/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
 * Dreamchip RPP-X1 ISP Driver - Userspace API
 *
 * Copyright (C) 2026 Renesas Electronics Corp.
 * Copyright (C) 2026 Ideas on Board Oy
 * Copyright (C) 2026 Ragnatech AB
 */

#ifndef __UAPI_RPP_X1_CONFIG_H
#define __UAPI_RPP_X1_CONFIG_H

#include <linux/media/v4l2-isp.h>

/**
 * struct rppx1_window - Measurement window
 *
 * RPP-X1 measurement window. Different blocks use a window or multiple
 * windows for measurement purposes. This defines a common type for all of
 * them. The number of relevant bits depends on the block where the window is
 * used and is specified in the per-block description
 *
 * @h_offs: horizontal offset from the left of the frame in pixels
 * @v_offs: vertical offset from the top of the frame in pixels
 * @h_size: horizontal size of the window in pixels
 * @v_size: vertical size of the window in pixels
 */
struct rppx1_window {
	__u16 h_offs;
	__u16 v_offs;
	__u16 h_size;
	__u16 v_size;
};

/**
 * enum rppx1_meas_chan - Measurement point for the Histogram and EXM Modules
 *
 * Measurement points for the RPP-X1 Histogram measurement module and Exposure
 * measurement module.
 *
 * All tap points are available for the PRE1/PRE2 pipes. Only
 * RPPX1_MEAS_CHAN_SEL4 and RPPX1_MEAS_CHAN_SEL7 are available for the
 * MAIN_POST pipe.
 *
 * @RPPX1_MEAS_CHAN_SEL0: after input acquisition
 * @RPPX1_MEAS_CHAN_SEL1: after black level subtraction
 * @RPPX1_MEAS_CHAN_SEL2: after sensor gamma linearization
 * @RPPX1_MEAS_CHAN_SEL3: after lens shading correction
 * @RPPX1_MEAS_CHAN_SEL4: after auto white balance gains
 * @RPPX1_MEAS_CHAN_SEL5: after defect pixel correction
 * @RPPX1_MEAS_CHAN_SEL6: after denoise pre-filter
 * @RPPX1_MEAS_CHAN_SEL7: after demosaicing
 */
enum rppx1_meas_chan {
	RPPX1_MEAS_CHAN_SEL0,
	RPPX1_MEAS_CHAN_SEL1,
	RPPX1_MEAS_CHAN_SEL2,
	RPPX1_MEAS_CHAN_SEL3,
	RPPX1_MEAS_CHAN_SEL4,
	RPPX1_MEAS_CHAN_SEL5,
	RPPX1_MEAS_CHAN_SEL6,
	RPPX1_MEAS_CHAN_SEL7,
};

/* ---------------------------------------------------------------------------
 * Parameter Structures
 *
 * The same ISP block might be instantiated in multiple pipeliness and operate
 * on a different bitdepth/precision. For fields of varying length among
 * different instances of the same block, use a data type that can accommodate
 * the larger bitdepth/precision.
 */

