#include <linux/platform_device.h>
#include "pinctrl-starfive-jhb100.h"
#define PADNUM_PER2POK_GPIO_D36 5
#define PADNUM_PER2POK_GPIO_D40 9
#define PADNUM_PER2POK_GPIO_D48 17
static const struct jhb100_pin_layout_desc jhb100_per2pok_pl_desc[] = {
{ .pin_start = 0, .pin_cnt = 10, .name = "gpio", .gpio_func_sel = 0 },
{ .pin_start = 10, .pin_cnt = 8, .name = "pwm_channel", .gpio_func_sel = 1 },
{ 0xff },
};
static const struct config_reg_layout_desc jhb100_per2pok_pinctrl_rl_desc[] = {
{
.pin_start = 0,
.pin_cnt = 18,
.fields[PAD_CFG_DRIVE_STRENGTH_2BIT] = { .shift = 0, .width = 2 },
.fields[PAD_CFG_INPUT_ENABLE] = { .shift = 2, .width = 1 },
.fields[PAD_CFG_PULL_DOWN] = { .shift = 3, .width = 1 },
.fields[PAD_CFG_PULL_UP] = { .shift = 4, .width = 1 },
.fields[PAD_CFG_SLEW_RATE] = { .shift = 5, .width = 1 },
.fields[PAD_CFG_SCHMITT_TRIGGER_SELECT] = { .shift = 6, .width = 1 },
.fields[PAD_CFG_DEBOUNCE_WIDTH] = { .shift = 15, .width = 17 },
},
{ 0xff },
};
static const struct starfive_pinctrl_regs jhb100_per2pok_pinctrl_regs = {
.func_sel = { .reg = 0x58, .width_per_pin = 2 },
.config = 0x04,
.output = 0x4c,
.output_en = 0x50,
.gpio_status = 0x54,
.irq_en = 0x60,
.irq_status = 0x64,
.irq_clr = 0x68,
.irq_trigger = 0x6c,
.irq_level = 0x70,
.irq_both_edge = 0x74,
.irq_edge = 0x78,
};
static const struct jhb100_pinctrl_func_maps jhb100_func_maps_per2pok[] = {
{ .func = "can", .val = 1 },
{ .func = "gpio", .val = 0,
.max_pin = JHB100_FUNC_MAPS_MAX_PIN(PADNUM_PER2POK_GPIO_D40) },
{ .func = "gpio", .val = 1,
.max_pin = JHB100_FUNC_MAPS_MAX_PIN(PADNUM_PER2POK_GPIO_D48) },
{ .func = "host0_port80", .val = 2 },
{ .func = "host1_port80", .val = 3 },
{ .func = "passthru", .val = 2,
.max_pin = JHB100_FUNC_MAPS_MAX_PIN(PADNUM_PER2POK_GPIO_D36) },
{ .func = "passthru", .val = 1,
.max_pin = JHB100_FUNC_MAPS_MAX_PIN(PADNUM_PER2POK_GPIO_D40) },
{ .func = "pwm", .val = 0 },
};
static const struct jhb100_pinctrl_domain_info jhb100_per2pok_pinctrl_info = {
.name = "jhb100-per2pok",
.pl_desc = jhb100_per2pok_pl_desc,
.crl_desc = jhb100_per2pok_pinctrl_rl_desc,
.regs = &jhb100_per2pok_pinctrl_regs,
.fmaps = jhb100_func_maps_per2pok,
.num_maps = ARRAY_SIZE(jhb100_func_maps_per2pok),
};
static const struct of_device_id jhb100_per2pok_pinctrl_of_match[] = {
{
.compatible = "starfive,jhb100-per2pok-pinctrl",
.data = &jhb100_per2pok_pinctrl_info,
},
{ }
};
MODULE_DEVICE_TABLE(of, jhb100_per2pok_pinctrl_of_match);
static struct platform_driver jhb100_per2pok_pinctrl_driver = {
.probe = jhb100_pinctrl_probe,
.driver = {
.name = "starfive-jhb100-per2pok-pinctrl",
.of_match_table = jhb100_per2pok_pinctrl_of_match,
},
};
module_platform_driver(jhb100_per2pok_pinctrl_driver);
MODULE_DESCRIPTION("Pinctrl driver for StarFive JHB100 SoC Peripheral-2 Power OK domain");
MODULE_AUTHOR("Alex Soo <yuklin.soo@starfivetech.com>");
MODULE_LICENSE("GPL"