// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Copyright (c) 2022-2026 Axiado Corporation
 */

#include <linux/bitfield.h>
#include <linux/bitmap.h>
#include <linux/bitops.h>
#include <linux/bits.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/regmap.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdesc.h>
#include <linux/irqdomain.h>
#include <linux/math.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/types.h>

struct axiado_sgpio_reg_offsets {
	u32 mux_0;
	u32 preset_0;
	u32 count_0;
	u32 pos_0;

	u32 mux_1;
	u32 ld;
	u32 ld_ss;

	u32 preset_1;
	u32 count_1;
	u32 pos_1;

	u32 mux_2;
	u32 dout;
	u32 dout_ss;

	u32 preset_2;
	u32 count_2;
	u32 pos_2;

	u32 mux_3;
	u32 preset_3;
	u32 count_3;
	u32 pos_3;

	u32 mux_4;
	u32 oe;
	u32 oe_ss;

	u32 preset_4;
	u32 count_4;
	u32 pos_4;

	u32 mask;
	u32 ctrl_en;
	u32 ctrl_en_pos;

	u32 din_ss;
	u32 status;
};

static const struct axiado_sgpio_reg_offsets axiado_sgpio_offsets = {
	.mux_0 = 0x000,
	.preset_0 = 0x1dc,
	.count_0 = 0x1f0,
	.pos_0 = 0x204,

	.mux_1 = 0x004,
	.ld = 0x014,
	.ld_ss = 0x0d8,

	.preset_1 = 0x1e0,
	.count_1 = 0x1f4,
	.pos_1 = 0x208,

	.mux_2 = 0x008,
	.dout = 0x054,
	.dout_ss = 0x158,

	.preset_2 = 0x1e4,
	.count_2 = 0x1f8,
	.pos_2 = 0x20c,

	.mux_3 = 0x00c,
	.preset_3 = 0x1e8,
	.count_3 = 0x1fc,
	.pos_3 = 0x210,

	.mux_4 = 0x010,
	.oe = 0x0d4,
	.oe_ss = 0x1d8,

	.preset_4 = 0x1ec,
	.count_4 = 0x200,
	.pos_4 = 0x214,

	.mask = 0x224,
	.ctrl_en = 0x218,
	.ctrl_en_pos = 0x21c,

	.din_ss = 0x198,
	.status = 0x228,
};

/* Number of SGPIO positions held by one bank register. */
#define SGPIO_BANK_SIZE			32
#define SGPIO_MAX_SIGNALS		512
#define SGPIO_NUM_BANKS			16

/*
 * Slice mux encodings taken from the AX3005 SGPIO programming sequence.
 */
#define SGPIO_MUX_CLK			0x306
#define SGPIO_MUX_DATA			0x30c
#define SGPIO_MUX_DIN			0x14c
#define SGPIO_MUX_OE			0x10c

/* A POS register holds the first and the last position driven by the slice. */
#define SGPIO_POS_FIRST			GENMASK(31, 16)
#define SGPIO_POS_LAST			GENMASK(15, 0)
#define SGPIO_POS(pos)			(FIELD_PREP(SGPIO_POS_FIRST, (pos)) | \
					 FIELD_PREP(SGPIO_POS_LAST, (pos)))

/* The clock and output enable slices always cover a full bank. */
#define SGPIO_POS_FULL_BANK		SGPIO_POS(SGPIO_BANK_SIZE - 1)

/* The enable and interrupt registers hold one bit per slice. */
#define SGPIO_SLICE_MASK		GENMASK(15, 0)

/*
 * Interrupt sources enabled by the programming sequence. Bit 13 is left
 * masked, the remaining slice events are all reported.
 */
#define SGPIO_IRQ_ENABLE		0xdfff

/* The upper half of the status register reports one bit per data bank. */
#define SGPIO_STATUS_EXCHANGE		GENMASK(31, 16)

struct axiado_sgpio {
	u32 preset_value;
	u32 count_value;
	u32 pos_reg;
	/* Last sampled input word of each bank, for edge detection. */
	u32 *din_shadow;
	unsigned long *irq_unmasked;
	unsigned long *irq_rising;
	unsigned long *irq_falling;
	u32 nsignals;
	u32 din_bank_shift;
	unsigned long *dir_out;
	struct gpio_regmap *gpio;
	struct irq_domain *domain;
	struct regmap *regmap;
	const struct axiado_sgpio_reg_offsets *regs;
};

