/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries. * All rights reserved. */ #ifndef WILC_WLAN_IF_H #define WILC_WLAN_IF_H #include <linux/netdevice.h> #include "fw.h" #define WILC_MAX_ASSOC_RESP_FRAME_SIZE 512 /******************************************** * * Wlan Configuration ID * ********************************************/ enum bss_types { WILC_FW_BSS_TYPE_INFRA = 0, WILC_FW_BSS_TYPE_INDEPENDENT, WILC_FW_BSS_TYPE_AP, }; enum { WILC_FW_OPER_MODE_B_ONLY = 0, /* 1, 2 M, otherwise 5, 11 M */ WILC_FW_OPER_MODE_G_ONLY, /* 6,12,24 otherwise 9,18,36,48,54 */ WILC_FW_OPER_MODE_G_MIXED_11B_1, /* 1,2,5.5,11 otherwise all on */ WILC_FW_OPER_MODE_G_MIXED_11B_2, /* 1,2,5,11,6,12,24 otherwise all on */ }; enum { WILC_FW_PREAMBLE_SHORT = 0, /* Short Preamble */ WILC_FW_PREAMBLE_LONG = 1, /* Long Preamble */ WILC_FW_PREAMBLE_AUTO = 2, /* Auto Preamble Selection */ }; enum { WILC_FW_PASSIVE_SCAN = 0, WILC_FW_ACTIVE_SCAN = 1, }; enum { WILC_FW_NO_POWERSAVE = 0, WILC_FW_MIN_FAST_PS = 1, WILC_FW_MAX_FAST_PS = 2, WILC_FW_MIN_PSPOLL_PS = 3, WILC_FW_MAX_PSPOLL_PS = 4 }; enum bus_acquire { WILC_BUS_ACQUIRE_ONLY = 0, WILC_BUS_ACQUIRE_AND_WAKEUP = 1, }; enum bus_release { WILC_BUS_RELEASE_ONLY = 0, WILC_BUS_RELEASE_ALLOW_SLEEP = 1, }; enum { WILC_FW_NO_ENCRYPT = 0, WILC_FW_ENCRYPT_ENABLED = BIT(0), WILC_FW_WEP = BIT(1), WILC_FW_WEP_EXTENDED = BIT(2), WILC_FW_WPA = BIT(3), WILC_FW_WPA2 = BIT(4), WILC_FW_AES = BIT(5), WILC_FW_TKIP = BIT(6) }; enum { WILC_FW_SEC_NO = WILC_FW_NO_ENCRYPT, WILC_FW_SEC_WEP = WILC_FW_WEP | WILC_FW_ENCRYPT_ENABLED, WILC_FW_SEC_WEP_EXTENDED = WILC_FW_WEP_EXTENDED | WILC_FW_SEC_WEP, WILC_FW_SEC_WPA = WILC_FW_WPA | WILC_FW_ENCRYPT_ENABLED, WILC_FW_SEC_WPA_AES = WILC_FW_AES | WILC_FW_SEC_WPA, WILC_FW_SEC_WPA_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA, WILC_FW_SEC_WPA2 = WILC_FW_WPA2 | WILC_FW_ENCRYPT_ENABLED, WILC_FW_SEC_WPA2_AES = WILC_FW_AES | WILC_FW_SEC_WPA2, WILC_FW_SEC_WPA2_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA2 }; enum authtype { WILC_FW_AUTH_OPEN_SYSTEM = 1, WILC_FW_AUTH_SHARED_KEY = 2, WILC_FW_AUTH_ANY = 3, WILC_FW_AUTH_IEEE8021 = 5, WILC_FW_AUTH_SAE = 7, WILC_FW_AUTH_IEE8021X_SHA256 = 9, WILC_FW_AUTH_OPEN_SYSTEM_SHA256 = 13 }; enum mfptype { WILC_FW_MFP_NONE = 0x0, WILC_FW_MFP_OPTIONAL = 0x1, WILC_FW_MFP_REQUIRED = 0x2 }; enum site_survey { WILC_FW_SITE_SURVEY_1CH = 0, WILC_FW_SITE_SURVEY_ALL_CH = 1, WILC_FW_SITE_SURVEY_OFF = 2 }; enum { WILC_FW_ACK_POLICY_NORMAL = 0, WILC_FW_ACK_NO_POLICY, }; enum { WILC_FW_REKEY_POLICY_DISABLE = 1, WILC_FW_REKEY_POLICY_TIME_BASE, WILC_FW_REKEY_POLICY_PKT_BASE, WILC_FW_REKEY_POLICY_TIME_PKT_BASE }; enum { WILC_FW_FILTER_NO = 0x00, WILC_FW_FILTER_AP_ONLY = 0x01, WILC_FW_FILTER_STA_ONLY = 0x02 }; enum { WILC_FW_11N_PROT_AUTO = 0, /* Auto */ WILC_FW_11N_NO_PROT, /* Do not use any protection */ WILC_FW_11N_PROT_ERP, /* Protect all ERP frame exchanges */ WILC_FW_11N_PROT_HT, /* Protect all HT frame exchanges */ WILC_FW_11N_PROT_GF /* Protect all GF frame exchanges */ }; enum { WILC_FW_ERP_PROT_SELF_CTS, WILC_FW_ERP_PROT_RTS_CTS, }; enum { WILC_FW_11N_OP_MODE_HT_MIXED = 1, WILC_FW_11N_OP_MODE_HT_ONLY_20MHZ, WILC_FW_11N_OP_MODE_HT_ONLY_20_40MHZ, }; enum { WILC_FW_OBBS_NONHT_NO_DETECT = 0, WILC_FW_OBBS_NONHT_DETECT_ONLY = 1, WILC_FW_OBBS_NONHT_DETECT_PROTECT = 2, WILC_FW_OBBS_NONHT_DETECT_PROTECT_REPORT = 3, }; enum { WILC_FW_HT_PROT_RTS_CTS_NONHT = 0, /* RTS-CTS at non-HT rate */ WILC_FW_HT_PROT_FIRST_FRAME_NONHT, /* First frame at non-HT rate */ WILC_FW_HT_PROT_LSIG_TXOP, /* LSIG TXOP Protection */ WILC_FW_HT_PROT_FIRST_FRAME_MIXED, /* First frame at Mixed format */ }; enum { WILC_FW_SMPS_MODE_STATIC = 1, WILC_FW_SMPS_MODE_DYNAMIC = 2, WILC_FW_SMPS_MODE_MIMO = 3, /* power save disable */ }; enum { WILC_FW_TX_RATE_AUTO = 0, WILC_FW_TX_RATE_MBPS_1 = 1, WILC_FW_TX_RATE_MBPS_2 = 2, WILC_FW_TX_RATE_MBPS_5_5 = 5, WILC_FW_TX_RATE_MBPS_11 = 11, WILC_FW_TX_RATE_MBPS_6 = 6, WILC_FW_TX_RATE_MBPS_9 = 9, WILC_FW_TX_RATE_MBPS_12 = 12, WILC_FW_TX_RATE_MBPS_18 = 18, WILC_FW_TX_RATE_MBPS_24 = 24, WILC_FW_TX_RATE_MBPS_36 = 36, WILC_FW_TX_RATE_MBPS_48 = 48, WILC_FW_TX_RATE_MBPS_54 = 54 }; enum { WILC_FW_DEFAULT_SCAN = 0, WILC_FW_USER_SCAN = BIT(0), WILC_FW_OBSS_PERIODIC_SCAN = BIT(1), WILC_FW_OBSS_ONETIME_SCAN = BIT(2) }; enum { WILC_FW_ACTION_FRM_IDX = 0, WILC_FW_PROBE_REQ_IDX = 1, WILC_FW_AUTH_REQ_IDX = 2 }; enum wid_type { WID_CHAR = 0, WID_SHORT = 1, WID_INT = 2, WID_STR = 3, WID_BIN_DATA = 4, WID_BIN = 5, }; struct wid { u16 id; enum wid_type type; s32 size; s8 *val; }; enum { WID_NIL = 0xffff, /* * BSS Type * ----------------------------------------------------------- * Configuration : Infrastructure Independent Access Point * Values to set : 0 1 2 * ----------------------------------------------------------- */ WID_BSS_TYPE = 0x0000, /* * Transmit Rate * ----------------------------------------------------------- * Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 * Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 * ----------------------------------------------------------- */ WID_CURRENT_TX_RATE = 0x0001, /* * Channel * ----------------------------------------------------------- * Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 * Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 * ----------------------------------------------------------- */ WID_CURRENT_CHANNEL = 0x0002, /* * Preamble * ----------------------------------------------------------- * Configuration : short long Auto * Values to set : 0 1 2 * ----------------------------------------------------------- */ WID_PREAMBLE = 0x0003, /* * 11g operating mode (ignored if 11g not present) * ----------------------------------------------------------- * Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) * Values to set : 1 2 3 * ----------------------------------------------------------- */ WID_11G_OPERATING_MODE = 0x0004, /* * Mac status (response only) * ----------------------------------------------------------- * Configuration : disconnect connect * Values to get : 0 1 * ----------------------------------------------------------- */ WID_STATUS = 0x0005, /* * Scan type * ----------------------------------------------------------- * Configuration : Passive Scanning Active Scanning * Values to set : 0 1 * ----------------------------------------------------------- */ WID_SCAN_TYPE = 0x0007, /* * Key Id (WEP default key Id) * ----------------------------------------------------------- * Configuration : Any value between 0 to 3 * Values to set : Same value. Default is 0 * ----------------------------------------------------------- */ WID_KEY_ID = 0x0009, /* * QoS Enable * ----------------------------------------------------------- * Configuration : QoS Disable WMM Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_QOS_ENABLE = 0x000A, /* * Power Management * ----------------------------------------------------------- * Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE * Values to set : 0 1 2 * ----------------------------------------------------------- */ WID_POWER_MANAGEMENT = 0x000B, /* * WEP/802 11I Configuration * ----------------------------------------------------------- * Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP * Values (0x) : 00 03 07 29 49 31 51 * Configuration:WPA-AES+TKIP RSN-AES+TKIP * Values (0x) : 69 71 * ----------------------------------------------------------- */ WID_11I_MODE = 0x000C, /* * WEP Configuration: Used in BSS STA mode only when WEP is enabled * ----------------------------------------------------------- * Configuration : Open System Shared Key Any Type | 802.1x Auth * Values (0x) : 01 02 03 | BIT2 * ----------------------------------------------------------- */ WID_AUTH_TYPE = 0x000D, /* * Site Survey Type * ----------------------------------------------------------- * Configuration : Values to set * Survey 1 Channel : 0 * survey all Channels : 1 * Disable Site Survey : 2 * ----------------------------------------------------------- */ WID_SITE_SURVEY = 0x000E, /* * Listen Interval * ----------------------------------------------------------- * Configuration : Any value between 1 to 255 * Values to set : Same value. Default is 3 * ----------------------------------------------------------- */ WID_LISTEN_INTERVAL = 0x000F, /* * DTIM Period * ----------------------------------------------------------- * Configuration : Any value between 1 to 255 * Values to set : Same value. Default is 3 * ----------------------------------------------------------- */ WID_DTIM_PERIOD = 0x0010, /* * ACK Policy * ----------------------------------------------------------- * Configuration : Normal Ack No Ack * Values to set : 0 1 * ----------------------------------------------------------- */ WID_ACK_POLICY = 0x0011, /* * Reset MAC (Set only) * ----------------------------------------------------------- * Configuration : Don't Reset Reset No Request * Values to set : 0 1 2 * ----------------------------------------------------------- */ WID_RESET = 0x0012, /* * Broadcast SSID Option: Setting this will adhere to "" SSID element * ----------------------------------------------------------- * Configuration : Enable Disable * Values to set : 1 0 * ----------------------------------------------------------- */ WID_BCAST_SSID = 0x0015, /* * Disconnect (Station) * ----------------------------------------------------------- * Configuration : Association ID * Values to set : Association ID * ----------------------------------------------------------- */ WID_DISCONNECT = 0x0016, /* * 11a Tx Power Level * ----------------------------------------------------------- * Configuration : Sets TX Power (Higher the value greater the power) * Values to set : Any value between 0 and 63 (inclusive Default 48) * ----------------------------------------------------------- */ WID_TX_POWER_LEVEL_11A = 0x0018, /* * Group Key Update Policy Selection * ----------------------------------------------------------- * Configuration : Disabled timeBased packetBased timePacketBased * Values to set : 1 2 3 4 * ----------------------------------------------------------- */ WID_REKEY_POLICY = 0x0019, /* * Allow Short Slot * ----------------------------------------------------------- * Configuration : Disallow Short Slot Allow Short Slot * (Enable Only Long Slot) (Enable Short Slot if applicable) * Values to set : 0 1 * ----------------------------------------------------------- */ WID_SHORT_SLOT_ALLOWED = 0x001A, WID_PHY_ACTIVE_REG = 0x001B, /* * 11b Tx Power Level * ----------------------------------------------------------- * Configuration : Sets TX Power (Higher the value greater the power) * Values to set : Any value between 0 and 63 (inclusive Default 48) * ----------------------------------------------------------- */ WID_TX_POWER_LEVEL_11B = 0x001D, /* * Scan Request * ----------------------------------------------------------- * Configuration : Request default scan * Values to set : 0 * ----------------------------------------------------------- */ WID_START_SCAN_REQ = 0x001E, /* * Rssi (get only) * ----------------------------------------------------------- * Configuration : * Values to get : Rssi value * ----------------------------------------------------------- */ WID_RSSI = 0x001F, /* * Join Request * ----------------------------------------------------------- * Configuration : Request to join * Values to set : index of scan result * ----------------------------------------------------------- */ WID_JOIN_REQ = 0x0020, WID_LINKSPEED = 0x0026, /* * Enable User Control of TX Power * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_USER_CONTROL_ON_TX_POWER = 0x0027, WID_MEMORY_ACCESS_8BIT = 0x0029, /* * Enable Auto RX Sensitivity feature * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_AUTO_RX_SENSITIVITY = 0x0032, /* * Receive Buffer Based Ack * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_DATAFLOW_CONTROL = 0x0033, /* * Scan Filter * ----------------------------------------------------------- * Configuration : Class No filter AP only Station Only * Values to set : 0 1 2 * Configuration : Priority High Rssi Low Rssi Detect * Values to set : 0 0x4 0x0 * Configuration : Channel filter off filter on * Values to set : 0 0x10 * ----------------------------------------------------------- */ WID_SCAN_FILTER = 0x0036, /* * Link Loss Threshold (measure in the beacon period) * ----------------------------------------------------------- * Configuration : Any value between 10 and 254(Set to 255 disable) * Values to set : Same value. Default is 10 * ----------------------------------------------------------- */ WID_LINK_LOSS_THRESHOLD = 0x0037, WID_ABORT_RUNNING_SCAN = 0x003E, /* NMAC Character WID list */ WID_WPS_START = 0x0043, /* * Protection mode for MAC * ----------------------------------------------------------- * Configuration : Auto No protection ERP HT GF * Values to set : 0 1 2 3 4 * ----------------------------------------------------------- */ WID_11N_PROT_MECH = 0x0080, /* * ERP Protection type for MAC * ----------------------------------------------------------- * Configuration : Self-CTS RTS-CTS * Values to set : 0 1 * ----------------------------------------------------------- */ WID_11N_ERP_PROT_TYPE = 0x0081, /* * HT Option Enable * ----------------------------------------------------------- * Configuration : HT Enable HT Disable * Values to set : 1 0 * ----------------------------------------------------------- */ WID_11N_ENABLE = 0x0082, /* * 11n Operating mode (Note that 11g operating mode will also be * used in addition to this, if this is set to HT Mixed mode) * ----------------------------------------------------------- * Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz * Values to set : 1 2 3 * ----------------------------------------------------------- */ WID_11N_OPERATING_MODE = 0x0083, /* * 11n OBSS non-HT STA Detection flag * ----------------------------------------------------------- * Configuration : Do not detect * Values to set : 0 * Configuration : Detect, do not protect or report * Values to set : 1 * Configuration : Detect, protect and do not report * Values to set : 2 * Configuration : Detect, protect and report to other BSS * Values to set : 3 * ----------------------------------------------------------- */ WID_11N_OBSS_NONHT_DETECTION = 0x0084, /* * 11n HT Protection Type * ----------------------------------------------------------- * Configuration : RTS-CTS First Frame Exchange at non-HT-rate * Values to set : 0 1 * Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt * Values to set : 2 3 * ----------------------------------------------------------- */ WID_11N_HT_PROT_TYPE = 0x0085, /* * 11n RIFS Protection Enable Flag * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_11N_RIFS_PROT_ENABLE = 0x0086, /* * SMPS Mode * ----------------------------------------------------------- * Configuration : Static Dynamic MIMO (Power Save Disabled) * Values to set : 1 2 3 * ----------------------------------------------------------- */ WID_11N_SMPS_MODE = 0x0087, /* * Current transmit MCS * ----------------------------------------------------------- * Configuration : MCS Index for data rate * Values to set : 0 to 7 * ----------------------------------------------------------- */ WID_11N_CURRENT_TX_MCS = 0x0088, WID_11N_PRINT_STATS = 0x0089, /* * 11n Short GI Enable Flag * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_11N_SHORT_GI_ENABLE = 0x008D, /* * 11n RIFS Enable Flag * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_RIFS_MODE = 0x0094, /* * TX Abort Feature * ----------------------------------------------------------- * Configuration : Disable Self CTS Enable Self CTS * Values to set : 0 1 * Configuration : Disable TX Abort Enable TX Abort * Values to set : 2 3 * Configuration : Enable HW TX Abort Enable SW TX Abort * Values to set : 4 5 * ----------------------------------------------------------- */ WID_TX_ABORT_CONFIG = 0x00A1, WID_REG_TSSI_11B_VALUE = 0x00A6, WID_REG_TSSI_11G_VALUE = 0x00A7, WID_REG_TSSI_11N_VALUE = 0x00A8, WID_TX_CALIBRATION = 0x00A9, WID_DSCR_TSSI_11B_VALUE = 0x00AA, WID_DSCR_TSSI_11G_VALUE = 0x00AB, WID_DSCR_TSSI_11N_VALUE = 0x00AC, /* * Immediate Block-Ack Support * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF, /* * TXOP Disable Flag * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 1 0 * ----------------------------------------------------------- */ WID_11N_TXOP_PROT_DISABLE = 0x00B0, WID_TX_POWER_LEVEL_11N = 0x00B1, /* Custom Character WID list */ /* SCAN Complete notification WID*/ WID_SCAN_COMPLETE = 0x00C9, WID_DEL_BEACON = 0x00CA, WID_LOG_TERMINAL_SWITCH = 0x00CD, WID_TX_POWER = 0x00CE, WID_WOWLAN_TRIGGER = 0X00CF, WID_SET_MFP = 0x00D0, WID_DEFAULT_MGMT_KEY_ID = 0x00D2, /* EMAC Short WID list */ /* RTS Threshold */ /* * ----------------------------------------------------------- * Configuration : Any value between 256 to 2347 * Values to set : Same value. Default is 2347 * ----------------------------------------------------------- */ WID_RTS_THRESHOLD = 0x1000, /* * Fragmentation Threshold * ----------------------------------------------------------- * Configuration : Any value between 256 to 2346 * Values to set : Same value. Default is 2346 * ----------------------------------------------------------- */ WID_FRAG_THRESHOLD = 0x1001, WID_SHORT_RETRY_LIMIT = 0x1002, WID_LONG_RETRY_LIMIT = 0x1003, WID_BEACON_INTERVAL = 0x1006, WID_MEMORY_ACCESS_16BIT = 0x1008, WID_PASSIVE_SCAN_TIME = 0x100D, WID_JOIN_START_TIMEOUT = 0x100F, WID_ASOC_TIMEOUT = 0x1011, WID_11I_PROTOCOL_TIMEOUT = 0x1012, WID_EAPOL_RESPONSE_TIMEOUT = 0x1013, /* NMAC Short WID list */ WID_11N_SIG_QUAL_VAL = 0x1085, WID_CCA_THRESHOLD = 0x1087, /* Custom Short WID list */ /* EMAC Integer WID list */ WID_FAILED_COUNT = 0x2000, WID_RETRY_COUNT = 0x2001, WID_MULTIPLE_RETRY_COUNT = 0x2002, WID_FRAME_DUPLICATE_COUNT = 0x2003, WID_ACK_FAILURE_COUNT = 0x2004, WID_RECEIVED_FRAGMENT_COUNT = 0x2005, WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006, WID_FCS_ERROR_COUNT = 0x2007, WID_SUCCESS_FRAME_COUNT = 0x2008, WID_HUT_TX_COUNT = 0x200A, WID_TX_FRAGMENT_COUNT = 0x200B, WID_TX_MULTICAST_FRAME_COUNT = 0x200C, WID_RTS_SUCCESS_COUNT = 0x200D, WID_RTS_FAILURE_COUNT = 0x200E, WID_WEP_UNDECRYPTABLE_COUNT = 0x200F, WID_REKEY_PERIOD = 0x2010, WID_REKEY_PACKET_COUNT = 0x2011, WID_1X_SERV_ADDR = 0x2012, WID_STACK_IP_ADDR = 0x2013, WID_STACK_NETMASK_ADDR = 0x2014, WID_HW_RX_COUNT = 0x2015, WID_MEMORY_ADDRESS = 0x201E, WID_MEMORY_ACCESS_32BIT = 0x201F, /* NMAC Integer WID list */ /* Custom Integer WID list */ WID_GET_INACTIVE_TIME = 0x2084, /* EMAC String WID list */ WID_SSID = 0x3000, WID_FIRMWARE_VERSION = 0x3001, WID_OPERATIONAL_RATE_SET = 0x3002, WID_BSSID = 0x3003, WID_WEP_KEY_VALUE = 0x3004, WID_11I_PSK = 0x3008, WID_11E_P_ACTION_REQ = 0x3009, WID_1X_KEY = 0x300A, WID_HARDWARE_VERSION = 0x300B, WID_MAC_ADDR = 0x300C, WID_HUT_DEST_ADDR = 0x300D, WID_PHY_VERSION = 0x300F, WID_SUPP_USERNAME = 0x3010, WID_SUPP_PASSWORD = 0x3011, WID_SITE_SURVEY_RESULTS = 0x3012, WID_RX_POWER_LEVEL = 0x3013, WID_SET_STA_MAC_INACTIVE_TIME = 0x3017, WID_ADD_WEP_KEY = 0x3019, WID_REMOVE_WEP_KEY = 0x301A, WID_ADD_PTK = 0x301B, WID_ADD_RX_GTK = 0x301C, WID_ADD_TX_GTK = 0x301D, WID_REMOVE_KEY = 0x301E, WID_ASSOC_REQ_INFO = 0x301F, WID_ASSOC_RES_INFO = 0x3020, WID_ADD_IGTK = 0x3022, WID_MANUFACTURER = 0x3026, /* Added for CAPI tool */ WID_MODEL_NAME = 0x3027, /* Added for CAPI tool */ WID_MODEL_NUM = 0x3028, /* Added for CAPI tool */ WID_DEVICE_NAME = 0x3029, /* Added for CAPI tool */ /* NMAC String WID list */ WID_SET_OPERATION_MODE = 0x3079, WID_11N_P_ACTION_REQ = 0x3080, WID_HUT_TEST_ID = 0x3081, WID_PMKID_INFO = 0x3082, WID_FIRMWARE_INFO = 0x3083, WID_REGISTER_FRAME = 0x3084, WID_DEL_ALL_STA = 0x3085, WID_REMAIN_ON_CHAN = 0x3996, WID_SSID_PROBE_REQ = 0x3997, WID_JOIN_REQ_EXTENDED = 0x3998, WID_IP_ADDRESS = 0x3999, /* Custom String WID list */ /* EMAC Binary WID list */ WID_UAPSD_CONFIG = 0x4001, WID_UAPSD_STATUS = 0x4002, WID_WMM_AP_AC_PARAMS = 0x4003, WID_WMM_STA_AC_PARAMS = 0x4004, WID_NETWORK_INFO = 0x4005, WID_STA_JOIN_INFO = 0x4006, WID_CONNECTED_STA_LIST = 0x4007, /* NMAC Binary WID list */ WID_11N_AUTORATE_TABLE = 0x4080, WID_SCAN_CHANNEL_LIST = 0x4084, WID_INFO_ELEMENT_PROBE = 0x4085, WID_INFO_ELEMENT_ASSOCIATE = 0x4086, WID_ADD_STA = 0X4087, WID_REMOVE_STA = 0X4088, WID_EDIT_STA = 0X4089, WID_ADD_BEACON = 0x408a, WID_SETUP_MULTICAST_FILTER = 0x408b, WID_EXTERNAL_AUTH_PARAM = 0x408d, /* Miscellaneous WIDs */ WID_ALL = 0x7FFE, WID_MAX = 0xFFFF }; #endif