#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#define NEX10000UB_REG_VPOS 0x00
#define NEX10000UB_REG_VNEG 0x01
#define NEX10000UB_REG_ID 0x02
#define NEX10000UB_VOUT_MASK 0x1F
#define NEX10000UB_VOUT_N_VOLTAGE 0x15
#define NEX10000UB_VOUT_VMIN 4000000
#define NEX10000UB_VOUT_VMAX 6000000
#define NEX10000UB_VOUT_STEP 100000
#define NEX10000UB_REGULATOR_ID_VPOS 0
#define NEX10000UB_REGULATOR_ID_VNEG 1
#define NEX10000UB_MAX_REGULATORS 2
static const struct regulator_ops nex10000ub_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
};
static int nex10000ub_of_parse_cb(struct device_node *np,
const struct regulator_desc *desc,
struct regulator_config *config)
{
struct gpio_desc *ena_gpiod;
ena_gpiod = fwnode_gpiod_get_index(of_fwnode_handle(np), "enable", 0,
GPIOD_OUT_LOW, desc->name);
if (IS_ERR(ena_gpiod))
return PTR_ERR(ena_gpiod);
config->ena_gpiod = ena_gpiod;
return 0;
}
#define NEX10000UB_REGULATOR_DESC(_id, _name) \
[NEX10000UB_REGULATOR_ID_##_id] = { \
.name = "nex10000ub-"#_name, \
.supply_name = "vin", \
.id = NEX10000UB_REGULATOR_ID_##_id, \
.of_match = of_match_ptr(#_name), \
.of_parse_cb = nex10000ub_of_parse_cb, \
.ops = &nex10000ub_regulator_ops, \
.n_voltages = NEX10000UB_VOUT_N_VOLTAGE, \
.min_uV = NEX10000UB_VOUT_VMIN, \
.uV_step = NEX10000UB_VOUT_STEP, \
.enable_time = 2000, \
.vsel_mask = NEX10000UB_VOUT_MASK, \
.vsel_reg = NEX10000UB_REG_##_id, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
}
static const struct regulator_desc nex10000_regs_desc[NEX10000UB_MAX_REGULATORS] = {
NEX10000UB_REGULATOR_DESC(VPOS, vpos),
NEX10000UB_REGULATOR_DESC(VNEG, vneg),
};
static const struct regmap_config nex10000ub_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = NEX10000UB_REG_ID,
.cache_type = REGCACHE_NONE,
};
static int nex10000ub_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct regmap *map;
int id;
int ret;
map = devm_regmap_init_i2c(client, &nex10000ub_regmap_config);
if (IS_ERR(map)) {
ret = PTR_ERR(map);
dev_err(dev, "regmap init failed: %d\n", ret);
return ret;
}
for (id = 0; id < NEX10000UB_MAX_REGULATORS; ++id) {
struct regulator_config config = { };
struct regulator_dev *rdev;
config.regmap = map;
config.dev = dev;
rdev = devm_regulator_register(dev, &nex10000_regs_desc[id],
&config);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(dev, "regulator %s register failed: %d\n",
nex10000_regs_desc[id].name, ret);
return ret;
}
}
return 0;
}
static const struct i2c_device_id nex10000ub_id[] = {
{ .name = "nex10000ub" },
{ }
};
MODULE_DEVICE_TABLE(i2c, nex10000ub_id);
static const struct of_device_id __maybe_unused nex10000ub_of_match[] = {
{ .compatible = "nexperia,nex10000ub" },
{},
};
MODULE_DEVICE_TABLE(of, nex10000ub_of_match);
static struct i2c_driver nex10000ub_i2c_driver = {
.driver = {
.name = "nex10000ub",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(nex10000ub_of_match),
},
.probe = nex10000ub_probe,
.id_table = nex10000ub_id,
};
module_i2c_driver(nex10000ub_i2c_driver);
MODULE_DESCRIPTION("NEX10000UB regulator driver");
MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>");
MODULE_LICENSE("GPL"