#include <linux/module.h>
#include <linux/iio/iio.h>
#include <linux/delay.h>
#include <linux/regulator/consumer.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#include "ms5611.h"
#define MS5611_INIT_OSR(_cmd, _conv_usec, _rate) \
{ .cmd = _cmd, .conv_usec = _conv_usec, .rate = _rate }
static const struct ms5611_osr ms5611_avail_pressure_osr[] = {
MS5611_INIT_OSR(0x40, 600, 256),
MS5611_INIT_OSR(0x42, 1170, 512),
MS5611_INIT_OSR(0x44, 2280, 1024),
MS5611_INIT_OSR(0x46, 4540, 2048),
MS5611_INIT_OSR(0x48, 9040, 4096)
};
static const struct ms5611_osr ms5611_avail_temp_osr[] = {
MS5611_INIT_OSR(0x50, 600, 256),
MS5611_INIT_OSR(0x52, 1170, 512),
MS5611_INIT_OSR(0x54, 2280, 1024),
MS5611_INIT_OSR(0x56, 4540, 2048),
MS5611_INIT_OSR(0x58, 9040, 4096)
};
static const char ms5611_show_osr[] = "256 512 1024 2048 4096";
static IIO_CONST_ATTR(oversampling_ratio_available, ms5611_show_osr);
static struct attribute *ms5611_attributes[] = {
&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
NULL,
};
static const struct attribute_group ms5611_attribute_group = {
.attrs = ms5611_attributes,
};
static bool ms5611_prom_is_valid(u16 *prom, size_t len)
{
int i, j;
uint16_t crc = 0, crc_orig = prom[7] & 0x000F;
prom[7] &= 0xFF00;
for (i = 0; i < len * 2; i++) {
if (i % 2 == 1)
crc ^= prom[i >> 1] & 0x00FF;
else
crc ^= prom[i >> 1] >> 8;
for (j = 0; j < 8; j++) {
if (crc & 0x8000)
crc = (crc << 1) ^ 0x3000;
else
crc <<= 1;
}
}
crc = (crc >> 12) & 0x000F;
return crc == crc_orig;
}
static int ms5611_read_prom(struct iio_dev *indio_dev)
{
int ret, i;
struct ms5611_state *st = iio_priv(indio_dev);
for (i = 0; i < MS5611_PROM_WORDS_NB; i++) {
ret = st->read_prom_word(st, i, &st->prom[i]);
if (ret < 0) {
dev_err(&indio_dev->dev,
"failed to read prom at %d\n", i);
return ret;
}
}
if (!ms5611_prom_is_valid(st->prom, MS5611_PROM_WORDS_NB)) {
dev_err(&indio_dev->dev, "PROM integrity check failed\n");
return -ENODEV;
}
return 0;
}
static int ms5611_read_temp_and_pressure(struct iio_dev *indio_dev,
s32 *temp, s32 *pressure)
{
int ret;
struct ms5611_state *st = iio_priv(indio_dev);
ret = st->read_adc_temp_and_pressure(st, temp, pressure);
if (ret < 0) {
dev_err(&indio_dev->dev,
"failed to read temperature and pressure\n");
return ret;
}
return st->compensate_temp_and_pressure(st, temp, pressure);
}
static int ms5611_temp_and_pressure_compensate(struct ms5611_state *st,
s32 *temp, s32 *pressure)
{
s32 t = *temp, p = *pressure;
s64 off, sens, dt;
dt = t - (st->prom[5] << 8);
off = ((s64)st->prom[2] << 16) + ((st->prom[4] * dt) >> 7);
sens = ((s64)st->prom[1] << 15) + ((st->prom[3] * dt) >> 8);
t = 2000 + ((st->prom[6] * dt) >> 23);
if (t < 2000) {
s64 off2, sens2, t2;
t2 = (dt * dt) >> 31;
off2 = (5 * (t - 2000) * (t - 2000)) >> 1;
sens2 = off2 >> 1;
if (t < -1500) {
s64 tmp = (t + 1500) * (t + 1500);
off2 += 7 * tmp;
sens2 += (11 * tmp) >> 1;
}
t -= t2;
off -= off2;
sens -= sens2;
}
*temp = t;
*pressure = (((p * sens) >> 21) - off) >> 15;
return 0;
}
static int ms5607_temp_and_pressure_compensate(struct ms5611_state *st,
s32 *temp, s32 *pressure)
{
s32 t = *temp, p = *pressure;
s64 off, sens, dt;
dt = t - (st->prom[5] << 8);
off = ((s64)st->prom[2] << 17) + ((st->prom[4] * dt) >> 6);
sens = ((s64)st->prom[1] << 16) + ((st->prom[3] * dt) >> 7);
t = 2000 + ((st->prom[6] * dt) >> 23);
if (t < 2000) {
s64 off2, sens2, t2, tmp;
t2 = (dt * dt) >> 31;
tmp = (t - 2000) * (t - 2000);
off2 = (61 * tmp) >> 4;
sens2 = tmp << 1;
if (t < -1500) {
tmp = (t + 1500) * (t + 1500);
off2 += 15 * tmp;
sens2 += 8 * tmp;
}
t -= t2;
off -= off2;
sens -= sens2;
}
*temp = t;
*pressure = (((p * sens) >> 21) - off) >> 15;
return 0;
}
static int ms5611_reset(struct iio_dev *indio_dev)
{
int ret;
struct ms5611_state *st = iio_priv(indio_dev);
ret = st->reset(st);
if (ret < 0) {
dev_err(&indio_dev->dev, "failed to reset device\n");
return ret;
}
usleep_range(3000, 4000);
return 0;
}
static irqreturn_t ms5611_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct ms5611_state *st = iio_priv(indio_dev);
struct {
s32 channels[2];
s64 ts __aligned(8);
} scan;
int ret;
mutex_lock(&st->lock);
ret = ms5611_read_temp_and_pressure(indio_dev, &scan.channels[1],
&scan.channels[0]);
mutex_unlock(&st->lock);
if (ret < 0)
goto err;