/*
 * Tell lockdep that these interrupts are in a different category than the
 * parent they are handled from, so that the nested handling is not reported
 * as recursion.
 */
static struct lock_class_key axiado_sgpio_irq_lock_class;
static struct lock_class_key axiado_sgpio_irq_request_class;

/*
 * Each SGPIO signal is exposed as two GPIO lines: an even line for the serial
 * input and the following odd line for the serial output. Signal n therefore
 * lives in bit (n % 32) of bank (n / 32) of either the input or the output
 * register.
 */
static int axiado_sgpio_reg_mask_xlate(struct gpio_regmap *gpio,
				       enum gpio_regmap_operation op,
				       unsigned int base, unsigned int offset,
				       unsigned int *reg, unsigned int *mask)
{
	struct axiado_sgpio *sgpio = gpio_regmap_get_drvdata(gpio);
	unsigned int signal = offset / 2;
	unsigned int bank = signal / SGPIO_BANK_SIZE;

	/*
	 * An output line lives in the output register for both reads and
	 * writes, so the register follows from the line rather than from the
	 * operation. The AX3005 input banks are right aligned, hence the
	 * shift.
	 */
	if (offset % 2)
		base = sgpio->regs->dout_ss;
	else
		bank += sgpio->din_bank_shift;

	*reg = base + bank * sizeof(u32);
	*mask = BIT(signal % SGPIO_BANK_SIZE);

	return 0;
}

static irqreturn_t axiado_sgpio_irq_handler(int irq, void *arg)
{
	struct axiado_sgpio *sgpio = arg;
	unsigned int nbanks = DIV_ROUND_UP(sgpio->nsignals, SGPIO_BANK_SIZE);
	u32 status, new_value, changed_value;
	unsigned int bit, reg_ptr, i;
	int ret;

	/* Read-on-clear (ACK) parent cause */
	ret = regmap_read(sgpio->regmap, sgpio->regs->status, &status);
	if (ret)
		return IRQ_NONE;

	/* Nothing pending: the interrupt came from somebody else. */
	if (!status)
		return IRQ_NONE;

	status = FIELD_GET(SGPIO_STATUS_EXCHANGE, status);

	reg_ptr = sgpio->din_bank_shift;

	for (i = 0; i < nbanks; i++, reg_ptr++) {
		if (status & BIT(reg_ptr)) {
			ret = regmap_read(sgpio->regmap,
					  sgpio->regs->din_ss + reg_ptr * sizeof(u32),
					  &new_value);
			if (ret)
				continue;

			/*
			 * Track every signal so that the shadow always holds
			 * the last sampled level, then report only the ones
			 * whose interrupt is unmasked. Transitions of a masked
			 * signal are dropped rather than delivered later, the
			 * hardware has no per signal latch to replay them
			 * from. Only this handler touches the shadow and it is
			 * not reentrant.
			 */
			changed_value = sgpio->din_shadow[i] ^ new_value;
			sgpio->din_shadow[i] = new_value;
			changed_value &= bitmap_read(sgpio->irq_unmasked,
						     i * SGPIO_BANK_SIZE,
						     SGPIO_BANK_SIZE);

			while (changed_value) {
				unsigned int child_irq;
				irq_hw_number_t hwirq;
				unsigned int position;
				bool rising;

				bit = __ffs(changed_value);
				changed_value &= ~BIT(bit);

				position = i * SGPIO_BANK_SIZE + bit;
				hwirq = position * 2;

				rising = !!(new_value & BIT(bit));

				if (!test_bit(position, rising ? sgpio->irq_rising
							       : sgpio->irq_falling))
					continue;

				child_irq = irq_find_mapping(sgpio->domain, hwirq);
				if (child_irq)
					handle_nested_irq(child_irq);
			}
		}
	}

	return IRQ_HANDLED;
}

static int axiado_sgpio_hw_init(struct axiado_sgpio *sgpio)
{
	const struct axiado_sgpio_reg_offsets *regs = sgpio->regs;
	unsigned int nbanks = DIV_ROUND_UP(sgpio->nsignals, SGPIO_BANK_SIZE);
	unsigned int last_bank = (sgpio->nsignals - 1) / SGPIO_BANK_SIZE;
	unsigned int last_bit = (sgpio->nsignals - 1) % SGPIO_BANK_SIZE;
	unsigned int i;
	int ret;

	/* Slice A0 is the shift clock, slice B1 the data load. */
	const struct reg_sequence pre_load[] = {
		{ regs->mask, 0 },
		{ regs->mux_0, SGPIO_MUX_CLK },
		{ regs->preset_0, sgpio->preset_value },
		{ regs->count_0, sgpio->count_value },
		{ regs->pos_0, SGPIO_POS_FULL_BANK },
		{ regs->mux_1, SGPIO_MUX_DATA },
	};
	/* Slice C2 is the data output. */
	const struct reg_sequence pre_dout[] = {
		{ regs->preset_1, sgpio->preset_value },
		{ regs->count_1, sgpio->count_value },
		{ regs->pos_1, sgpio->pos_reg },
		{ regs->mux_2, SGPIO_MUX_DATA },
	};
	/* Slice D3 is the data input, slice E4 the output enable. */
	const struct reg_sequence post_dout[] = {
		{ regs->preset_2, sgpio->preset_value },
		{ regs->count_2, sgpio->count_value },
		{ regs->pos_2, sgpio->pos_reg },
		{ regs->mux_3, SGPIO_MUX_DIN },
		{ regs->preset_3, sgpio->preset_value },
		{ regs->count_3, sgpio->count_value },
		{ regs->pos_3, sgpio->pos_reg },
		{ regs->mux_4, SGPIO_MUX_OE },
		{ regs->oe, GENMASK(31, 0) },
		{ regs->oe_ss, GENMASK(31, 0) },
		{ regs->preset_4, sgpio->preset_value },
		{ regs->count_4, sgpio->count_value },
		{ regs->pos_4, SGPIO_POS_FULL_BANK },
		{ regs->ctrl_en, SGPIO_SLICE_MASK },
		{ regs->ctrl_en_pos, SGPIO_SLICE_MASK },
	};

	ret = regmap_multi_reg_write(sgpio->regmap, pre_load,
				     ARRAY_SIZE(pre_load));
	if (ret)
		return ret;

	/*
	 * Latch the signals that are present. Only the last bank may be
	 * partially populated; a last bit of zero still describes one signal.
	 */
	for (i = 0; i < nbanks; i++) {
		u32 val = i < last_bank ? GENMASK(SGPIO_BANK_SIZE - 1, 0) :
					  GENMASK(last_bit, 0);

		ret = regmap_write(sgpio->regmap, regs->ld + i * 4, val);
		if (ret)
			return ret;

		ret = regmap_write(sgpio->regmap, regs->ld_ss + i * 4, val);
		if (ret)
			return ret;
	}

	ret = regmap_multi_reg_write(sgpio->regmap, pre_dout,
				     ARRAY_SIZE(pre_dout));
	if (ret)
		return ret;

	/* All outputs start out driving zero. */
	for (i = 0; i < nbanks; i++) {
		ret = regmap_write(sgpio->regmap, regs->dout + i * 4, 0);
		if (ret)
			return ret;

		ret = regmap_write(sgpio->regmap, regs->dout_ss + i * 4, 0);
		if (ret)
			return ret;
	}

	return regmap_multi_reg_write(sgpio->regmap, post_dout,
				      ARRAY_SIZE(post_dout));
}

static int axiado_sgpio_irq_enable(struct axiado_sgpio *sgpio)
{
	return regmap_write(sgpio->regmap, sgpio->regs->mask,
			    SGPIO_IRQ_ENABLE);
}

static void axiado_sgpio_disable(void *data)
{
	struct axiado_sgpio *sgpio = data;

	/* Mask the interrupts and stop the shift engine. */
	regmap_write(sgpio->regmap, sgpio->regs->mask, 0);
	regmap_write(sgpio->regmap, sgpio->regs->ctrl_en, 0);
}

static int axiado_sgpio_set_irq_type(struct irq_data *d, unsigned int type)
{
	struct axiado_sgpio *sgpio = irq_data_get_irq_chip_data(d);
	irq_hw_number_t hwirq = irqd_to_hwirq(d);
	unsigned int position;

