Directory Files
.. 2
accel 141
adc 260
addac 8
afe 4
amplifiers 8
buffer 14
cdc 6
chemical 43
common 2
dac 98
dummy 10
filter 4
frequency 18
gyro 47
health 11
humidity 26
imu 23
light 119
magnetometer 45
multiplexer 4
orientation 6
position 6
potentiometer 26
potentiostat 4
pressure 63
proximity 37
resolver 6
temperature 30
test 6
trigger 14
File Size
Kconfig 3.1 kB
Makefile 1.1 kB
TODO 454 B
iio_core.h 3.4 kB
iio_core_trigger.h 1.7 kB
industrialio-buffer.c 52 kB
industrialio-configfs.c 1.1 kB
industrialio-configfs.mod.c 0 B
industrialio-core.c 56 kB
industrialio-event.c 16 kB
industrialio-gts-helper.c 30 kB
industrialio-gts-helper.mod.c 0 B
industrialio-sw-device.c 4.2 kB
industrialio-sw-device.mod.c 0 B
industrialio-sw-trigger.c 4.3 kB
industrialio-sw-trigger.mod.c 0 B
industrialio-trigger.c 21 kB
industrialio-triggered-event.c 2.1 kB
industrialio-triggered-event.mod.c 0 B
industrialio.mod.c 0 B
inkern.c 26 kB

Linux v6.6.1 - iio

# SPDX-License-Identifier: GPL-2.0-only
#
# Industrial I/O subsystem configuration
#

menuconfig IIO
	tristate "Industrial I/O support"
	help
	  The industrial I/O subsystem provides a unified framework for
	  drivers for many different types of embedded sensors using a
	  number of different physical interfaces (i2c, spi, etc).

if IIO

config IIO_BUFFER
	bool "Enable buffer support within IIO"
	help
	  Provide core support for various buffer based data
	  acquisition methods.

if IIO_BUFFER
	source "drivers/iio/buffer/Kconfig"
endif # IIO_BUFFER

config IIO_CONFIGFS
	tristate "Enable IIO configuration via configfs"
	select CONFIGFS_FS
	help
	  This allows configuring various IIO bits through configfs
	  (e.g. software triggers). For more info see
	  Documentation/iio/iio_configfs.rst.

config IIO_GTS_HELPER
	tristate

config IIO_TRIGGER
	bool "Enable triggered sampling support"
	help
	  Provides IIO core support for triggers.  Currently these
	  are used to initialize capture of samples to push into
	  buffers.  The triggers are effectively a 'capture
	  data now' interrupt.

config IIO_CONSUMERS_PER_TRIGGER
	int "Maximum number of consumers per trigger"
	depends on IIO_TRIGGER
	default "2"
	help
	  This value controls the maximum number of consumers that a
	  given trigger may handle. Default is 2.

config IIO_SW_DEVICE
	tristate "Enable software IIO device support"
	select IIO_CONFIGFS
	help
	  Provides IIO core support for software devices. A software
	  device can be created via configfs or directly by a driver
	  using the API provided.

config IIO_SW_TRIGGER
	tristate "Enable software triggers support"
	select IIO_CONFIGFS
	help
	  Provides IIO core support for software triggers. A software
	  trigger can be created via configfs or directly by a driver
	  using the API provided.

config IIO_TRIGGERED_EVENT
	tristate "Enable triggered events support"
	select IIO_TRIGGER
	help
	  Provides helper functions for setting up triggered events.

source "drivers/iio/accel/Kconfig"
source "drivers/iio/adc/Kconfig"
source "drivers/iio/addac/Kconfig"
source "drivers/iio/afe/Kconfig"
source "drivers/iio/amplifiers/Kconfig"
source "drivers/iio/cdc/Kconfig"
source "drivers/iio/chemical/Kconfig"
source "drivers/iio/common/Kconfig"
source "drivers/iio/dac/Kconfig"
source "drivers/iio/dummy/Kconfig"
source "drivers/iio/filter/Kconfig"
source "drivers/iio/frequency/Kconfig"
source "drivers/iio/gyro/Kconfig"
source "drivers/iio/health/Kconfig"
source "drivers/iio/humidity/Kconfig"
source "drivers/iio/imu/Kconfig"
source "drivers/iio/light/Kconfig"
source "drivers/iio/magnetometer/Kconfig"
source "drivers/iio/multiplexer/Kconfig"
source "drivers/iio/orientation/Kconfig"
source "drivers/iio/test/Kconfig"
if IIO_TRIGGER
   source "drivers/iio/trigger/Kconfig"
endif #IIO_TRIGGER
source "drivers/iio/position/Kconfig"
source "drivers/iio/potentiometer/Kconfig"
source "drivers/iio/potentiostat/Kconfig"
source "drivers/iio/pressure/Kconfig"
source "drivers/iio/proximity/Kconfig"
source "drivers/iio/resolver/Kconfig"
source "drivers/iio/temperature/Kconfig"

endif # IIO