/**
 * enum rppx1_params_block_type - RPP-X1 extensible params block types
 *
 * NOTE: Only append to the enumeration as the numbers are uAPI.
 *
 * @RPPX1_PARAMS_BLOCK_TYPE_WBMEAS_POST: AWB Measurement Configuration
 * @RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE1: PRE1 pipe White Balance Gains
 * @RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE2: PRE2 White Balance Gains
 * @RPPX1_PARAMS_BLOCK_TYPE_AWBG_POST: MAIN_POST White Balance Gains
 * @RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE1: PRE1 pipe Exposure Measurement
 * @RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE2: PRE2 pipe Exposure Measurement
 * @RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE1: PRE1 pipe Histogram Measurement
 * @RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE2: PRE2 pipe Histogram Measurement
 * @RPPX1_PARAMS_BLOCK_TYPE_HIST_POST: POST pipe Histogram Measurement
 * @RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE1: PRE1 pipe Black Level Subtraction
 * @RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE2: PRE2 pipe Black Level Subtraction
 * @RPPX1_PARAMS_BLOCK_TYPE_CCOR_POST: POST pipe Color Correction
 * @RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE1: PRE1 pipe Lens Shading Correction
 * @RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE2: PRE2 pipe Lens Shading Correction
 * @RPPX1_PARAMS_BLOCK_TYPE_GA_HV: Human Vision Pipe Gamma Out Correction
 * @RPPX1_PARAMS_BLOCK_TYPE_GA_MV: Machine Vision Gamma Out Correction
 * @RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE1: PRE1 pipe Linearization (Sensor De-gamma)
 * @RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE2: PRE2 pipe Linearization (Sensor De-gamma)
 */
enum rppx1_params_block_type {
	RPPX1_PARAMS_BLOCK_TYPE_WBMEAS_POST,
	RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE1,
	RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE2,
	RPPX1_PARAMS_BLOCK_TYPE_AWBG_POST,
	RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE1,
	RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE2,
	RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE1,
	RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE2,
	RPPX1_PARAMS_BLOCK_TYPE_HIST_POST,
	RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE1,
	RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE2,
	RPPX1_PARAMS_BLOCK_TYPE_CCOR_POST,
	RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE1,
	RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE2,
	RPPX1_PARAMS_BLOCK_TYPE_GA_HV,
	RPPX1_PARAMS_BLOCK_TYPE_GA_MV,
	RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE1,
	RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE2,
};

/**
 * enum rppx1_wbmeas_mode - AWB measurement mode
 *
 * @RPPX1_WBMEAS_MODE_YCBCR: YCbCr measurement mode
 * @RPPX1_WBMEAS_MODE_RGB: RGB measurement mode
 */
enum rppx1_wbmeas_mode {
	RPPX1_WBMEAS_MODE_YCBCR,
	RPPX1_WBMEAS_MODE_RGB,
};

/**
 * struct rppx1_wbmeas_params - AWB measurement configuration
 *
 * The Auto-White Balance measurement module is available on the MAIN_POST pipe.
 * It supports two measurement modes, selected by the @mode field. The
 * measurement window is programmed through the @wnd field.
 *
 * To support measurement in YCbCr mode a color conversion matrix with
 * programmable offset is available in the @ccor_coeff and @ccor_offs fields.
 * The color conversion matrix coefficients are represented as 16 bits signed
 * Q4.12 numbers ranging from -8 to +7.99. The per-color channel offsets are
 * represented as 25 bits 2's complement integer numbers ranging from -16777216
 * to +16777215.
 *
 * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_WBMEAS_POST)
 * @wnd: measurement window
 * @mode: measurement mode (from enum rppx1_wbmeas_mode)
 * @ymax_cmp: enable Y_MAX compare using @max_y
 * @frames: number of frames for mean value calculation (0 = 1 frame)
 * @reserved: padding
 * @ref_cr_max_r: reference Cr or max red value in RGB mode, 24 bits
 * @ref_cb_max_b: reference Cb or max blue value in RGB mode, 24 bits
 * @min_y_max_g: luminance minimum value or max green value in RGB mode, 24 bits
 * @max_y: luminance maximum value, only valid if @mode is set to YCbCr and
 *	   @ymax_cmp is set to enabled, 24 bits
 * @max_csum: chrominance sum maximum value, 24 bits
 * @min_c: chrominance minimum value, 24 bits
 * @ccor_coeff: coefficients for color conversion matrix, signed 16 bits Q4.6
 * @reserved2: padding
 * @ccor_offs: R-G-B color conversion coefficients, signed 25 bits 2's complement
 * @reserved3: padding
 */
struct rppx1_wbmeas_params {
	struct v4l2_isp_params_block_header header;
	struct rppx1_window wnd;
	__u8 mode;
	__u8 ymax_cmp;
	__u8 frames;
	__u8 reserved;
	__u32 ref_cr_max_r;
	__u32 ref_cb_max_b;
	__u32 min_y_max_g;
	__u32 max_y;
	__u32 max_csum;
	__u32 min_c;
	__u16 ccor_coeff[3][3];
	__u16 reserved2;
	__u32 ccor_offs[3];
	__u32 reserved3;
};

