/* SPDX-License-Identifier: MIT */ /****************************************************************************** * xen.h * * Guest OS interface to Xen. * * Copyright (c) 2004, K A Fraser */ #ifndef __XEN_PUBLIC_XEN_H__ #define __XEN_PUBLIC_XEN_H__ #include <asm/xen/interface.h> /* * XEN "SYSTEM CALLS" (a.k.a. HYPERCALLS). */ /* * x86_32: EAX = vector; EBX, ECX, EDX, ESI, EDI = args 1, 2, 3, 4, 5. * EAX = return value * (argument registers may be clobbered on return) * x86_64: RAX = vector; RDI, RSI, RDX, R10, R8, R9 = args 1, 2, 3, 4, 5, 6. * RAX = return value * (argument registers not clobbered on return; RCX, R11 are) */ #define __HYPERVISOR_set_trap_table 0 #define __HYPERVISOR_mmu_update 1 #define __HYPERVISOR_set_gdt 2 #define __HYPERVISOR_stack_switch 3 #define __HYPERVISOR_set_callbacks 4 #define __HYPERVISOR_fpu_taskswitch 5 #define __HYPERVISOR_sched_op_compat 6 #define __HYPERVISOR_platform_op 7 #define __HYPERVISOR_set_debugreg 8 #define __HYPERVISOR_get_debugreg 9 #define __HYPERVISOR_update_descriptor 10 #define __HYPERVISOR_memory_op 12 #define __HYPERVISOR_multicall 13 #define __HYPERVISOR_update_va_mapping 14 #define __HYPERVISOR_set_timer_op 15 #define __HYPERVISOR_event_channel_op_compat 16 #define __HYPERVISOR_xen_version 17 #define __HYPERVISOR_console_io 18 #define __HYPERVISOR_physdev_op_compat 19 #define __HYPERVISOR_grant_table_op 20 #define __HYPERVISOR_vm_assist 21 #define __HYPERVISOR_update_va_mapping_otherdomain 22 #define __HYPERVISOR_iret 23 /* x86 only */ #define __HYPERVISOR_vcpu_op 24 #define __HYPERVISOR_set_segment_base 25 /* x86/64 only */ #define __HYPERVISOR_mmuext_op 26 #define __HYPERVISOR_xsm_op 27 #define __HYPERVISOR_nmi_op 28 #define __HYPERVISOR_sched_op 29 #define __HYPERVISOR_callback_op 30 #define __HYPERVISOR_xenoprof_op 31 #define __HYPERVISOR_event_channel_op 32 #define __HYPERVISOR_physdev_op 33 #define __HYPERVISOR_hvm_op 34 #define __HYPERVISOR_sysctl 35 #define __HYPERVISOR_domctl 36 #define __HYPERVISOR_kexec_op 37 #define __HYPERVISOR_tmem_op 38 #define __HYPERVISOR_xc_reserved_op 39 /* reserved for XenClient */ #define __HYPERVISOR_xenpmu_op 40 #define __HYPERVISOR_dm_op 41 /* Architecture-specific hypercall definitions. */ #define __HYPERVISOR_arch_0 48 #define __HYPERVISOR_arch_1 49 #define __HYPERVISOR_arch_2 50 #define __HYPERVISOR_arch_3 51 #define __HYPERVISOR_arch_4 52 #define __HYPERVISOR_arch_5 53 #define __HYPERVISOR_arch_6 54 #define __HYPERVISOR_arch_7 55 /* * VIRTUAL INTERRUPTS * * Virtual interrupts that a guest OS may receive from Xen. * In the side comments, 'V.' denotes a per-VCPU VIRQ while 'G.' denotes a * global VIRQ. The former can be bound once per VCPU and cannot be re-bound. * The latter can be allocated only once per guest: they must initially be * allocated to VCPU0 but can subsequently be re-bound. */ #define VIRQ_TIMER 0 /* V. Timebase update, and/or requested timeout. */ #define VIRQ_DEBUG 1 /* V. Request guest to dump debug info. */ #define VIRQ_CONSOLE 2 /* G. (DOM0) Bytes received on emergency console. */ #define VIRQ_DOM_EXC 3 /* G. (DOM0) Exceptional event for some domain. */ #define VIRQ_TBUF 4 /* G. (DOM0) Trace buffer has records available. */ #define VIRQ_DEBUGGER 6 /* G. (DOM0) A domain has paused for debugging. */ #define VIRQ_XENOPROF 7 /* V. XenOprofile interrupt: new sample available */ #define VIRQ_CON_RING 8 /* G. (DOM0) Bytes received on console */ #define VIRQ_PCPU_STATE 9 /* G. (DOM0) PCPU state changed */ #define VIRQ_MEM_EVENT 10 /* G. (DOM0) A memory event has occured */ #define VIRQ_XC_RESERVED 11 /* G. Reserved for XenClient */ #define VIRQ_ENOMEM 12 /* G. (DOM0) Low on heap memory */ #define VIRQ_XENPMU 13 /* PMC interrupt */ /* Architecture-specific VIRQ definitions. */ #define VIRQ_ARCH_0 16 #define VIRQ_ARCH_1 17 #define VIRQ_ARCH_2 18 #define VIRQ_ARCH_3 19 #define VIRQ_ARCH_4 20 #define VIRQ_ARCH_5 21 #define VIRQ_ARCH_6 22 #define VIRQ_ARCH_7 23 #define NR_VIRQS 24 /* * enum neg_errnoval HYPERVISOR_mmu_update(const struct mmu_update reqs[], * unsigned count, unsigned *done_out, * unsigned foreigndom) * @reqs is an array of mmu_update_t structures ((ptr, val) pairs). * @count is the length of the above array. * @pdone is an output parameter indicating number of completed operations * @foreigndom[15:0]: FD, the expected owner of data pages referenced in this * hypercall invocation. Can be DOMID_SELF. * @foreigndom[31:16]: PFD, the expected owner of pagetable pages referenced * in this hypercall invocation. The value of this field * (x) encodes the PFD as follows: * x == 0 => PFD == DOMID_SELF * x != 0 => PFD == x - 1 * * Sub-commands: ptr[1:0] specifies the appropriate MMU_* command. * ------------- * ptr[1:0] == MMU_NORMAL_PT_UPDATE: * Updates an entry in a page table belonging to PFD. If updating an L1 table, * and the new table entry is valid/present, the mapped frame must belong to * FD. If attempting to map an I/O page then the caller assumes the privilege * of the FD. * FD == DOMID_IO: Permit /only/ I/O mappings, at the priv level of the caller. * FD == DOMID_XEN: Map restricted areas of Xen's heap space. * ptr[:2] -- Machine address of the page-table entry to modify. * val -- Value to write. * * There also certain implicit requirements when using this hypercall. The * pages that make up a pagetable must be mapped read-only in the guest. * This prevents uncontrolled guest updates to the pagetable. Xen strictly * enforces this, and will disallow any pagetable update which will end up * mapping pagetable page RW, and will disallow using any writable page as a * pagetable. In practice it means that when constructing a page table for a * process, thread, etc, we MUST be very dilligient in following these rules: * 1). Start with top-level page (PGD or in Xen language: L4). Fill out * the entries. * 2). Keep on going, filling out the upper (PUD or L3), and middle (PMD * or L2). * 3). Start filling out the PTE table (L1) with the PTE entries. Once * done, make sure to set each of those entries to RO (so writeable bit * is unset). Once that has been completed, set the PMD (L2) for this * PTE table as RO. * 4). When completed with all of the PMD (L2) entries, and all of them have * been set to RO, make sure to set RO the PUD (L3). Do the same * operation on PGD (L4) pagetable entries that have a PUD (L3) entry. * 5). Now before you can use those pages (so setting the cr3), you MUST also * pin them so that the hypervisor can verify the entries. This is done * via the HYPERVISOR_mmuext_op(MMUEXT_PIN_L4_TABLE, guest physical frame * number of the PGD (L4)). And this point the HYPERVISOR_mmuext_op( * MMUEXT_NEW_BASEPTR, guest physical frame number of the PGD (L4)) can be * issued. * For 32-bit guests, the L4 is not used (as there is less pagetables), so * instead use L3. * At this point the pagetables can be modified using the MMU_NORMAL_PT_UPDATE * hypercall. Also if so desired the OS can also try to write to the PTE * and be trapped by the hypervisor (as the PTE