	/* Only even GPIO offsets represent SGPIO inputs. */
	if (hwirq & 1)
		return -EINVAL;

	position = hwirq / 2;
	if (position >= sgpio->nsignals)
		return -EINVAL;

	type &= IRQ_TYPE_SENSE_MASK;

	switch (type) {
	case IRQ_TYPE_EDGE_BOTH:
	case IRQ_TYPE_EDGE_RISING:
	case IRQ_TYPE_EDGE_FALLING:
		break;
	default:
		return -EINVAL;
	}

	assign_bit(position, sgpio->irq_rising, type & IRQ_TYPE_EDGE_RISING);
	assign_bit(position, sgpio->irq_falling, type & IRQ_TYPE_EDGE_FALLING);

	return 0;
}

static void axiado_sgpio_mask_irq(struct irq_data *d)
{
	struct axiado_sgpio *sgpio = irq_data_get_irq_chip_data(d);
	irq_hw_number_t hwirq = irqd_to_hwirq(d);

	clear_bit(hwirq / 2, sgpio->irq_unmasked);
	gpio_regmap_disable_irq(sgpio->gpio, hwirq);
}

static void axiado_sgpio_unmask_irq(struct irq_data *d)
{
	struct axiado_sgpio *sgpio = irq_data_get_irq_chip_data(d);
	irq_hw_number_t hwirq = irqd_to_hwirq(d);

	gpio_regmap_enable_irq(sgpio->gpio, hwirq);
	set_bit(hwirq / 2, sgpio->irq_unmasked);
}

static int axiado_sgpio_irq_request_resources(struct irq_data *d)
{
	struct axiado_sgpio *sgpio = irq_data_get_irq_chip_data(d);

	return gpio_regmap_reqres_irq(sgpio->gpio, d->hwirq);
}

static void axiado_sgpio_irq_release_resources(struct irq_data *d)
{
	struct axiado_sgpio *sgpio = irq_data_get_irq_chip_data(d);

	gpio_regmap_relres_irq(sgpio->gpio, d->hwirq);
}

static const struct irq_chip axiado_sgpio_irqchip = {
	.name = "axiado-sgpio",
	.irq_mask = axiado_sgpio_mask_irq,
	.irq_unmask = axiado_sgpio_unmask_irq,
	.irq_set_type = axiado_sgpio_set_irq_type,
	.flags = IRQCHIP_IMMUTABLE | IRQCHIP_MASK_ON_SUSPEND,
	.irq_request_resources = axiado_sgpio_irq_request_resources,
	.irq_release_resources = axiado_sgpio_irq_release_resources,
};

static int axiado_sgpio_irq_map(struct irq_domain *domain, unsigned int virq,
				irq_hw_number_t hwirq)
{
	struct axiado_sgpio *sgpio = domain->host_data;

	/* Only even offsets represent input GPIOs. */
	if (hwirq % 2)
		return -EINVAL;

	irq_set_chip_data(virq, sgpio);
	irq_set_lockdep_class(virq, &axiado_sgpio_irq_lock_class,
			      &axiado_sgpio_irq_request_class);
	irq_set_chip_and_handler(virq, &axiado_sgpio_irqchip, handle_simple_irq);
	irq_set_nested_thread(virq, true);
	irq_set_noprobe(virq);

	return 0;
}

static const struct irq_domain_ops axiado_sgpio_domain_ops = {
	.map = axiado_sgpio_irq_map,
	.xlate = irq_domain_xlate_twocell,
};

static int axiado_sgpio_init_input_cache(struct axiado_sgpio *sgpio)
{
	unsigned int num_banks = DIV_ROUND_UP(sgpio->nsignals,
					      SGPIO_BANK_SIZE);
	unsigned int reg_ptr = sgpio->din_bank_shift;
	unsigned int i;
	int ret;

	for (i = 0; i < num_banks; i++, reg_ptr++) {
		ret = regmap_read(sgpio->regmap,
				  sgpio->regs->din_ss + reg_ptr * sizeof(u32),
				  &sgpio->din_shadow[i]);
		if (ret)
			return ret;
	}

	return 0;
}

static bool axiado_sgpio_dout_reg(const struct axiado_sgpio *sgpio,
				  unsigned int reg)
{
	unsigned int span = SGPIO_NUM_BANKS * sizeof(u32);

	return reg >= sgpio->regs->dout_ss &&
	       reg < sgpio->regs->dout_ss + span;
}

static bool axiado_sgpio_readable_reg(struct device *dev, unsigned int reg)
{
	const struct axiado_sgpio *sgpio = dev_get_drvdata(dev);

	/* The status register is the last one of the block. */
	if (reg > sgpio->regs->status)
		return false;

	/*
	 * The output shadow feeds the shift register and cannot be read back,
	 * the driven value is kept in the register cache instead.
	 */
	return !axiado_sgpio_dout_reg(sgpio, reg);
}

static bool axiado_sgpio_volatile_reg(struct device *dev, unsigned int reg)
{
	const struct axiado_sgpio *sgpio = dev_get_drvdata(dev);