/**
 * struct rppx1_awbg_params  - WB gain configuration
 *
 * The RPP-X1 White Balance Gain module is available in the PRE1 and PRE2
 * pre-fusion pipes and in the MAIN_POST post-fusion pipe. Userspace selects
 * which pipe to operate by setting the @header.type field to
 * RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE1, RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE2
 * or RPPX1_PARAMS_BLOCK_TYPE_AWBG_POST.
 *
 * The White Balance module allows to specify per-color channel gains, expressed
 * as unsigned fixed-point values as 18 bits unsigned integers in Q6.12 format
 * with a maximum of 63.999.
 *
 * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE1 or
 *	    type = RPPX1_PARAMS_BLOCK_TYPE_AWBG_PRE2 or
 *	    type = RPPX1_PARAMS_BLOCK_TYPE_AWBG_POST)
 * @gain_red: gain for red component, 18-bit (unsigned Q6.12)
 * @gain_green_r: gain for green component in red lines, 18-bit (unsigned Q6.12)
 * @gain_blue: gain for blue component, 18-bit (unsigned Q6.12)
 * @gain_green_b: gain for green component in blue lines, 18-bit (unsigned Q6.12)
 */
struct rppx1_awbg_params {
	struct v4l2_isp_params_block_header header;
	__u32 gain_red;
	__u32 gain_green_r;
	__u32 gain_blue;
	__u32 gain_green_b;
};

/**
 * enum rppx1_exm_mode - Exposure measurement mode
 *
 * Exaposure measurement mode selection (RGB/Bayer).
 *
 * @RPPX1_EXP_MEASURING_MODE_DISABLED: no measurement
 * @RPPX1_EXP_MEASURING_MODE_RGB: Y/R/G/B measurement
 * @RPPX1_EXP_MEASURING_MODE_BAYER: Bayer RGB measurement
 */
enum rppx1_exm_mode {
	RPPX1_EXP_MEASURING_MODE_DISABLED,
	RPPX1_EXP_MEASURING_MODE_RGB,
	RPPX1_EXP_MEASURING_MODE_BAYER,
};

/**
 * struct rppx1_exm_params - Exposure measurement configuration
 *
 * The RPP-X1 Exposure measurement unit is available on the PRE1 and PRE2
 * pre-fusion pipes. Userspace selects which pipe to operate by setting
 * the @header.type field to RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE1 or
 * RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE2.
 *
 * Exposure measurement is performed in the RGB or Bayer domain, according to
 * the setting of the @mode field. The exposure measurement tap point is
 * selected according to the value of @channel_sel.
 *
 * The exposure measurement is performed on an input window specified in @wnd.
 * To each color component a programmable weight coefficient is associated.
 * Coefficients are represented as unsigned 8 bits integer values in Q1.7 format
 * ranging from 0 to 1.992.
 *
 * The @last_line fields controls when the exposure measurement completes. It
 * is usually programmed to the value of (@wnd.v_offs + @wnd.v_size + 1).
 *
 * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE1 or
 *	    type = RPPX1_PARAMS_BLOCK_TYPE_EXM_PRE2)
 * @wnd: measurement window coordinates
 * @mode: exposure measure mode (from enum rppx1_exm_mode)
 * @last_line: line number for which the exposure measurement completes
 * @channel_sel: exposure measurement point (see enum rppx1_meas_chan)
 * @coeff_r: coefficient for the red Bayer sample or red color channel, Q1.7
 * @coeff_g_gr: coefficient for the green/red Bayer sample or green color channel, Q1.7
 * @coeff_b: coefficient for the blue Bayer sample or blue color channel, Q1.7
 * @coeff_gb: coefficient for the green/blue Bayer sample, unused in RGB mode, Q1.7
 * @reserved: padding
 */
struct rppx1_exm_params {
	struct v4l2_isp_params_block_header header;
	struct rppx1_window wnd;
	__u32 mode;
	__u32 last_line;
	__u8 channel_sel;
	__u8 coeff_r;
	__u8 coeff_g_gr;
	__u8 coeff_b;
	__u8 coeff_gb;
	__u8 reserved[3];
};