entry is RO). * * To deallocate the pages, the operations are the reverse of the steps * mentioned above. The argument is MMUEXT_UNPIN_TABLE for all levels and the * pagetable MUST not be in use (meaning that the cr3 is not set to it). * * ptr[1:0] == MMU_MACHPHYS_UPDATE: * Updates an entry in the machine->pseudo-physical mapping table. * ptr[:2] -- Machine address within the frame whose mapping to modify. * The frame must belong to the FD, if one is specified. * val -- Value to write into the mapping entry. * * ptr[1:0] == MMU_PT_UPDATE_PRESERVE_AD: * As MMU_NORMAL_PT_UPDATE above, but A/D bits currently in the PTE are ORed * with those in @val. * * @val is usually the machine frame number along with some attributes. * The attributes by default follow the architecture defined bits. Meaning that * if this is a X86_64 machine and four page table layout is used, the layout * of val is: * - 63 if set means No execute (NX) * - 46-13 the machine frame number * - 12 available for guest * - 11 available for guest * - 10 available for guest * - 9 available for guest * - 8 global * - 7 PAT (PSE is disabled, must use hypercall to make 4MB or 2MB pages) * - 6 dirty * - 5 accessed * - 4 page cached disabled * - 3 page write through * - 2 userspace accessible * - 1 writeable * - 0 present * * The one bits that does not fit with the default layout is the PAGE_PSE * also called PAGE_PAT). The MMUEXT_[UN]MARK_SUPER arguments to the * HYPERVISOR_mmuext_op serve as mechanism to set a pagetable to be 4MB * (or 2MB) instead of using the PAGE_PSE bit. * * The reason that the PAGE_PSE (bit 7) is not being utilized is due to Xen * using it as the Page Attribute Table (PAT) bit - for details on it please * refer to Intel SDM 10.12. The PAT allows to set the caching attributes of * pages instead of using MTRRs. * * The PAT MSR is as follows (it is a 64-bit value, each entry is 8 bits): * PAT4 PAT0 * +-----+-----+----+----+----+-----+----+----+ * | UC | UC- | WC | WB | UC | UC- | WC | WB | <= Linux * +-----+-----+----+----+----+-----+----+----+ * | UC | UC- | WT | WB | UC | UC- | WT | WB | <= BIOS (default when machine boots) * +-----+-----+----+----+----+-----+----+----+ * | rsv | rsv | WP | WC | UC | UC- | WT | WB | <= Xen * +-----+-----+----+----+----+-----+----+----+ * * The lookup of this index table translates to looking up * Bit 7, Bit 4, and Bit 3 of val entry: * * PAT/PSE (bit 7) ... PCD (bit 4) .. PWT (bit 3). * * If all bits are off, then we are using PAT0. If bit 3 turned on, * then we are using PAT1, if bit 3 and bit 4, then PAT2.. * * As you can see, the Linux PAT1 translates to PAT4 under Xen. Which means * that if a guest that follows Linux's PAT setup and would like to set Write * Combined on pages it MUST use PAT4 entry. Meaning that Bit 7 (PAGE_PAT) is * set. For example, under Linux it only uses PAT0, PAT1, and PAT2 for the * caching as: * * WB = none (so PAT0) * WC = PWT (bit 3 on) * UC = PWT | PCD (bit 3 and 4 are on). * * To make it work with Xen, it needs to translate the WC bit as so: * * PWT (so bit 3 on) --> PAT (so bit 7 is on) and clear bit 3 * * And to translate back it would: * * PAT (bit 7 on) --> PWT (bit 3 on) and clear bit 7. */ #define MMU_NORMAL_PT_UPDATE 0 /* checked '*ptr = val'. ptr is MA. */ #define MMU_MACHPHYS_UPDATE 1 /* ptr = MA of frame to modify entry for */ #define MMU_PT_UPDATE_PRESERVE_AD 2 /* atomically: *ptr = val | (*ptr&(A|D)) */ #define MMU_PT_UPDATE_NO_TRANSLATE 3 /* checked '*ptr = val'. ptr is MA. */ /* * MMU