iio_push_to_buffers_with_timestamp(indio_dev, &scan,
iio_get_time_ns(indio_dev));
err:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static int ms5611_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
int ret;
s32 temp, pressure;
struct ms5611_state *st = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_PROCESSED:
mutex_lock(&st->lock);
ret = ms5611_read_temp_and_pressure(indio_dev,
&temp, &pressure);
mutex_unlock(&st->lock);
if (ret < 0)
return ret;
switch (chan->type) {
case IIO_TEMP:
*val = temp * 10;
return IIO_VAL_INT;
case IIO_PRESSURE:
*val = pressure / 1000;
*val2 = (pressure % 1000) * 1000;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_TEMP:
*val = 10;
return IIO_VAL_INT;
case IIO_PRESSURE:
*val = 0;
*val2 = 1000;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
if (chan->type != IIO_TEMP && chan->type != IIO_PRESSURE)
break;
mutex_lock(&st->lock);
if (chan->type == IIO_TEMP)
*val = (int)st->temp_osr->rate;
else
*val = (int)st->pressure_osr->rate;
mutex_unlock(&st->lock);
return IIO_VAL_INT;
}
return -EINVAL;
}
static const struct ms5611_osr *ms5611_find_osr(int rate,
const struct ms5611_osr *osr,
size_t count)
{
unsigned int r;
for (r = 0; r < count; r++)
if ((unsigned short)rate == osr[r].rate)
break;
if (r >= count)
return NULL;
return &osr[r];
}
static int ms5611_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct ms5611_state *st = iio_priv(indio_dev);
const struct ms5611_osr *osr = NULL;
int ret;
if (mask != IIO_CHAN_INFO_OVERSAMPLING_RATIO)
return -EINVAL;
if (chan->type == IIO_TEMP)
osr = ms5611_find_osr(val, ms5611_avail_temp_osr,
ARRAY_SIZE(ms5611_avail_temp_osr));
else if (chan->type == IIO_PRESSURE)
osr = ms5611_find_osr(val, ms5611_avail_pressure_osr,
ARRAY_SIZE(ms5611_avail_pressure_osr));
if (!osr)
return -EINVAL;
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
mutex_lock(&st->lock);
if (chan->type == IIO_TEMP)
st->temp_osr = osr;
else
st->pressure_osr = osr;
mutex_unlock(&st->lock);
iio_device_release_direct_mode(indio_dev);
return 0;
}
static const unsigned long ms5611_scan_masks[] = {0x3, 0};
static const struct iio_chan_spec ms5611_channels[] = {
{
.type = IIO_PRESSURE,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
.scan_index = 0,
.scan_type = {
.sign = 's',
.realbits = 32,
.storagebits = 32,
.endianness = IIO_CPU,
},
},
{
.type = IIO_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
.scan_index = 1,
.scan_type = {
.sign = 's',
.realbits = 32,
.storagebits = 32,
.endianness = IIO_CPU,
},
},
IIO_CHAN_SOFT_TIMESTAMP(2),
};
static const struct iio_info ms5611_info = {
.read_raw = &ms5611_read_raw,
.write_raw = &ms5611_write_raw,
.attrs = &ms5611_attribute_group,
};
static int ms5611_init(struct iio_dev *indio_dev)
{
int ret;
ret = devm_regulator_get_enable(indio_dev->dev.parent, "vdd");
if (ret)
return ret;
ret = ms5611_reset(indio_dev);
if (ret < 0)
return ret;
ret = ms5611_read_prom(indio_dev);
if (ret < 0)
return ret;
return 0;
}
int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
const char *name, int type)
{
int ret;
struct ms5611_state *st = iio_priv(indio_dev);
mutex_init(&st->lock);
switch (type) {
case MS5611:
st->compensate_temp_and_pressure =
ms5611_temp_and_pressure_compensate;
break;
case MS5607:
st->compensate_temp_and_pressure =
ms5607_temp_and_pressure_compensate;
break;
default:
return -EINVAL;
}
st->temp_osr =
&ms5611_avail_temp_osr[ARRAY_SIZE(ms5611_avail_temp_osr) - 1];
st->pressure_osr =
&ms5611_avail_pressure_osr[ARRAY_SIZE(ms5611_avail_pressure_osr)
- 1];
indio_dev->name = name;
indio_dev->info = &ms5611_info;
indio_dev->channels = ms5611_channels;
indio_dev->num_channels = ARRAY_SIZE(ms5611_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->available_scan_masks = ms5611_scan_masks;
ret = ms5611_init(indio_dev);
if (ret < 0)
return ret;
ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
ms5611_trigger_handler, NULL);
if (ret < 0) {
dev_err(dev, "iio triggered buffer setup failed\n");
return ret;
}
ret = devm_iio_device_register(dev, indio_dev);
if (ret < 0) {
dev_err(dev, "unable to register iio device\n");
return ret;
}
return 0;
}
EXPORT_SYMBOL_NS(ms5611_probe, IIO_MS5611);
MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>");
MODULE_DESCRIPTION("MS5611 core driver");
MODULE_LICENSE("GPL v2"