#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/regulator/consumer.h>
#define FEIYANG_INIT_CMD_LEN 2
struct feiyang {
struct drm_panel panel;
struct mipi_dsi_device *dsi;
struct regulator *dvdd;
struct regulator *avdd;
struct gpio_desc *reset;
};
static inline struct feiyang *panel_to_feiyang(struct drm_panel *panel)
{
return container_of(panel, struct feiyang, panel);
}
struct feiyang_init_cmd {
u8 data[FEIYANG_INIT_CMD_LEN];
};
static const struct feiyang_init_cmd feiyang_init_cmds[] = {
{ .data = { 0x80, 0x58 } },
{ .data = { 0x81, 0x47 } },
{ .data = { 0x82, 0xD4 } },
{ .data = { 0x83, 0x88 } },
{ .data = { 0x84, 0xA9 } },
{ .data = { 0x85, 0xC3 } },
{ .data = { 0x86, 0x82 } },
};
static int feiyang_prepare(struct drm_panel *panel)
{
struct feiyang *ctx = panel_to_feiyang(panel);
struct mipi_dsi_device *dsi = ctx->dsi;
unsigned int i;
int ret;
ret = regulator_enable(ctx->dvdd);
if (ret)
return ret;
msleep(10);
ret = regulator_enable(ctx->avdd);
if (ret)
return ret;
msleep(20);
gpiod_set_value(ctx->reset, 0);
msleep(20);
gpiod_set_value(ctx->reset, 1);
msleep(200);
for (i = 0; i < ARRAY_SIZE(feiyang_init_cmds); i++) {
const struct feiyang_init_cmd *cmd =
&feiyang_init_cmds[i];
ret = mipi_dsi_dcs_write_buffer(dsi, cmd->data,
FEIYANG_INIT_CMD_LEN);
if (ret < 0)
return ret;
}
return 0;
}
static int feiyang_enable(struct drm_panel *panel)
{
struct feiyang *ctx = panel_to_feiyang(panel);
msleep(200);
mipi_dsi_dcs_set_display_on(ctx->dsi);
return 0;
}
static int feiyang_disable(struct drm_panel *panel)
{
struct feiyang *ctx = panel_to_feiyang(panel);
return mipi_dsi_dcs_set_display_off(ctx->dsi);
}
static int feiyang_unprepare(struct drm_panel *panel)
{
struct feiyang *ctx = panel_to_feiyang(panel);
int ret;
ret = mipi_dsi_dcs_set_display_off(ctx->dsi);
if (ret < 0)
dev_err(panel->dev, "failed to set display off: %d\n", ret);
ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi);
if (ret < 0)
dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret);
msleep(200);
gpiod_set_value(ctx->reset, 0);
regulator_disable(ctx->avdd);
msleep(10);
regulator_disable(ctx->dvdd);
return 0;
}
static const struct drm_display_mode feiyang_default_mode = {
.clock = 55000,
.hdisplay = 1024,
.hsync_start = 1024 + 310,
.hsync_end = 1024 + 310 + 20,
.htotal = 1024 + 310 + 20 + 90,
.vdisplay = 600,
.vsync_start = 600 + 12,
.vsync_end = 600 + 12 + 2,
.vtotal = 600 + 12 + 2 + 21,
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
};
static int feiyang_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct feiyang *ctx = panel_to_feiyang(panel);
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, &feiyang_default_mode);
if (!mode) {
dev_err(&ctx->dsi->dev, "failed to add mode %ux%u@%u\n",
feiyang_default_mode.hdisplay,
feiyang_default_mode.vdisplay,
drm_mode_vrefresh(&feiyang_default_mode));
return -ENOMEM;
}
drm_mode_set_name(mode);
drm_mode_probed_add(connector, mode);
return 1;
}
static const struct drm_panel_funcs feiyang_funcs = {
.disable = feiyang_disable,
.unprepare = feiyang_unprepare,
.prepare = feiyang_prepare,
.enable = feiyang_enable,
.get_modes = feiyang_get_modes,
};
static int feiyang_dsi_probe(struct mipi_dsi_device *dsi)
{
struct feiyang *ctx;
int ret;
ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
mipi_dsi_set_drvdata(dsi, ctx);
ctx->dsi = dsi;
drm_panel_init(&ctx->panel, &dsi->dev, &feiyang_funcs,
DRM_MODE_CONNECTOR_DSI);
ctx->dvdd = devm_regulator_get(&dsi->dev, "dvdd");
if (IS_ERR(ctx->dvdd))
return dev_err_probe(&dsi->dev, PTR_ERR(ctx->dvdd),
"Couldn't get dvdd regulator\n");
ctx->avdd = devm_regulator_get(&dsi->dev, "avdd");
if (IS_ERR(ctx->avdd))
return dev_err_probe(&dsi->dev, PTR_ERR(ctx->avdd),
"Couldn't get avdd regulator\n");
ctx->reset = devm_gpiod_get_optional(&dsi->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset))
return dev_err_probe(&dsi->dev, PTR_ERR(ctx->reset),
"Couldn't get our reset GPIO\n");
ret = drm_panel_of_backlight(&ctx->panel);
if (ret)
return ret;
drm_panel_add(&ctx->panel);
dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->lanes = 4;
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
drm_panel_remove(&ctx->panel);
return ret;
}
return 0;
}
static void feiyang_dsi_remove(struct mipi_dsi_device *dsi)
{
struct feiyang *ctx = mipi_dsi_get_drvdata(dsi);
mipi_dsi_detach(dsi);
drm_panel_remove(&ctx->panel);
}
static const struct of_device_id feiyang_of_match[] = {
{ .compatible = "feiyang,fy07024di26a30d", },
{ }
};
MODULE_DEVICE_TABLE(of, feiyang_of_match);
static struct mipi_dsi_driver feiyang_driver = {
.probe = feiyang_dsi_probe,
.remove = feiyang_dsi_remove,
.driver = {
.name = "feiyang-fy07024di26a30d",
.of_match_table = feiyang_of_match,
},
};
module_mipi_dsi_driver(feiyang_driver);
MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>");
MODULE_DESCRIPTION("Feiyang FY07024DI26A30-D MIPI-DSI LCD panel");
MODULE_LICENSE("GPL"