EXTENDED OPERATIONS * * enum neg_errnoval HYPERVISOR_mmuext_op(mmuext_op_t uops[], * unsigned int count, * unsigned int *pdone, * unsigned int foreigndom) */ /* HYPERVISOR_mmuext_op() accepts a list of mmuext_op structures. * A foreigndom (FD) can be specified (or DOMID_SELF for none). * Where the FD has some effect, it is described below. * * cmd: MMUEXT_(UN)PIN_*_TABLE * mfn: Machine frame number to be (un)pinned as a p.t. page. * The frame must belong to the FD, if one is specified. * * cmd: MMUEXT_NEW_BASEPTR * mfn: Machine frame number of new page-table base to install in MMU. * * cmd: MMUEXT_NEW_USER_BASEPTR [x86/64 only] * mfn: Machine frame number of new page-table base to install in MMU * when in user space. * * cmd: MMUEXT_TLB_FLUSH_LOCAL * No additional arguments. Flushes local TLB. * * cmd: MMUEXT_INVLPG_LOCAL * linear_addr: Linear address to be flushed from the local TLB. * * cmd: MMUEXT_TLB_FLUSH_MULTI * vcpumask: Pointer to bitmap of VCPUs to be flushed. * * cmd: MMUEXT_INVLPG_MULTI * linear_addr: Linear address to be flushed. * vcpumask: Pointer to bitmap of VCPUs to be flushed. * * cmd: MMUEXT_TLB_FLUSH_ALL * No additional arguments. Flushes all VCPUs' TLBs. * * cmd: MMUEXT_INVLPG_ALL * linear_addr: Linear address to be flushed from all VCPUs' TLBs. * * cmd: MMUEXT_FLUSH_CACHE * No additional arguments. Writes back and flushes cache contents. * * cmd: MMUEXT_FLUSH_CACHE_GLOBAL * No additional arguments. Writes back and flushes cache contents * on all CPUs in the system. * * cmd: MMUEXT_SET_LDT * linear_addr: Linear address of LDT base (NB. must be page-aligned). * nr_ents: Number of entries in LDT. * * cmd: MMUEXT_CLEAR_PAGE * mfn: Machine frame number to be cleared. * * cmd: MMUEXT_COPY_PAGE * mfn: Machine frame number of the destination page. * src_mfn: Machine frame number of the source page. * * cmd: MMUEXT_[UN]MARK_SUPER * mfn: Machine frame number of head of superpage to be [un]marked. */ #define MMUEXT_PIN_L1_TABLE 0 #define MMUEXT_PIN_L2_TABLE 1 #define MMUEXT_PIN_L3_TABLE 2 #define MMUEXT_PIN_L4_TABLE 3 #define MMUEXT_UNPIN_TABLE 4 #define MMUEXT_NEW_BASEPTR 5 #define MMUEXT_TLB_FLUSH_LOCAL 6 #define MMUEXT_INVLPG_LOCAL 7 #define MMUEXT_TLB_FLUSH_MULTI 8 #define MMUEXT_INVLPG_MULTI 9 #define MMUEXT_TLB_FLUSH_ALL 10 #define MMUEXT_INVLPG_ALL 11 #define MMUEXT_FLUSH_CACHE 12 #define MMUEXT_SET_LDT 13 #define MMUEXT_NEW_USER_BASEPTR 15 #define MMUEXT_CLEAR_PAGE 16 #define MMUEXT_COPY_PAGE 17 #define MMUEXT_FLUSH_CACHE_GLOBAL 18 #define MMUEXT_MARK_SUPER 19 #define MMUEXT_UNMARK_SUPER 20 #ifndef __ASSEMBLY__ struct mmuext_op { unsigned int cmd; union { /* [UN]PIN_TABLE, NEW_BASEPTR, NEW_USER_BASEPTR * CLEAR_PAGE, COPY_PAGE, [UN]MARK_SUPER */ xen_pfn_t mfn; /* INVLPG_LOCAL, INVLPG_ALL, SET_LDT */ unsigned long linear_addr; } arg1; union { /* SET_LDT */ unsigned int nr_ents; /* TLB_FLUSH_MULTI, INVLPG_MULTI */ void *vcpumask; /* COPY_PAGE */ xen_pfn_t src_mfn; } arg2; }; DEFINE_GUEST_HANDLE_STRUCT(mmuext_op); #endif /* These are passed as 'flags' to update_va_mapping. They can be ORed. */ /* When specifying UVMF_MULTI, also OR in a pointer to a CPU bitmap. */ /* UVMF_LOCAL is merely UVMF_MULTI with a NULL bitmap pointer. */ #define UVMF_NONE (0UL<<0) /* No flushing at all. */ #define UVMF_TLB_FLUSH (1UL<<0) /* Flush entire TLB(s). */ #define UVMF_INVLPG (2UL<<0) /* Flush only one entry. */ #define UVMF_FLUSHTYPE_MASK (3UL<<0) #define UVMF_MULTI (0UL<<2) /* Flush subset of TLBs. */ #define UVMF_LOCAL (0UL<<2) /* Flush local TLB. */ #define UVMF_ALL (1UL<<2) /* Flush all TLBs. */ /* * Commands to HYPERVISOR_console_io(). */ #define CONSOLEIO_write 0 #define CONSOLEIO_read 1 /* * Commands to HYPERVISOR_vm_assist(). */ #define VMASST_CMD_enable 0 #define VMASST_CMD_disable 1 /* x86/32 guests: simulate full 4GB segment limits. */ #define VMASST_TYPE_4gb_segments 0 /* x86/32 guests: trap (vector 15) whenever above vmassist is used. */ #define VMASST_TYPE_4gb_segments_notify 1 /* * x86 guests: support writes to bottom-level PTEs. * NB1. Page-directory entries cannot be written. * NB2. Guest must continue to remove all writable mappings of PTEs. */ #define VMASST_TYPE_writable_pagetables 2 /* x86/PAE guests: support PDPTs above 4GB. */ #define VMASST_TYPE_pae_extended_cr3 3 /* * x86 guests: Sane behaviour for virtual iopl * - virtual iopl updated from do_iret() hypercalls. * - virtual iopl reported in bounce frames. * - guest kernels assumed to be level 0 for the purpose of iopl checks. */ #define VMASST_TYPE_architectural_iopl 4 /* * All guests: activate update indicator in vcpu_runstate_info * Enable setting the XEN_RUNSTATE_UPDATE flag in guest memory mapped * vcpu_runstate_info during updates of the runstate information. */ #define VMASST_TYPE_runstate_update_flag 5 #define MAX_VMASST_TYPE 5 #ifndef __ASSEMBLY__ typedef uint16_t domid_t; /* Domain ids >= DOMID_FIRST_RESERVED cannot be used for ordinary domains. */ #define DOMID_FIRST_RESERVED (0x7FF0U) /* DOMID_SELF is used in certain contexts to refer to oneself. */ #define DOMID_SELF (0x7FF0U) /* * DOMID_IO is used to restrict page-table updates to mapping I/O memory. * Although no Foreign Domain need be specified to map I/O pages, DOMID_IO * is useful to ensure that no mappings to the OS's own heap are accidentally * installed. (e.g., in Linux this could cause havoc as reference counts * aren't adjusted on the I/O-mapping code path). * This only makes sense in MMUEXT_SET_FOREIGNDOM, but in that context can * be specified by any calling domain. */ #define DOMID_IO (0x7FF1U) /* * DOMID_XEN is used to allow privileged domains to map restricted parts of * Xen's heap space (e.g., the machine_to_phys table). * This only makes sense in MMUEXT_SET_FOREIGNDOM, and is only permitted if * the caller is privileged. */ #define DOMID_XEN (0x7FF2U) /* DOMID_COW is used as the owner of sharable pages */ #define DOMID_COW (0x7FF3U) /* DOMID_INVALID is used to identify pages with unknown owner. */ #define DOMID_INVALID (0x7FF4U) /* Idle domain. */ #define DOMID_IDLE (0x7FFFU) /* * Send an array of these to HYPERVISOR_mmu_update(). * NB. The fields are natural pointer/address size for this architecture. */ struct mmu_update { uint64_t ptr; /* Machine address of PTE. */ uint64_t val; /* New contents of PTE. */ }; DEFINE_GUEST_HANDLE_STRUCT(mmu_update); /* * Send an array of these to HYPERVISOR_multicall(). * NB. The fields are logically the natural register size for this * architecture. In cases where xen_ulong_t is larger than this then * any unused bits in the upper portion must be zero. */ struct multicall_entry { xen_ulong_t op; xen_long_t result; xen_ulong_t args[6]; }; DEFINE_GUEST_HANDLE_STRUCT(multicall_entry); struct vcpu_time_info { /* * Updates to the following values are preceded and followed * by an increment of 'version'. The guest can therefore * detect updates by looking for changes to 'version'. If the * least-significant bit of the version number is set then an * update is in progress and the guest must wait