// SPDX-License-Identifier: GPL-2.0-only /* * VFIO platform driver specialized for Calxeda xgmac reset * reset code is inherited from calxeda xgmac native driver * * Copyright 2010-2011 Calxeda, Inc. * Copyright (c) 2015 Linaro Ltd. * www.linaro.org */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> #include "../vfio_platform_private.h" #define DRIVER_VERSION "0.1" #define DRIVER_AUTHOR "Eric Auger <eric.auger@linaro.org>" #define DRIVER_DESC "Reset support for Calxeda xgmac vfio platform device" /* XGMAC Register definitions */ #define XGMAC_CONTROL 0x00000000 /* MAC Configuration */ /* DMA Control and Status Registers */ #define XGMAC_DMA_CONTROL 0x00000f18 /* Ctrl (Operational Mode) */ #define XGMAC_DMA_INTR_ENA 0x00000f1c /* Interrupt Enable */ /* DMA Control register defines */ #define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */ #define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */ /* Common MAC defines */ #define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */ #define MAC_ENABLE_RX 0x00000004 /* Receiver Enable */ static inline void xgmac_mac_disable(void __iomem *ioaddr) { u32 value = readl(ioaddr + XGMAC_DMA_CONTROL); value &= ~(DMA_CONTROL_ST | DMA_CONTROL_SR); writel(value, ioaddr + XGMAC_DMA_CONTROL); value = readl(ioaddr + XGMAC_CONTROL); value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX); writel(value, ioaddr + XGMAC_CONTROL); } static int vfio_platform_calxedaxgmac_reset(struct vfio_platform_device *vdev) { struct vfio_platform_region *reg = &vdev->regions[0]; if (!reg->ioaddr) { reg->ioaddr = ioremap(reg->addr, reg->size); if (!reg->ioaddr) return -ENOMEM; } /* disable IRQ */ writel(0, reg->ioaddr + XGMAC_DMA_INTR_ENA); /* Disable the MAC core */ xgmac_mac_disable(reg->ioaddr); return 0; } module_vfio_reset_handler("calxeda,hb-xgmac", vfio_platform_calxedaxgmac_reset); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC