/* SPDX-License-Identifier: GPL-2.0 */
/*
 * Ftrace header.  For implementation details beyond the random comments
 * scattered below, see: Documentation/trace/ftrace-design.rst
 */

#ifndef _LINUX_FTRACE_H
#define _LINUX_FTRACE_H

#include <linux/trace_recursion.h>
#include <linux/trace_clock.h>
#include <linux/jump_label.h>
#include <linux/kallsyms.h>
#include <linux/linkage.h>
#include <linux/bitops.h>
#include <linux/ptrace.h>
#include <linux/ktime.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/fs.h>

#include <asm/ftrace.h>

/*
 * If the arch supports passing the variable contents of
 * function_trace_op as the third parameter back from the
 * mcount call, then the arch should define this as 1.
 */
#ifndef ARCH_SUPPORTS_FTRACE_OPS
#define ARCH_SUPPORTS_FTRACE_OPS 0
#endif

#ifdef CONFIG_TRACING
extern void ftrace_boot_snapshot(void);
#else
static inline void ftrace_boot_snapshot(void) { }
#endif

struct ftrace_ops;
struct ftrace_regs;
struct dyn_ftrace;

char *arch_ftrace_match_adjust(char *str, const char *search);

#ifdef CONFIG_HAVE_FUNCTION_GRAPH_RETVAL
struct fgraph_ret_regs;
unsigned long ftrace_return_to_handler(struct fgraph_ret_regs *ret_regs);
#else
unsigned long ftrace_return_to_handler(unsigned long frame_pointer);
#endif

#ifdef CONFIG_FUNCTION_TRACER
/*
 * If the arch's mcount caller does not support all of ftrace's
 * features, then it must call an indirect function that
 * does. Or at least does enough to prevent any unwelcome side effects.
 *
 * Also define the function prototype that these architectures use
 * to call the ftrace_ops_list_func().
 */
#if !ARCH_SUPPORTS_FTRACE_OPS
# define FTRACE_FORCE_LIST_FUNC 1
void arch_ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip);
#else
# define FTRACE_FORCE_LIST_FUNC 0
void arch_ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip,
			       struct ftrace_ops *op, struct ftrace_regs *fregs);
#endif
extern const struct ftrace_ops ftrace_nop_ops;
extern const struct ftrace_ops ftrace_list_ops;
struct ftrace_ops *ftrace_find_unique_ops(struct dyn_ftrace *rec);
#endif /* CONFIG_FUNCTION_TRACER */

/* Main tracing buffer and events set up */
#ifdef CONFIG_TRACING
void trace_init(void);
void early_trace_init(void);
#else
static inline void trace_init(void) { }
static inline void early_trace_init(void) { }
#endif

struct module;
struct ftrace_hash;
struct ftrace_direct_func;

#if defined(CONFIG_FUNCTION_TRACER) && defined(CONFIG_MODULES) && \
	defined(CONFIG_DYNAMIC_FTRACE)
const char *
ftrace_mod_address_lookup(unsigned long addr, unsigned long *size,
		   unsigned long *off, char **modname, char *sym);
#else
static inline const char *
ftrace_mod_address_lookup(unsigned long addr, unsigned long *size,
		   unsigned long *off, char **modname, char *sym)
{
	return NULL;
}
#endif

#if defined(CONFIG_FUNCTION_TRACER) && defined(CONFIG_DYNAMIC_FTRACE)
int ftrace_mod_get_kallsym(unsigned int symnum, unsigned long *value,
			   char *type, char *name,
			   char *module_name, int *exported);
#else
static inline int ftrace_mod_get_kallsym(unsigned int symnum, unsigned long *value,
					 char *type, char *name,
					 char *module_name, int *exported)
{
	return -1;
}
#endif

#ifdef CONFIG_FUNCTION_TRACER

extern int ftrace_enabled;

#ifndef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS

struct ftrace_regs {
	struct pt_regs		regs;
};
#define arch_ftrace_get_regs(fregs) (&(fregs)->regs)