to read a * consistent set of values. The correct way to interact with * the version number is similar to Linux's seqlock: see the * implementations of read_seqbegin/read_seqretry. */ uint32_t version; uint32_t pad0; uint64_t tsc_timestamp; /* TSC at last update of time vals. */ uint64_t system_time; /* Time, in nanosecs, since boot. */ /* * Current system time: * system_time + ((tsc - tsc_timestamp) << tsc_shift) * tsc_to_system_mul * CPU frequency (Hz): * ((10^9 << 32) / tsc_to_system_mul) >> tsc_shift */ uint32_t tsc_to_system_mul; int8_t tsc_shift; int8_t pad1[3]; }; /* 32 bytes */ struct vcpu_info { /* * 'evtchn_upcall_pending' is written non-zero by Xen to indicate * a pending notification for a particular VCPU. It is then cleared * by the guest OS /before/ checking for pending work, thus avoiding * a set-and-check race. Note that the mask is only accessed by Xen * on the CPU that is currently hosting the VCPU. This means that the * pending and mask flags can be updated by the guest without special * synchronisation (i.e., no need for the x86 LOCK prefix). * This may seem suboptimal because if the pending flag is set by * a different CPU then an IPI may be scheduled even when the mask * is set. However, note: * 1. The task of 'interrupt holdoff' is covered by the per-event- * channel mask bits. A 'noisy' event that is continually being * triggered can be masked at source at this very precise * granularity. * 2. The main purpose of the per-VCPU mask is therefore to restrict * reentrant execution: whether for concurrency control, or to * prevent unbounded stack usage. Whatever the purpose, we expect * that the mask will be asserted only for short periods at a time, * and so the likelihood of a 'spurious' IPI is suitably small. * The mask is read before making an event upcall to the guest: a * non-zero mask therefore guarantees that the VCPU will not receive * an upcall activation. The mask is cleared when the VCPU requests * to block: this avoids wakeup-waiting races. */ uint8_t evtchn_upcall_pending; uint8_t evtchn_upcall_mask; xen_ulong_t evtchn_pending_sel; struct arch_vcpu_info arch; struct pvclock_vcpu_time_info time; }; /* 64 bytes (x86) */ /* * Xen/kernel shared data -- pointer provided in start_info. * NB. We expect that this struct is smaller than a page. */ struct shared_info { struct vcpu_info vcpu_info[MAX_VIRT_CPUS]; /* * A domain can create "event channels" on which it can send and receive * asynchronous event notifications. There are three classes of event that * are delivered by this mechanism: * 1. Bi-directional inter- and intra-domain connections. Domains must * arrange out-of-band to set up a connection (usually by allocating * an unbound 'listener' port and avertising that via a storage service * such as xenstore). * 2. Physical interrupts. A domain with suitable hardware-access * privileges can bind an event-channel port to a physical interrupt * source. * 3. Virtual interrupts ('events'). A domain can bind an event-channel * port to a virtual interrupt source, such as the virtual-timer * device or the emergency console. * * Event channels are addressed by a "port index". Each channel is * associated with two bits of information: * 1. PENDING -- notifies the domain that there is a pending notification * to be processed. This bit is cleared by the guest. * 2. MASK -- if this bit is clear then a 0->1 transition of PENDING * will cause an asynchronous upcall to be scheduled. This bit is only * updated by the guest. It