/* Histogram */
#define RPPX1_HIST_WEIGHT_GRIDS_SIZE 25

/**
 * enum rppx1_hist_mode - Histogram measurement mode
 *
 * Histogram measurement mode. Select which channel or combination of channels
 * the histogram measurement is performed on.
 *
 * @RPPX1_HIST_MODE_DISABLE: histogram disabled
 * @RPPX1_HIST_MODE_RGB_COMBINED: combined RGB histogram
 * @RPPX1_HIST_MODE_R_HISTOGRAM: red channel histogram
 * @RPPX1_HIST_MODE_GR_HISTOGRAM: green/red channel histogram
 * @RPPX1_HIST_MODE_B_HISTOGRAM: blue channel histogram
 * @RPPX1_HIST_MODE_GB_HISTOGRAM: green/blue histogram
 */
enum rppx1_hist_mode {
	RPPX1_HIST_MODE_DISABLE,
	RPPX1_HIST_MODE_RGB_COMBINED,
	RPPX1_HIST_MODE_R_HISTOGRAM,
	RPPX1_HIST_MODE_GR_HISTOGRAM,
	RPPX1_HIST_MODE_B_HISTOGRAM,
	RPPX1_HIST_MODE_GB_HISTOGRAM,
};

/**
 * struct rppx1_hist_params - Histogram measurement configuration
 *
 * The RPP-X1 Histogram measurement unit is available on the PRE1, PRE2 and
 * MAIN_POST pipes. Userspace selects which pipe to operate by setting the
 * @header.type field to RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE1,
 * RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE2 or
 * RPPX1_PARAMS_BLOCK_TYPE_HIST_POST.
 *
 * The histogram measurement point is selected using the @channel field while
 * histogram measurement mode is selected using the @mode field.
 *
 * Histogram measurement is performed by programming subsampling factors using
 * the @v_stepsize and @h_step_inc fields and by weighted windowing, by
 * programming the size of the measurement window @wnd with @weights associated
 * to each cell of the 5x5 measurement grid. Weights are represented as 5 bits
 * integer values ranging from 0 to 16.
 *
 * The @last_line fields controls when the histogram measurement completes. It
 * is usually programmed to the value of (@wnd.v_offs + @wnd.v_size - 1).
 *
 * Histogram values are calculated by applying a per-color channel coefficient
 * represented as an 8 bits unsigned Q1.7 integer value. The @sample_offs and
 * @sample_shift fields allow to reduce the color dynamic range on which
 * histogram data are produced.
 *
 * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE1,
 *	    type = RPPX1_PARAMS_BLOCK_TYPE_HIST_PRE2 or
 *	    type = RPPX1_PARAMS_BLOCK_TYPE_HIST_POST)
 * @wnd: measurement window coordinates
 * @last_line: line number for which the histogram measurement completes
 * @v_stepsize: vertical subsampling divider, 7 bits
 * @h_step_inc: horizontal subsampling step counter, 17 bits
 * @sample_offs: sample offset, 24 bits
 * @mode: histogram measurement mode (from enum rppx1_hist_mode)
 * @channel_sel: histogram measurement point (see enum rppx1_meas_chan)
 * @weights: weighting factors for each sub-window (5x5 grid)
 * @coeff: R-G-B coefficients, 8 bits unsigned Q1.7
 * @sample_shift: sample shift, 4 bits
 * @reserved: padding
 */
struct rppx1_hist_params {
	struct v4l2_isp_params_block_header header;
	struct rppx1_window wnd;
	__u32 last_line;
	__u32 v_stepsize;
	__u32 h_step_inc;
	__u32 sample_offs;
	__u8 mode;
	__u8 channel_sel;
	__u8 weights[RPPX1_HIST_WEIGHT_GRIDS_SIZE];
	__u8 coeff[3];
	__u8 sample_shift;
	__u8 reserved;
};

/**
 * struct rppx1_bls_fixed - BLS fixed subtraction values
 *
 * Fixed black level values subtracted from sensor data per Bayer channel.
 * Negative values result in addition.
 *
 * The PRE1 pipe BLS module operates on a 24-bits input data and fixed black
 * levels are stored as a signed 2's complement representation ranging from
 * -2^24 to 2^24-1.
 *
 * The PRE2 pipe BLS module operates on a 12-bits input data and fixed black
 * levels are stored as a signed 2's complement representation ranging from
 * -2^12 to 2^12-1.
 *
 * Userspace is expected to provide fixed black level values with a bit-depth
 * matching the one of pipe in use.
 *
 * These subtraction values are matched with the sensor native Bayer components
 * ordering according to the cropping configuration on the input port.
 *
 * @a: subtraction value for channel A
 * @b: subtraction value for channel B
 * @c: subtraction value for channel C
 * @d: subtraction value for channel D
 */
struct rppx1_bls_fixed {
	__u32 a;
	__u32 b;
	__u32 c;
	__u32 d;
};

/**
 * enum rppx1_bls_mode - BLS subtraction mode
 *
 * Select if subtracted black level come from fixed or measured values.
 *
 * @RPPX1_BLS_MODE_FIXED: subtract fixed values
 * @RPPX1_BLS_MODE_MEAS: subtract measured values
 */
enum rppx1_bls_mode {
	RPPX1_BLS_MODE_FIXED,
	RPPX1_BLS_MODE_MEAS,
};

/**
 * enum rppx1_bls_win_en: BLS measurement configuration
 *
 * Select the measurement window to use for measured black level values.
 *
 * @RPPX1_BLS_WIN_EN_OFF: disable measurement
 * @RPPX1_BLS_WIN_EN_WIN1: Enable measurement from window 1
 * @RPPX1_BLS_WIN_EN_WIN2: enable measurement from window 2
 * @RPPX1_BLS_WIN_EN_WIN12: enable measurement from window 1 and window 2
 */
enum rppx1_bls_win_en {
	RPPX1_BLS_WIN_EN_OFF,
	RPPX1_BLS_WIN_EN_WIN1,
	RPPX1_BLS_WIN_EN_WIN2,
	RPPX1_BLS_WIN_EN_WIN12,
};

/**
 * struct rppx1_bls_params - RPP-X1 Black Level Subtraction Module
 *
 * The RPP-X1 Black Level Subtraction module is available on the PRE1 and PRE2
 * pre-fusion pipes. Userspace selects which pipe to operate by setting the
 * @header.type field to RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE1 or
 * RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE2.
 *
 * The BLS module operates on fixed or measured data according to the setting of
 * the @mode field. When RPPX1_BLS_MODE_FIXED is used userspace shall provide
 * the per-channel black levels in @fixed. When RPPX1_BLS_MODE_MEAS is used
 * userspace shall configure the measurement windows @window1 and optionally
 * @window2 to select the optically black pixels region in the input frame. The
 * @samples fields controls how many measure samples are used for averaging the
 * measured black levels.
 *
 * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE1 or
 *	    type == RPPX1_PARAMS_BLOCK_TYPE_BLS_PRE2)
 * @window1: BLS measurement window 1 (14 bits)
 * @window2: BLS measurement window 2 (14 bits)
 * @fixed: fixed subtraction values (see enum rppx1_bls_fixed)
 * @mode: BLS subtraction mode (see enum rppx1_bls_mode)
 * @en_windows: BLS measurement mode (see rppx1_bls_win_en)
 * @samples: log2 of the number of measured pixels per Bayer position
 * @reserved: padding
 */
struct rppx1_bls_params {
	struct v4l2_isp_params_block_header header;
	struct rppx1_window window1;
	struct rppx1_window window2;
	struct rppx1_bls_fixed fixed;
	__u8 mode;
	__u8 en_windows;
	__u8 samples;
	__u8 reserved[5];
};

/**
 * struct rppx1_ccor_params - Color CORrection configuration
 *
 * The CCOR (Color Correction) module is available on the MAIN_POST pipe. It
 * performs color space correction on a pixel-per-pixel basis using a 3x3 matrix
 * of coefficients and per-color channel offsets.
 *
 * The matrix coefficients are represented as 16 bits signed fixed point values
 * in Q4.12 format ranging from -8 to +7.999.
 *
 * The per-channel color offsets are represented as 2's complement values
 * stored in 25 bits ranging from -16777216 to 16777215.
 *
 * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_CCOR_POST)
 * @coeff: color correction matrix coefficients, 16 bits signed Q4.12
 * @reserved: padding
 * @offset: R, G, B offsets, 2's complement 25 bits
 */
struct rppx1_ccor_params {
	struct v4l2_isp_params_block_header header;
	__u16 coeff[3][3];
	__u16 reserved;
	__u32 offset[3];
};

