/* ---------------------------------------------------------- */
/* bttv-input.c                                               */

extern void init_bttv_i2c_ir(struct bttv *btv);

/* ---------------------------------------------------------- */
/* bttv-i2c.c                                                 */
extern int init_bttv_i2c(struct bttv *btv);
extern int fini_bttv_i2c(struct bttv *btv);

/* ---------------------------------------------------------- */
/* bttv-driver.c                                              */

/* insmod options */
extern unsigned int bttv_verbose;
extern unsigned int bttv_debug;
extern unsigned int bttv_gpio;
int check_alloc_btres_lock(struct bttv *btv, int bit);
void free_btres_lock(struct bttv *btv, int bits);
extern void bttv_gpio_tracking(struct bttv *btv, char *comment);

#define dprintk(fmt, ...)			\
do {						\
	if (bttv_debug >= 1)			\
		pr_debug(fmt, ##__VA_ARGS__);	\
} while (0)
#define dprintk_cont(fmt, ...)			\
do {						\
	if (bttv_debug >= 1)			\
		pr_cont(fmt, ##__VA_ARGS__);	\
} while (0)
#define d2printk(fmt, ...)			\
do {						\
	if (bttv_debug >= 2)			\
		printk(fmt, ##__VA_ARGS__);	\
} while (0)

#define BTTV_MAX_FBUF   0x208000
#define BTTV_TIMEOUT    msecs_to_jiffies(500)    /* 0.5 seconds */
#define BTTV_FREE_IDLE  msecs_to_jiffies(1000)   /* one second */


struct bttv_pll_info {
	unsigned int pll_ifreq;    /* PLL input frequency        */
	unsigned int pll_ofreq;    /* PLL output frequency       */
	unsigned int pll_crystal;  /* Crystal used for input     */
	unsigned int pll_current;  /* Currently programmed ofreq */
};

/* for gpio-connected remote control */
struct bttv_input {
	struct input_dev      *dev;
	char                  name[32];
	char                  phys[32];
	u32                   mask_keycode;
	u32                   mask_keydown;
};

struct bttv_suspend_state {
	u32  gpio_enable;
	u32  gpio_data;
	int  disabled;
	int  loop_irq;
	struct bttv_buffer_set video;
	struct bttv_buffer     *vbi;
};

struct bttv_tea575x_gpio {
	u8 data, clk, wren, most;
};

struct bttv {
	struct bttv_core c;

	/* pci device config */
	unsigned short id;
	unsigned char revision;
	unsigned char __iomem *bt848_mmio;   /* pointer to mmio */

	/* card configuration info */
	unsigned int cardid;   /* pci subsystem id (bt878 based ones) */
	unsigned int tuner_type;  /* tuner chip type */
	unsigned int tda9887_conf;
	unsigned int svhs, dig;
	unsigned int has_saa6588:1;
	struct bttv_pll_info pll;
	int triton1;
	int gpioirq;

	int use_i2c_hw;

	/* old gpio interface */
	int shutdown;

	void (*volume_gpio)(struct bttv *btv, __u16 volume);
	void (*audio_mode_gpio)(struct bttv *btv, struct v4l2_tuner *tuner, int set);

	/* new gpio interface */
	spinlock_t gpio_lock;

	/* i2c layer */
	struct i2c_algo_bit_data   i2c_algo;
	struct i2c_client          i2c_client;
	int                        i2c_state, i2c_rc;
	int                        i2c_done;
	wait_queue_head_t          i2c_queue;
	struct v4l2_subdev	  *sd_msp34xx;
	struct v4l2_subdev	  *sd_tvaudio;
	struct v4l2_subdev	  *sd_tda7432;

	/* video4linux (1) */
	struct video_device video_dev;
	struct video_device radio_dev;
	struct video_device vbi_dev;

	/* controls */
	struct v4l2_ctrl_handler   ctrl_handler;
	struct v4l2_ctrl_handler   radio_ctrl_handler;

	/* infrared remote */
	int has_remote;
	struct bttv_ir *remote;