	/*
	 * Everything but the output shadow is live hardware state: shifted in
	 * data, running counters and the interrupt status. Caching any of it
	 * would hand out stale values, so the cache holds the output banks
	 * alone.
	 */
	return !axiado_sgpio_dout_reg(sgpio, reg);
}

static bool axiado_sgpio_precious_reg(struct device *dev, unsigned int reg)
{
	const struct axiado_sgpio *sgpio = dev_get_drvdata(dev);

	/* Reading the status register acknowledges the interrupts. */
	return reg == sgpio->regs->status;
}

static const struct regmap_config axiado_sgpio_regmap_config = {
	.reg_bits = 32,
	.val_bits = 32,
	.reg_stride = 4,
	.readable_reg = axiado_sgpio_readable_reg,
	.volatile_reg = axiado_sgpio_volatile_reg,
	.precious_reg = axiado_sgpio_precious_reg,
	.cache_type = REGCACHE_MAPLE,
};

static int axiado_sgpio_probe(struct platform_device *pdev)
{
	struct gpio_regmap_config config = { };
	struct irq_domain_info d_info = { };
	struct axiado_sgpio *sgpio;
	unsigned int ngpio, i;
	unsigned long apb_freq;
	struct clk *apb_clk;
	void __iomem *base;
	u32 sgpio_freq;
	int irq, rc;

	sgpio = devm_kzalloc_obj(&pdev->dev, *sgpio);
	if (!sgpio)
		return -ENOMEM;

	/* The regmap callbacks below need both of these. */
	platform_set_drvdata(pdev, sgpio);

	sgpio->regs = &axiado_sgpio_offsets;

	base = devm_platform_ioremap_resource(pdev, 0);
	if (IS_ERR(base))
		return PTR_ERR(base);

	sgpio->regmap = devm_regmap_init_mmio(&pdev->dev, base,
					      &axiado_sgpio_regmap_config);
	if (IS_ERR(sgpio->regmap))
		return dev_err_probe(&pdev->dev, PTR_ERR(sgpio->regmap),
				     "Failed to init regmap\n");

	rc = device_property_read_u32(&pdev->dev, "ngpios", &ngpio);
	if (rc)
		return dev_err_probe(&pdev->dev, rc,
				     "Failed to read ngpios property\n");

	/*
	 * Each SGPIO signal is exposed as one input and one output line, so
	 * the number of lines is twice the number of signals.
	 */
	if (!ngpio || ngpio % 2 || ngpio > SGPIO_MAX_SIGNALS * 2)
		return dev_err_probe(&pdev->dev, -EINVAL,
				     "Invalid ngpios value: %u (even, max %u)\n",
				     ngpio, SGPIO_MAX_SIGNALS * 2);

	sgpio->nsignals = ngpio / 2;

	sgpio->din_shadow = devm_kzalloc_objs(&pdev->dev, *sgpio->din_shadow,
					      DIV_ROUND_UP(sgpio->nsignals, SGPIO_BANK_SIZE));
	sgpio->irq_unmasked = devm_bitmap_zalloc(&pdev->dev, sgpio->nsignals,
						 GFP_KERNEL);
	sgpio->irq_rising = devm_bitmap_zalloc(&pdev->dev, sgpio->nsignals,
					       GFP_KERNEL);
	sgpio->irq_falling = devm_bitmap_zalloc(&pdev->dev, sgpio->nsignals,
						GFP_KERNEL);
	if (!sgpio->din_shadow || !sgpio->irq_unmasked ||
	    !sgpio->irq_rising || !sgpio->irq_falling)
		return -ENOMEM;

	apb_clk = devm_clk_get_enabled(&pdev->dev, NULL);
	if (IS_ERR(apb_clk))
		return dev_err_probe(&pdev->dev, PTR_ERR(apb_clk),
				     "Failed to get and enable APB clock\n");

	rc = device_property_read_u32(&pdev->dev, "bus-frequency",
				      &sgpio_freq);
	if (rc)
		return dev_err_probe(&pdev->dev, rc,
				     "Failed to read bus-frequency\n");

	apb_freq = clk_get_rate(apb_clk);

	if (!apb_freq || !sgpio_freq || sgpio_freq > apb_freq)
		return dev_err_probe(&pdev->dev, -EINVAL,
				     "Invalid SGPIO bus frequency\n");

	sgpio->preset_value = (apb_freq / sgpio_freq) - 1;
	sgpio->count_value = sgpio->preset_value;

	sgpio->pos_reg = SGPIO_POS(sgpio->nsignals - 1);

	sgpio->din_bank_shift =	SGPIO_NUM_BANKS -
				DIV_ROUND_UP(sgpio->nsignals, SGPIO_BANK_SIZE);