/* Lens Shade Correction */
#define RPPX1_LSC_SAMPLES_MAX 17
#define RPPX1_LSC_NUM_SECTORS 16

/**
 * struct rppx1_lsc_params - Lens Shading Correction configuration
 *
 * The RPP-X1 Lens shading correction module is available on the PRE1 and PRE2
 * pre-fusion pipes. Userspace selects which pipe to operate by setting the
 * @header.type field to RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE1 or
 * RPPX1_PARAMS_BLOCK_TYPE_LSC_PRE2.
 *
 * The module applies per-color channel correction factors @r_data, @gr_data,
 * @gb_data and @b_data as a 16x16 grid mapped on the image. The size of each
 * grid segment is expressed by the @x_sect_size and @y_sect_size arrays.  Each
 * segment shall be at least 8 pixels in size and the sum of all horizontal
 * segments @x_sect_size shall match the input frame size width.
 *
 * The correction factors values are expressed as unsigned Q2.10 integers
 * ranging from 1 to 3.999.
 *
 * Pre-calculated interpolation factors shall be provided in the @x_grad
 * and @y_grad fields, expressed as 12 bits integer values.
 *
 * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_LSC)
 * @r_data: correction factors for the red channel in Q2.10 format
 * @gr_data: correction factors for the green (red) channel in Q2.10 format
 * @gb_data: correction factors for the green (blue) channel in Q2.10 format
 * @b_data: correction factors for the blue channel in Q2.10 format
 * @x_grad: Interpolation gradients for each horizontal sector (12 bits)
 * @y_grad: Interpolation gradients for each vertical sector (12 bits)
 * @x_sect_size: Horizontal sectors sizes
 * @y_sect_size: Vertical sectors sizes
 */
struct rppx1_lsc_params {
	struct v4l2_isp_params_block_header header;
	__u16 r_data[RPPX1_LSC_SAMPLES_MAX][RPPX1_LSC_SAMPLES_MAX];
	__u16 gr_data[RPPX1_LSC_SAMPLES_MAX][RPPX1_LSC_SAMPLES_MAX];
	__u16 gb_data[RPPX1_LSC_SAMPLES_MAX][RPPX1_LSC_SAMPLES_MAX];
	__u16 b_data[RPPX1_LSC_SAMPLES_MAX][RPPX1_LSC_SAMPLES_MAX];
	__u16 x_grad[RPPX1_LSC_NUM_SECTORS];
	__u16 y_grad[RPPX1_LSC_NUM_SECTORS];
	__u16 x_sect_size[RPPX1_LSC_NUM_SECTORS];
	__u16 y_sect_size[RPPX1_LSC_NUM_SECTORS];
};

/* Gamma Out */
#define RPPX1_GA_MAX_SAMPLES 17

/**
 * enum rppx1_ga_seg_mode - Gamma out curve segmentation mode
 *
 * Segmentation mode of the 16 input sampling points for the Gamma Out
 * Correction module.
 *
 * @RPPX1_GA_SEG_MODE_LOGARITHMIC: logarithmic-like segmentation mode
 * @RPPX1_GA_SEG_MODE_EQUIDISTANT: equidistant segmentation mode
 */
enum rppx1_ga_seg_mode {
	RPPX1_GA_SEG_MODE_LOGARITHMIC,
	RPPX1_GA_SEG_MODE_EQUIDISTANT
};