/*
 * ftrace_regs_set_instruction_pointer() is to be defined by the architecture
 * if to allow setting of the instruction pointer from the ftrace_regs when
 * HAVE_DYNAMIC_FTRACE_WITH_ARGS is set and it supports live kernel patching.
 */
#define ftrace_regs_set_instruction_pointer(fregs, ip) do { } while (0)
#endif /* CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS */

static __always_inline struct pt_regs *ftrace_get_regs(struct ftrace_regs *fregs)
{
	if (!fregs)
		return NULL;

	return arch_ftrace_get_regs(fregs);
}

/*
 * When true, the ftrace_regs_{get,set}_*() functions may be used on fregs.
 * Note: this can be true even when ftrace_get_regs() cannot provide a pt_regs.
 */
static __always_inline bool ftrace_regs_has_args(struct ftrace_regs *fregs)
{
	if (IS_ENABLED(CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS))
		return true;

	return ftrace_get_regs(fregs) != NULL;
}

#ifndef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
#define ftrace_regs_get_instruction_pointer(fregs) \
	instruction_pointer(ftrace_get_regs(fregs))
#define ftrace_regs_get_argument(fregs, n) \
	regs_get_kernel_argument(ftrace_get_regs(fregs), n)
#define ftrace_regs_get_stack_pointer(fregs) \
	kernel_stack_pointer(ftrace_get_regs(fregs))
#define ftrace_regs_return_value(fregs) \
	regs_return_value(ftrace_get_regs(fregs))
#define ftrace_regs_set_return_value(fregs, ret) \
	regs_set_return_value(ftrace_get_regs(fregs), ret)
#define ftrace_override_function_with_return(fregs) \
	override_function_with_return(ftrace_get_regs(fregs))
#define ftrace_regs_query_register_offset(name) \
	regs_query_register_offset(name)
#endif

typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip,
			      struct ftrace_ops *op, struct ftrace_regs *fregs);

ftrace_func_t ftrace_ops_get_func(struct ftrace_ops *ops);

/*
 * FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are
 * set in the flags member.
 * CONTROL, SAVE_REGS, SAVE_REGS_IF_SUPPORTED, RECURSION, STUB and
 * IPMODIFY are a kind of attribute flags which can be set only before
 * registering the ftrace_ops, and can not be modified while registered.
 * Changing those attribute flags after registering ftrace_ops will
 * cause unexpected results.
 *
 * ENABLED - set/unset when ftrace_ops is registered/unregistered
 * DYNAMIC - set when ftrace_ops is registered to denote dynamically
 *           allocated ftrace_ops which need special care
 * SAVE_REGS - The ftrace_ops wants regs saved at each function called
 *            and passed to the callback. If this flag is set, but the
 *            architecture does not support passing regs
 *            (CONFIG_DYNAMIC_FTRACE_WITH_REGS is not defined), then the
 *            ftrace_ops will fail to register, unless the next flag
 *            is set.
 * SAVE_REGS_IF_SUPPORTED - This is the same as SAVE_REGS, but if the
 *            handler can handle an arch that does not save regs
 *            (the handler tests if regs == NULL), then it can set
 *            this flag instead. It will not fail registering the ftrace_ops
 *            but, the regs field will be NULL if the arch does not support
 *            passing regs to the handler.
 *            Note, if this flag is set, the SAVE_REGS flag will automatically
 *            get set upon registering the ftrace_ops, if the arch supports it.
 * RECURSION - The ftrace_ops can set this to tell the ftrace infrastructure
 *            that the call back needs recursion protection. If it does
 *            not set this, then the ftrace infrastructure will assume
 *            that the callback can handle recursion on its own.
 * STUB   - The ftrace_ops is just a place holder.
 * INITIALIZED - The ftrace_ops has already been initialized (first use time
 *            register_ftrace_function() is called, it will initialized the ops)
 * DELETED - The ops are being deleted, do not let them be registered again.
 * ADDING  - The ops is in the process of being added.
 * REMOVING - The ops is in the process of being removed.
 * MODIFYING - The ops is in the process of changing its filter functions.
 * ALLOC_TRAMP - A dynamic trampoline was allocated by the core code.
 *            The arch specific code sets this flag when it allocated a
 *            trampoline. This lets the arch know that it can update the
 *            trampoline in case the callback function changes.
 *            The ftrace_ops trampoline can be set by the ftrace users, and
 *            in such cases the arch must not modify it. Only the arch ftrace
 *            core code should set this flag.
 * IPMODIFY - The ops can modify the IP register. This can only be set with
 *            SAVE_REGS. If another ops with this flag set is already registered
 *            for any of the functions that this ops will be registered for, then
 *            this ops will fail to register or set_filter_ip.
 * PID     - Is affected by set_ftrace_pid (allows filtering on those pids)
 * RCU     - Set when the ops can only be called when RCU is watching.
 * TRACE_ARRAY - The ops->private points to a trace_array descriptor.
 * PERMANENT - Set when the ops is permanent and should not be affected by
 *             ftrace_enabled.
 * DIRECT - Used by the direct ftrace_ops helper for direct functions
 *            (internal ftrace only, should not be used by others)
 */
enum {
	FTRACE_OPS_FL_ENABLED			= BIT(0),
	FTRACE_OPS_FL_DYNAMIC			= BIT(1),
	FTRACE_OPS_FL_SAVE_REGS			= BIT(2),
	FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED	= BIT(3),
	FTRACE_OPS_FL_RECURSION			= BIT(4),
	FTRACE_OPS_FL_STUB			= BIT(5),
	FTRACE_OPS_FL_INITIALIZED		= BIT(6),
	FTRACE_OPS_FL_DELETED			= BIT(7),
	FTRACE_OPS_FL_ADDING			= BIT(8),
	FTRACE_OPS_FL_REMOVING			= BIT(9),
	FTRACE_OPS_FL_MODIFYING			= BIT(10),
	FTRACE_OPS_FL_ALLOC_TRAMP		= BIT(11),
	FTRACE_OPS_FL_IPMODIFY			= BIT(12),
	FTRACE_OPS_FL_PID			= BIT(13),
	FTRACE_OPS_FL_RCU			= BIT(14),
	FTRACE_OPS_FL_TRACE_ARRAY		= BIT(15),
	FTRACE_OPS_FL_PERMANENT                 = BIT(16),
	FTRACE_OPS_FL_DIRECT			= BIT(17),
};

#ifndef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
#define FTRACE_OPS_FL_SAVE_ARGS                        FTRACE_OPS_FL_SAVE_REGS
#else
#define FTRACE_OPS_FL_SAVE_ARGS                        0
#endif

/*
 * FTRACE_OPS_CMD_* commands allow the ftrace core logic to request changes
 * to a ftrace_ops. Note, the requests may fail.
 *
 * ENABLE_SHARE_IPMODIFY_SELF - enable a DIRECT ops to work on the same
 *                              function as an ops with IPMODIFY. Called
 *                              when the DIRECT ops is being registered.
 *                              This is called with both direct_mutex and
 *                              ftrace_lock are locked.
 *
 * ENABLE_SHARE_IPMODIFY_PEER - enable a DIRECT ops to work on the same
 *                              function as an ops with IPMODIFY. Called
 *                              when the other ops (the one with IPMODIFY)
 *                              is being registered.
 *                              This is called with direct_mutex locked.
 *
 * DISABLE_SHARE_IPMODIFY_PEER - disable a DIRECT ops to work on the same
 *                               function as an ops with IPMODIFY. Called
 *                               when the other ops (the one with IPMODIFY)
 *                               is being unregistered.
 *                               This is called with direct_mutex locked.
 */
enum ftrace_ops_cmd {
	FTRACE_OPS_CMD_ENABLE_SHARE_IPMODIFY_SELF,
	FTRACE_OPS_CMD_ENABLE_SHARE_IPMODIFY_PEER,
	FTRACE_OPS_CMD_DISABLE_SHARE_IPMODIFY_PEER,
};