	/*
	 * From here on the hardware may be running, so the shutdown action has
	 * to be in place before the first register is programmed. It only ever
	 * writes zeroes, which is harmless if initialisation never got that
	 * far, and it runs before the APB clock is disabled because that was
	 * requested earlier.
	 */
	rc = devm_add_action_or_reset(&pdev->dev, axiado_sgpio_disable, sgpio);
	if (rc)
		return rc;

	rc = axiado_sgpio_hw_init(sgpio);
	if (rc)
		return dev_err_probe(&pdev->dev, rc,
				     "Failed to initialize hardware\n");

	rc = axiado_sgpio_init_input_cache(sgpio);
	if (rc)
		return dev_err_probe(&pdev->dev, rc,
				     "Failed to initialize input cache\n");

	sgpio->dir_out = devm_bitmap_zalloc(&pdev->dev, ngpio, GFP_KERNEL);
	if (!sgpio->dir_out)
		return -ENOMEM;

	/* Even lines are the serial inputs, odd lines the serial outputs. */
	for (i = 1; i < ngpio; i += 2)
		__set_bit(i, sgpio->dir_out);

	d_info.fwnode = dev_fwnode(&pdev->dev);
	d_info.size = ngpio;
	d_info.hwirq_max = ngpio;
	d_info.ops = &axiado_sgpio_domain_ops;
	d_info.host_data = sgpio;

	sgpio->domain = devm_irq_domain_instantiate(&pdev->dev, &d_info);
	if (IS_ERR(sgpio->domain))
		return PTR_ERR(sgpio->domain);

	config.parent = &pdev->dev;
	config.regmap = sgpio->regmap;
	config.ngpio = ngpio;
	config.reg_dat_base = GPIO_REGMAP_ADDR(sgpio->regs->din_ss);
	config.reg_set_base = GPIO_REGMAP_ADDR(sgpio->regs->dout_ss);
	config.reg_mask_xlate = axiado_sgpio_reg_mask_xlate;
	config.fixed_direction_output = sgpio->dir_out;
	config.irq_domain = sgpio->domain;
	config.drvdata = sgpio;

	sgpio->gpio = devm_gpio_regmap_register(&pdev->dev, &config);
	if (IS_ERR(sgpio->gpio))
		return dev_err_probe(&pdev->dev, PTR_ERR(sgpio->gpio),
				     "Could not register gpiochip\n");

	irq = platform_get_irq(pdev, 0);
	if (irq < 0)
		return irq;

	rc = devm_request_threaded_irq(&pdev->dev, irq, NULL, axiado_sgpio_irq_handler,
				       IRQF_ONESHOT, dev_name(&pdev->dev), sgpio);
	if (rc)
		return dev_err_probe(&pdev->dev, rc, "Failed to request IRQ\n");

	rc = axiado_sgpio_irq_enable(sgpio);
	if (rc)
		return dev_err_probe(&pdev->dev, rc,
				     "Failed to enable interrupts\n");

	return 0;
}

static void axiado_sgpio_remove(struct platform_device *pdev)
{
	struct axiado_sgpio *sgpio = platform_get_drvdata(pdev);

	/*
	 * Runs before the devres unwind, so the interrupts are masked while the
	 * parent interrupt is still requested. The shift engine is stopped by
	 * axiado_sgpio_disable(), registered before the hardware was programmed
	 * so that it also covers failures during probe.
	 */
	regmap_write(sgpio->regmap, sgpio->regs->mask, 0);
}

static const struct of_device_id axiado_sgpio_of_match[] = {
	{ .compatible = "axiado,ax3005-sgpio" },
	{ }
};
MODULE_DEVICE_TABLE(of, axiado_sgpio_of_match);

static struct platform_driver axiado_sgpio_driver = {
	.driver = {
		.name = KBUILD_MODNAME,
		.of_match_table = axiado_sgpio_of_match,
	},
	.probe = axiado_sgpio_probe,
	.remove = axiado_sgpio_remove,
};
module_platform_driver(axiado_sgpio_driver);

MODULE_DESCRIPTION("Axiado AX3005 Serial GPIO Driver");
MODULE_AUTHOR("Axiado Corporation");
MODULE_LICENSE("GPL"