	/* I2C remote data */
	struct IR_i2c_init_data    init_data;

	/* locking */
	spinlock_t s_lock;
	struct mutex lock;
	int resources;

	/* video state */
	unsigned int input;
	unsigned int audio_input;
	unsigned int mute;
	unsigned long tv_freq;
	unsigned int tvnorm;
	v4l2_std_id std;
	int hue, contrast, bright, saturation;
	struct v4l2_framebuffer fbuf;
	__u32 field_count;

	/* various options */
	int opt_combfilter;
	int opt_automute;
	int opt_vcr_hack;
	int opt_uv_ratio;

	/* radio data/state */
	int has_radio;
	int has_radio_tuner;
	int radio_user;
	int radio_uses_msp_demodulator;
	unsigned long radio_freq;

	/* miro/pinnacle + Aimslab VHX
	   philips matchbox (tea5757 radio tuner) support */
	int has_tea575x;
	struct bttv_tea575x_gpio tea_gpio;
	struct snd_tea575x tea;

	/* ISA stuff (Terratec Active Radio Upgrade) */
	int mbox_ior;
	int mbox_iow;
	int mbox_csel;

	/* switch status for multi-controller cards */
	char sw_status[4];

	/* risc memory management data
	   - must acquire s_lock before changing these
	   - only the irq handler is supported to touch top + bottom + vcurr */
	struct btcx_riscmem     main;
	struct list_head        capture;    /* video capture queue */
	struct list_head        vcapture;   /* vbi capture queue   */
	struct bttv_buffer_set  curr;       /* active buffers      */
	struct bttv_buffer      *cvbi;      /* active vbi buffer   */
	int                     loop_irq;
	int                     new_input;

	unsigned long dma_on;
	struct timer_list timeout;
	struct bttv_suspend_state state;

	/* stats */
	unsigned int errors;
	unsigned int framedrop;
	unsigned int irq_total;
	unsigned int irq_me;

	unsigned int users;
	struct v4l2_fh fh;
	enum v4l2_buf_type type;

	enum v4l2_field field;
	int field_last;

	/* video capture */
	struct vb2_queue capq;
	const struct bttv_format *fmt;
	int width;
	int height;

	/* vbi capture */
	struct vb2_queue vbiq;
	struct bttv_vbi_fmt vbi_fmt;
	unsigned int vbi_count[2];

	/* Application called VIDIOC_S_SELECTION. */
	int do_crop;

	/* used to make dvb-bt8xx autoloadable */
	struct work_struct request_module_wk;

	/* Default (0) and current (1) video capturing
	   cropping parameters in bttv_tvnorm.cropcap units. Protected
	   by bttv.lock. */
	struct bttv_crop crop[2];

	/* Earliest possible start of video capturing in
	   bttv_tvnorm.cropcap line units. Set by check_alloc_btres()
	   and free_btres(). Protected by bttv.lock. */
	__s32			vbi_end;

	/* Latest possible end of VBI capturing (= crop[x].rect.top when
	   VIDEO_RESOURCES are locked). Set by check_alloc_btres()
	   and free_btres(). Protected by bttv.lock. */
	__s32			crop_start;
};

static inline struct bttv *to_bttv(struct v4l2_device *v4l2_dev)
{
	return container_of(v4l2_dev, struct bttv, c.v4l2_dev);
}

/* our devices */
#define BTTV_MAX 32
extern unsigned int bttv_num;
extern struct bttv *bttvs[BTTV_MAX];

static inline unsigned int bttv_muxsel(const struct bttv *btv,
				       unsigned int input)
{
	return (bttv_tvcards[btv->c.type].muxsel >> (input * 2)) & 3;
}

#endif

void init_irqreg(struct bttv *btv);

#define btwrite(dat,adr)    writel((dat), btv->bt848_mmio+(adr))
#define btread(adr)         readl(btv->bt848_mmio+(adr))

#define btand(dat,adr)      btwrite((dat) & btread(adr), adr)
#define btor(dat,adr)       btwrite((dat) | btread(adr), adr)
#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr)

#endif /* _BTTVP_H_ */