/*
 * For most ftrace_ops_cmd,
 * Returns:
 *        0 - Success.
 *        Negative on failure. The return value is dependent on the
 *        callback.
 */
typedef int (*ftrace_ops_func_t)(struct ftrace_ops *op, enum ftrace_ops_cmd cmd);

#ifdef CONFIG_DYNAMIC_FTRACE
/* The hash used to know what functions callbacks trace */
struct ftrace_ops_hash {
	struct ftrace_hash __rcu	*notrace_hash;
	struct ftrace_hash __rcu	*filter_hash;
	struct mutex			regex_lock;
};

void ftrace_free_init_mem(void);
void ftrace_free_mem(struct module *mod, void *start, void *end);
#else
static inline void ftrace_free_init_mem(void)
{
	ftrace_boot_snapshot();
}
static inline void ftrace_free_mem(struct module *mod, void *start, void *end) { }
#endif

/*
 * Note, ftrace_ops can be referenced outside of RCU protection, unless
 * the RCU flag is set. If ftrace_ops is allocated and not part of kernel
 * core data, the unregistering of it will perform a scheduling on all CPUs
 * to make sure that there are no more users. Depending on the load of the
 * system that may take a bit of time.
 *
 * Any private data added must also take care not to be freed and if private
 * data is added to a ftrace_ops that is in core code, the user of the
 * ftrace_ops must perform a schedule_on_each_cpu() before freeing it.
 */
struct ftrace_ops {
	ftrace_func_t			func;
	struct ftrace_ops __rcu		*next;
	unsigned long			flags;
	void				*private;
	ftrace_func_t			saved_func;
#ifdef CONFIG_DYNAMIC_FTRACE
	struct ftrace_ops_hash		local_hash;
	struct ftrace_ops_hash		*func_hash;
	struct ftrace_ops_hash		old_hash;
	unsigned long			trampoline;
	unsigned long			trampoline_size;
	struct list_head		list;
	ftrace_ops_func_t		ops_func;
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
	unsigned long			direct_call;
#endif
#endif
};

extern struct ftrace_ops __rcu *ftrace_ops_list;
extern struct ftrace_ops ftrace_list_end;

/*
 * Traverse the ftrace_ops_list, invoking all entries.  The reason that we
 * can use rcu_dereference_raw_check() is that elements removed from this list
 * are simply leaked, so there is no need to interact with a grace-period
 * mechanism.  The rcu_dereference_raw_check() calls are needed to handle
 * concurrent insertions into the ftrace_ops_list.
 *
 * Silly Alpha and silly pointer-speculation compiler optimizations!
 */
#define do_for_each_ftrace_op(op, list)			\
	op = rcu_dereference_raw_check(list);			\
	do

/*
 * Optimized for just a single item in the list (as that is the normal case).
 */
#define while_for_each_ftrace_op(op)				\
	while (likely(op = rcu_dereference_raw_check((op)->next)) &&	\
	       unlikely((op) != &ftrace_list_end))

/*
 * Type of the current tracing.
 */
enum ftrace_tracing_type_t {
	FTRACE_TYPE_ENTER = 0, /* Hook the call of the function */
	FTRACE_TYPE_RETURN,	/* Hook the return of the function */
};

/* Current tracing type, default is FTRACE_TYPE_ENTER */
extern enum ftrace_tracing_type_t ftrace_tracing_type;

/*
 * The ftrace_ops must be a static and should also
 * be read_mostly.  These functions do modify read_mostly variables
 * so use them sparely. Never free an ftrace_op or modify the
 * next pointer after it has been registered. Even after unregistering
 * it, the next pointer may still be used internally.
 */
int register_ftrace_function(struct ftrace_ops *ops);
int unregister_ftrace_function(struct ftrace_ops *ops);

extern void ftrace_stub(unsigned long a0, unsigned long a1,
			struct ftrace_ops *op, struct ftrace_regs *fregs);