/**
 * struct rppx1_ga_params - Gamma Out Correction configuration
 *
 * The Gamma Out Correction module is available on the Human Vision Output
 * Pipe (HV) and the Machine Vision Output Pipe (MV). Userspace selects
 * which pipe to operate by setting the @header.type field to
 * RPPX1_PARAMS_BLOCK_TYPE_GA_HV or RPPX1_PARAMS_BLOCK_TYPE_GA_MV.
 *
 * The module allows to apply a @gamma_y gamma correction curve to RGB data
 * represented as a table of 16 entries. The 16 input sampling points can be
 * equidistant or segmented using a logarithmic scale according to the value of
 * @mode.
 *
 * The gamma curve values are 12 bits on the HV output pipe and 24 bits on the
 * MV output pipe. Userspace is expected to provide the curve values with a
 * bit-depth matching the one of pipe in use.
 *
 * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_GA_HV or
 *	    type = RPPX1_PARAMS_BLOCK_TYPE_GA_MV)
 * @gamma_y: gamma out curve y-axis values
 * @mode: gamma curve input segmentation mode (see rppx1_ga_seg_mode)
 * @reserved: padding
 */
struct rppx1_ga_params {
	struct v4l2_isp_params_block_header header;
	__u32 gamma_y[RPPX1_GA_MAX_SAMPLES];
	__u8 mode;
	__u8 reserved[3];
};

/* Linearization (Sensor De-gamma) */
#define RPPX1_LIN_SAMPLE_POINTS_NUM 16
#define RPPX1_LIN_DEGAMMA_CURVE_NUM 17

/**
 * struct rppx1_lin_params - Linearization (Sensor De-gamma) configuration
 *
 * The RPP-X1 linearization module is available on the PRE1 and PRE2 pre-fusion
 * pipes. Userspace selects which pipe to operate by setting the @header.type
 * field to RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE1 or
 * RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE2.
 *
 * The LIN module applies the per-color channel de-gamma linearization curves
 * @curve_r, @curve_g and @curve_b defined on the input sampling points @dx.
 *
 * For the PRE1 pipe the de-gamma curves values are 24-bits, for the PRE2 pipe
 * the de-gamma curve values are 12-bits.
 *
 * For the PRE1 pipe de-gamma module sampling points @dx values are in the range
 * [0, 15] (4 bits). For the PRE2 pipe de-gamma module sampling points values
 * are in the range [0, 7] (3 bits).
 *
 * Userspace is expected to provide the curve values and sampling points with a
 * bit-depth matching the one of pipe in use.
 *
 * @header: block header (type = RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE1 or
 *	    RPPX1_PARAMS_BLOCK_TYPE_LIN_PRE2)
 * @curve_r: de-gamma linearization curve for red channel
 * @curve_g: de-gamma linearization curve for green channel
 * @curve_b: de-gamma linearization curve for blue channel
 * @dx: input sampling points
 * @reserved: padding
 */
struct rppx1_lin_params {
	struct v4l2_isp_params_block_header header;
	__u32 curve_r[RPPX1_LIN_DEGAMMA_CURVE_NUM];
	__u32 curve_g[RPPX1_LIN_DEGAMMA_CURVE_NUM];
	__u32 curve_b[RPPX1_LIN_DEGAMMA_CURVE_NUM];
	__u8 dx[RPPX1_LIN_SAMPLE_POINTS_NUM];
	__u32 reserved;
};

/**
 * RPPX1_PARAMS_MAX_SIZE - Maximum size of all RPP-X1 parameter blocks
 *
 * Some types are reported twice as the same block might be instantiated in
 * multiple pipes.
 */
#define RPPX1_PARAMS_MAX_SIZE						\
	(sizeof(struct rppx1_wbmeas_params)			+	\
	sizeof(struct rppx1_awbg_params)			+	\
	sizeof(struct rppx1_awbg_params)			+	\
	sizeof(struct rppx1_awbg_params)			+	\
	sizeof(struct rppx1_exm_params)				+	\
	sizeof(struct rppx1_exm_params)				+	\
	sizeof(struct rppx1_hist_params)			+	\
	sizeof(struct rppx1_hist_params)			+	\
	sizeof(struct rppx1_hist_params)			+	\
	sizeof(struct rppx1_bls_params)				+	\
	sizeof(struct rppx1_bls_params)				+	\
	sizeof(struct rppx1_ccor_params)			+	\
	sizeof(struct rppx1_lsc_params)				+	\
	sizeof(struct rppx1_lsc_params)				+	\
	sizeof(struct rppx1_ga_params)				+	\
	sizeof(struct rppx1_ga_params)				+	\
	sizeof(struct rppx1_lin_params)				+	\
	sizeof(struct rppx1_lin_params))

