// SPDX-License-Identifier: GPL-2.0-only /* * Atmel SMC (Static Memory Controller) helper functions. * * Copyright (C) 2017 Atmel * Copyright (C) 2017 Free Electrons * * Author: Boris Brezillon <boris.brezillon@free-electrons.com> */ #include <linux/mfd/syscon/atmel-smc.h> #include <linux/string.h> /** * atmel_smc_cs_conf_init - initialize a SMC CS conf * @conf: the SMC CS conf to initialize * * Set all fields to 0 so that one can start defining a new config. */ void atmel_smc_cs_conf_init(struct atmel_smc_cs_conf *conf) { memset(conf, 0, sizeof(*conf)); } EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_init); /** * atmel_smc_cs_encode_ncycles - encode a number of MCK clk cycles in the * format expected by the SMC engine * @ncycles: number of MCK clk cycles * @msbpos: position of the MSB part of the timing field * @msbwidth: width of the MSB part of the timing field * @msbfactor: factor applied to the MSB * @encodedval: param used to store the encoding result * * This function encodes the @ncycles value as described in the datasheet * (section "SMC Setup/Pulse/Cycle/Timings Register"). This is a generic * helper which called with different parameter depending on the encoding * scheme. * * If the @ncycles value is too big to be encoded, -ERANGE is returned and * the encodedval is contains the maximum val. Otherwise, 0 is returned. */ static int atmel_smc_cs_encode_ncycles(unsigned int ncycles, unsigned int msbpos, unsigned int msbwidth, unsigned int msbfactor, unsigned int *encodedval) { unsigned int lsbmask = GENMASK(msbpos - 1, 0); unsigned int msbmask = GENMASK(msbwidth - 1, 0); unsigned int msb, lsb; int ret = 0; msb = ncycles / msbfactor; lsb = ncycles % msbfactor; if (lsb > lsbmask) { lsb = 0; msb++; } /* * Let's just put the maximum we can if the requested setting does * not fit in the register field. * We still return -ERANGE in case the caller cares. */ if (msb > msbmask) { msb = msbmask; lsb = lsbmask; ret = -ERANGE; } *encodedval = (msb << msbpos) | lsb; return ret; } /** * atmel_smc_cs_conf_set_timing - set the SMC CS conf Txx parameter to a * specific value * @conf: SMC CS conf descriptor * @shift: the position of the Txx field in the TIMINGS register * @ncycles: value (expressed in MCK clk cycles) to assign to this Txx * parameter * * This function encodes the @ncycles value as described in the datasheet * (section "SMC Timings Register"), and then stores the result in the * @conf->timings field at @shift position. * * Returns -EINVAL if shift is invalid, -ERANGE if ncycles does not fit in * the field, and 0 otherwise. */ int atmel_smc_cs_conf_set_timing(struct atmel_smc_cs_conf *conf, unsigned int shift, unsigned int ncycles) { unsigned int val; int ret; if (shift != ATMEL_HSMC_TIMINGS_TCLR_SHIFT && shift != ATMEL_HSMC_TIMINGS_TADL_SHIFT && shift != ATMEL_HSMC_TIMINGS_TAR_SHIFT && shift != ATMEL_HSMC_TIMINGS_TRR_SHIFT && shift != ATMEL_HSMC_TIMINGS_TWB_SHIFT) return -EINVAL; /* * The formula described in atmel datasheets (section "HSMC Timings * Register"): * * ncycles = (Txx[3] * 64) + Txx[2:0] */ ret = atmel_smc_cs_encode_ncycles(ncycles, 3, 1, 64, &val); conf->timings &= ~GENMASK(shift + 3, shift); conf->timings |= val << shift; return ret; } EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_timing); /** * atmel_smc_cs_conf_set_setup - set the SMC CS conf xx_SETUP parameter to a * specific value * @conf: SMC CS conf descriptor * @shift: the position of the xx_SETUP field in the SETUP register * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_SETUP * parameter * * This function encodes the @ncycles value as described in the datasheet * (section "SMC Setup Register"), and then stores the result in the * @conf->setup field at @shift position. * * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in * the field, and 0 otherwise. */ int atmel_smc_cs_conf_set_setup(struct atmel_smc_cs_conf *conf, unsigned int shift, unsigned int ncycles) { unsigned int val; int ret; if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT && shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT) return -EINVAL; /* * The formula described in atmel datasheets (section "SMC Setup * Register"): * * ncycles = (128 * xx_SETUP[5]) + xx_SETUP[4:0] */ ret = atmel_smc_cs_encode_ncycles(ncycles, 5, 1, 128, &val); conf->setup &= ~GENMASK(shift + 7, shift); conf->setup |= val << shift; return ret; } EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_setup); /** * atmel_smc_cs_conf_set_pulse - set the SMC CS conf xx_PULSE parameter to a * specific value * @conf: SMC CS conf descriptor * @shift: the position of the xx_PULSE field in the PULSE register * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_PULSE * parameter * * This function encodes the @ncycles value as described in the datasheet * (section "SMC Pulse Register"), and then stores the result in the * @conf->setup field at @shift position. * * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in * the field, and 0 otherwise. */ int atmel_smc_cs_conf_set_pulse(struct atmel_smc_cs_conf *conf, unsigned int shift, unsigned int ncycles) { unsigned int val; int ret; if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT && shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT) return -EINVAL; /* * The formula described in atmel datasheets (section "SMC Pulse * Register"): * * ncycles = (256 * xx_PULSE[6]) + xx_PULSE[5:0] */ ret = atmel_smc_cs_encode_ncycles(ncycles, 6, 1, 256, &val); conf->pulse &= ~GENMASK(shift + 7, shift); conf->pulse |= val << shift; return ret; } EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_pulse); /** * atmel_smc_cs_conf_set_cycle - set the SMC CS conf xx_CYCLE parameter to a * specific value * @conf: SMC CS conf descriptor * @shift: the position of the xx_CYCLE field in the CYCLE register * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_CYCLE * parameter * * This function encodes the @ncycles value as described in the datasheet * (section "SMC Cycle Register"), and then stores the result in the * @conf->setup field at @shift position. * * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in * the field, and 0 otherwise. */ int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf, unsigned int shift, unsigned int ncycles) { unsigned int val; int ret; if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NRD_SHIFT) return -EINVAL; /* * The formula described in atmel datasheets (section "SMC Cycle * Register"): * * ncycles = (xx_CYCLE[8:7] * 256) + xx_CYCLE[6:0] */ ret = atmel_smc_cs_encode_ncycles(ncycles, 7, 2, 256, &val); conf->cycle &= ~GENMASK(shift + 15, shift); conf->cycle |= val << shift; return ret; } EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_cycle); /** * atmel_smc_cs_conf_apply - apply an SMC CS conf * @regmap: the SMC regmap * @cs: the CS id * @conf: the SMC CS conf to apply * * Applies an SMC CS configuration. * Only valid on at91sam9 SoCs. */ void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs, const struct atmel_smc_cs_conf *conf) { regmap_write(regmap, ATMEL_SMC_SETUP(cs), conf->setup); regmap_write(regmap, ATMEL_SMC_PULSE(cs), conf->pulse); regmap_write(regmap, ATMEL_SMC_CYCLE(cs), conf->cycle); regmap_write(regmap, ATMEL_SMC_MODE(cs), conf->mode); } EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply); /** * atmel_hsmc_cs_conf_apply - apply an SMC CS conf * @regmap: the HSMC regmap * @cs: the CS id * @layout: the layout of registers * @conf: the SMC CS conf to apply * * Applies an SMC CS configuration. * Only valid on post-sama5 SoCs. */ void atmel_hsmc_cs_conf_apply(struct regmap *regmap, const struct atmel_hsmc_reg_layout *layout, int cs, const struct atmel_smc_cs_conf *conf) { regmap_write(regmap, ATMEL_HSMC_SETUP(layout, cs), conf->setup); regmap_write(regmap, ATMEL_HSMC_PULSE(layout, cs), conf->pulse); regmap_write(regmap, ATMEL_HSMC_CYCLE(layout, cs), conf->cycle); regmap_write(regmap, ATMEL_HSMC_TIMINGS(layout, cs), conf->timings); regmap_write(regmap, ATMEL_HSMC_MODE(layout, cs), conf->mode); } EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply); /** * atmel_smc_cs_conf_get - retrieve the current SMC CS conf * @regmap: the SMC regmap * @cs: the CS id * @conf: the SMC CS conf object to store the current conf * * Retrieve the SMC CS configuration. * Only valid on at91sam9 SoCs. */ void atmel_smc_cs_conf_get(struct regmap *regmap, int cs, struct atmel_smc_cs_conf *conf) { regmap_read(regmap, ATMEL_SMC_SETUP(cs), &conf->setup); regmap_read(regmap, ATMEL_SMC_PULSE(cs), &conf->pulse); regmap_read(regmap, ATMEL_SMC_CYCLE(cs), &conf->cycle); regmap_read(regmap, ATMEL_SMC_MODE(cs), &conf->mode); } EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get); /** * atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf * @regmap: the HSMC regmap * @cs: the CS id * @layout: the layout of registers * @conf: the SMC CS conf object to store the current conf * * Retrieve the SMC CS configuration. * Only valid on post-sama5 SoCs. */ void atmel_hsmc_cs_conf_get(struct regmap *regmap, const struct atmel_hsmc_reg_layout *layout, int cs, struct atmel_smc_cs_conf *conf) { regmap_read(regmap, ATMEL_HSMC_SETUP(layout, cs), &conf->setup); regmap_read(regmap, ATMEL_HSMC_PULSE(layout, cs), &conf->pulse); regmap_read(regmap, ATMEL_HSMC_CYCLE(layout, cs), &conf->cycle); regmap_read(regmap, ATMEL_HSMC_TIMINGS(layout, cs), &conf->timings); regmap_read(regmap, ATMEL_HSMC_MODE(layout, cs), &conf->mode); } EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_get); static const struct atmel_hsmc_reg_layout sama5d3_reg_layout = { .timing_regs_offset = 0x600, }; static const struct atmel_hsmc_reg_layout sama5d2_reg_layout = { .timing_regs_offset = 0x700, }; static const struct of_device_id atmel_smc_ids[] __maybe_unused = { { .compatible = "atmel,at91sam9260-smc", .data = NULL }, { .compatible = "atmel,sama5d3-smc", .data = &sama5d3_reg_layout }, { .compatible = "atmel,sama5d2-smc", .data = &sama5d2_reg_layout }, { /* sentinel */ }, }; /** * atmel_hsmc_get_reg_layout - retrieve the layout of HSMC registers * @np: the HSMC regmap * * Retrieve the layout of HSMC registers. * * Returns NULL in case of SMC, a struct atmel_hsmc_reg_layout pointer * in HSMC case, otherwise ERR_PTR(-EINVAL). */ const struct atmel_hsmc_reg_layout * atmel_hsmc_get_reg_layout(struct device_node *np) { const struct of_device_id *match; match = of_match_node(atmel_smc_ids, np); return match ? match->data : ERR_PTR(-EINVAL); } EXPORT_SYMBOL_GPL