is read-only within Xen. If a channel * becomes pending while the channel is masked then the 'edge' is lost * (i.e., when the channel is unmasked, the guest must manually handle * pending notifications as no upcall will be scheduled by Xen). * * To expedite scanning of pending notifications, any 0->1 pending * transition on an unmasked channel causes a corresponding bit in a * per-vcpu selector word to be set. Each bit in the selector covers a * 'C long' in the PENDING bitfield array. */ xen_ulong_t evtchn_pending[sizeof(xen_ulong_t) * 8]; xen_ulong_t evtchn_mask[sizeof(xen_ulong_t) * 8]; /* * Wallclock time: updated only by control software. Guests should base * their gettimeofday() syscall on this wallclock-base value. */ struct pvclock_wall_clock wc; #ifndef CONFIG_X86_32 uint32_t wc_sec_hi; #endif struct arch_shared_info arch; }; /* * Start-of-day memory layout * * 1. The domain is started within contiguous virtual-memory region. * 2. The contiguous region begins and ends on an aligned 4MB boundary. * 3. This the order of bootstrap elements in the initial virtual region: * a. relocated kernel image * b. initial ram disk [mod_start, mod_len] * (may be omitted) * c. list of allocated page frames [mfn_list, nr_pages] * (unless relocated due to XEN_ELFNOTE_INIT_P2M) * d. start_info_t structure [register ESI (x86)] * in case of dom0 this page contains the console info, too * e. unless dom0: xenstore ring page * f. unless dom0: console ring page * g. bootstrap page tables [pt_base, CR3 (x86)] * h. bootstrap stack [register ESP (x86)] * 4. Bootstrap elements are packed together, but each is 4kB-aligned. * 5. The list of page frames forms a contiguous 'pseudo-physical' memory * layout for the domain. In particular, the bootstrap virtual-memory * region is a 1:1 mapping to the first section of the pseudo-physical map. * 6. All bootstrap elements are mapped read-writable for the guest OS. The * only exception is the bootstrap page table, which is mapped read-only. * 7. There is guaranteed to be at least 512kB padding after the final * bootstrap element. If necessary, the bootstrap virtual region is * extended by an extra 4MB to ensure this. */ #define MAX_GUEST_CMDLINE 1024 struct start_info { /* THE FOLLOWING ARE FILLED IN BOTH ON INITIAL BOOT AND ON RESUME. */ char magic[32]; /* "xen-<version>-<platform>". */ unsigned long nr_pages; /* Total pages allocated to this domain. */ unsigned long shared_info; /* MACHINE address of shared info struct. */ uint32_t flags; /* SIF_xxx flags. */ xen_pfn_t store_mfn; /* MACHINE page number of shared page. */ uint32_t store_evtchn; /* Event channel for store communication. */ union { struct { xen_pfn_t mfn; /* MACHINE page number of console page. */ uint32_t evtchn; /* Event channel for console page. */ } domU; struct { uint32_t info_off; /* Offset of console_info struct. */ uint32_t info_size; /* Size of console_info struct from start.*/ } dom0; } console; /* THE FOLLOWING ARE ONLY FILLED IN ON INITIAL BOOT (NOT RESUME). */ unsigned long pt_base; /* VIRTUAL address of page directory. */ unsigned long nr_pt_frames; /* Number of bootstrap p.t. frames. */ unsigned long mfn_list; /* VIRTUAL address of page-frame list. */ unsigned long mod_start; /* VIRTUAL address of pre-loaded module. */ unsigned long mod_len; /* Size (bytes) of pre-loaded module. */ int8_t cmd_line[MAX_GUEST_CMDLINE]; /* The pfn range here covers both page table and p->m table frames. */ unsigned long first_p2m_pfn;/* 1st pfn forming initial