/* ---------------------------------------------------------------------------
 * Statistics Structures
 *
 * The same ISP block might be instantiated in multiple pipeliness and operate
 * on a different bitdepth/precision. For fields of varying length among
 * different instances of the same block, use a data type that can accommodate
 * the larger bitdepth/precision.
 */

/**
 * enum rppx1_stats_block_type - RPP-X1 extensible stats block types
 *
 * NOTE: Only append to the enumeration as the numbers are uAPI.
 *
 * @RPPX1_STATS_BLOCK_TYPE_WBMEAS_POST: post-fusion white-balance measurement
 * @RPPX1_STATS_BLOCK_TYPE_EXM_PRE1: pre-fusion pipe1 exposure measurement
 * @RPPX1_STATS_BLOCK_TYPE_EXM_PRE2: pre-fusion pipe2 exposure measurement
 * @RPPX1_STATS_BLOCK_TYPE_HIST_PRE1: pre-fusion pipe1 histogram
 * @RPPX1_STATS_BLOCK_TYPE_HIST_PRE2: pre-fusion pipe2 histogram
 * @RPPX1_STATS_BLOCK_TYPE_HIST_POST: post-fusion histogram
 */
enum rppx1_stats_block_type {
	RPPX1_STATS_BLOCK_TYPE_WBMEAS_POST,
	RPPX1_STATS_BLOCK_TYPE_EXM_PRE1,
	RPPX1_STATS_BLOCK_TYPE_EXM_PRE2,
	RPPX1_STATS_BLOCK_TYPE_HIST_PRE1,
	RPPX1_STATS_BLOCK_TYPE_HIST_PRE2,
	RPPX1_STATS_BLOCK_TYPE_HIST_POST,
};

/**
 * struct rppx1_wbmeas_stats - AWB statistics
 *
 * @header: block header (type = RPPX1_STATS_BLOCK_TYPE_WBMEAS_POST)
 * @cnt: Number of pixels matched
 * @mean_y_or_g: mean Y (or G in RGB mode) value, 24-bit
 * @mean_cb_or_b: mean Cb (or B in RGB mode) value, 24-bit
 * @mean_cr_or_r: mean Cr (or R in RGB mode) value, 24-bit
 */
struct rppx1_wbmeas_stats {
	struct v4l2_isp_block_header header;
	__u32 cnt;
	__u32 mean_y_or_g;
	__u32 mean_cb_or_b;
	__u32 mean_cr_or_r;
};

/* Exposure Measurement */
#define RPPX1_EXM_NUM_WIN 25

/**
 * struct rppx1_exm_stats - Exposure measurement
 *
 * RPP-X1 exposure measurement calculates the mean value on 25 programmable
 * windows on the input picture.
 *
 * @header: block header (type = RPPX1_STATS_BLOCK_TYPE_EXM_PRE1)
 * @exp_mean: mean luminance values per block, up to 20-bit
 * @reserved: padding
 */
struct rppx1_exm_stats {
	struct v4l2_isp_block_header header;
	__u32 exp_mean[RPPX1_EXM_NUM_WIN];
	__u32 reserved;
};

/* Histogram */
#define RPPX1_HIST_NUM_BINS 32

/**
 * struct rppx1_hist_stats - Histogram statistics
 *
 * @header: block header (type = RPPX1_STATS_BLOCK_TYPE_HIST_POST)
 * @hist_bins: accumulation histogram results in unsigned 20-bit Q16.4 format
 */
struct rppx1_hist_stats {
	struct v4l2_isp_block_header header;
	__u32 hist_bins[RPPX1_HIST_NUM_BINS];
};

/**
 * RPPX1_STATS_MAX_SIZE - Maximum size of all RPP-X1 statistics
 *
 * Some types are reported twice as the same block might be instantiated in
 * multiple pipes.
 */
#define RPPX1_STATS_MAX_SIZE						\
	(sizeof(struct rppx1_wbmeas_stats)			+	\
	sizeof(struct rppx1_exm_stats)				+	\
	sizeof(struct rppx1_exm_stats)				+	\
	sizeof(struct rppx1_hist_stats)				+	\
	sizeof(struct rppx1_hist_stats)				+	\
	sizeof(struct rppx1_hist_stats))

#endif /* __UAPI_RPP_X1_CONFIG_H */