P->M table. */ unsigned long nr_p2m_frames;/* # of pfns forming initial P->M table. */ }; /* These flags are passed in the 'flags' field of start_info_t. */ #define SIF_PRIVILEGED (1<<0) /* Is the domain privileged? */ #define SIF_INITDOMAIN (1<<1) /* Is this the initial control domain? */ #define SIF_MULTIBOOT_MOD (1<<2) /* Is mod_start a multiboot module? */ #define SIF_MOD_START_PFN (1<<3) /* Is mod_start a PFN? */ #define SIF_VIRT_P2M_4TOOLS (1<<4) /* Do Xen tools understand a virt. mapped */ /* P->M making the 3 level tree obsolete? */ #define SIF_PM_MASK (0xFF<<8) /* reserve 1 byte for xen-pm options */ /* * A multiboot module is a package containing modules very similar to a * multiboot module array. The only differences are: * - the array of module descriptors is by convention simply at the beginning * of the multiboot module, * - addresses in the module descriptors are based on the beginning of the * multiboot module, * - the number of modules is determined by a termination descriptor that has * mod_start == 0. * * This permits to both build it statically and reference it in a configuration * file, and let the PV guest easily rebase the addresses to virtual addresses * and at the same time count the number of modules. */ struct xen_multiboot_mod_list { /* Address of first byte of the module */ uint32_t mod_start; /* Address of last byte of the module (inclusive) */ uint32_t mod_end; /* Address of zero-terminated command line */ uint32_t cmdline; /* Unused, must be zero */ uint32_t pad; }; /* * The console structure in start_info.console.dom0 * * This structure includes a variety of information required to * have a working VGA/VESA console. */ struct dom0_vga_console_info { uint8_t video_type; #define XEN_VGATYPE_TEXT_MODE_3 0x03 #define XEN_VGATYPE_VESA_LFB 0x23 #define XEN_VGATYPE_EFI_LFB 0x70 union { struct { /* Font height, in pixels. */ uint16_t font_height; /* Cursor location (column, row). */ uint16_t cursor_x, cursor_y; /* Number of rows and columns (dimensions in characters). */ uint16_t rows, columns; } text_mode_3; struct { /* Width and height, in pixels. */ uint16_t width, height; /* Bytes per scan line. */ uint16_t bytes_per_line; /* Bits per pixel. */ uint16_t bits_per_pixel; /* LFB physical address, and size (in units of 64kB). */ uint32_t lfb_base; uint32_t lfb_size; /* RGB mask offsets and sizes, as defined by VBE 1.2+ */ uint8_t red_pos, red_size; uint8_t green_pos, green_size; uint8_t blue_pos, blue_size; uint8_t rsvd_pos, rsvd_size; /* VESA capabilities (offset 0xa, VESA command 0x4f00). */ uint32_t gbl_caps; /* Mode attributes (offset 0x0, VESA command 0x4f01). */ uint16_t mode_attrs; uint16_t pad; /* high 32 bits of lfb_base */ uint32_t ext_lfb_base; } vesa_lfb; } u; }; typedef uint64_t cpumap_t; typedef uint8_t xen_domain_handle_t[16]; /* Turn a plain number into a C unsigned long constant. */ #define __mk_unsigned_long(x) x ## UL #define mk_unsigned_long(x) __mk_unsigned_long(x) #define TMEM_SPEC_VERSION 1 struct tmem_op { uint32_t cmd; int32_t pool_id; union { struct { /* for cmd == TMEM_NEW_POOL */ uint64_t uuid[2]; uint32_t flags; } new; struct { uint64_t oid[3]; uint32_t index; uint32_t tmem_offset; uint32_t pfn_offset; uint32_t len; GUEST_HANDLE(void) gmfn; /* guest machine page frame */ } gen; } u; }; DEFINE_GUEST_HANDLE(u64); #else /* __ASSEMBLY__ */ /* In assembly code we cannot use C numeric constant suffixes. */ #define mk_unsigned_long(x) x #endif /* !__ASSEMBLY__ */ #endif /* __XEN_PUBLIC_XEN_H__ */