int ftrace_lookup_symbols(const char **sorted_syms, size_t cnt, unsigned long *addrs);
#else /* !CONFIG_FUNCTION_TRACER */
/*
 * (un)register_ftrace_function must be a macro since the ops parameter
 * must not be evaluated.
 */
#define register_ftrace_function(ops) ({ 0; })
#define unregister_ftrace_function(ops) ({ 0; })
static inline void ftrace_kill(void) { }
static inline void ftrace_free_init_mem(void) { }
static inline void ftrace_free_mem(struct module *mod, void *start, void *end) { }
static inline int ftrace_lookup_symbols(const char **sorted_syms, size_t cnt, unsigned long *addrs)
{
	return -EOPNOTSUPP;
}
#endif /* CONFIG_FUNCTION_TRACER */

struct ftrace_func_entry {
	struct hlist_node hlist;
	unsigned long ip;
	unsigned long direct; /* for direct lookup only */
};

#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
extern int ftrace_direct_func_count;
unsigned long ftrace_find_rec_direct(unsigned long ip);
int register_ftrace_direct(struct ftrace_ops *ops, unsigned long addr);
int unregister_ftrace_direct(struct ftrace_ops *ops, unsigned long addr,
			     bool free_filters);
int modify_ftrace_direct(struct ftrace_ops *ops, unsigned long addr);
int modify_ftrace_direct_nolock(struct ftrace_ops *ops, unsigned long addr);

void ftrace_stub_direct_tramp(void);

#else
struct ftrace_ops;
# define ftrace_direct_func_count 0
static inline unsigned long ftrace_find_rec_direct(unsigned long ip)
{
	return 0;
}
static inline int register_ftrace_direct(struct ftrace_ops *ops, unsigned long addr)
{
	return -ENODEV;
}
static inline int unregister_ftrace_direct(struct ftrace_ops *ops, unsigned long addr,
					   bool free_filters)
{
	return -ENODEV;
}
static inline int modify_ftrace_direct(struct ftrace_ops *ops, unsigned long addr)
{
	return -ENODEV;
}
static inline int modify_ftrace_direct_nolock(struct ftrace_ops *ops, unsigned long addr)
{
	return -ENODEV;
}

/*
 * This must be implemented by the architecture.
 * It is the way the ftrace direct_ops helper, when called
 * via ftrace (because there's other callbacks besides the
 * direct call), can inform the architecture's trampoline that this
 * routine has a direct caller, and what the caller is.
 *
 * For example, in x86, it returns the direct caller
 * callback function via the regs->orig_ax parameter.
 * Then in the ftrace trampoline, if this is set, it makes
 * the return from the trampoline jump to the direct caller
 * instead of going back to the function it just traced.
 */
static inline void arch_ftrace_set_direct_caller(struct ftrace_regs *fregs,
						 unsigned long addr) { }
#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */

#ifdef CONFIG_STACK_TRACER

extern int stack_tracer_enabled;

int stack_trace_sysctl(struct ctl_table *table, int write, void *buffer,
		       size_t *lenp, loff_t *ppos);

/* DO NOT MODIFY THIS VARIABLE DIRECTLY! */
DECLARE_PER_CPU(int, disable_stack_tracer);

/**
 * stack_tracer_disable - temporarily disable the stack tracer
 *
 * There's a few locations (namely in RCU) where stack tracing
 * cannot be executed. This function is used to disable stack
 * tracing during those critical sections.
 *
 * This function must be called with preemption or interrupts
 * disabled and stack_tracer_enable() must be called shortly after
 * while preemption or interrupts are still disabled.
 */
static inline void stack_tracer_disable(void)
{
	/* Preemption or interrupts must be disabled */
	if (IS_ENABLED(CONFIG_DEBUG_PREEMPT))
		WARN_ON_ONCE(!preempt_count() || !irqs_disabled());
	this_cpu_inc(disable_stack_tracer);
}

/**
 * stack_tracer_enable - re-enable the stack tracer
 *
 * After stack_tracer_disable() is called, stack_tracer_enable()
 * must be called shortly afterward.
 */
static inline void stack_tracer_enable(void)
{
	if (IS_ENABLED(CONFIG_DEBUG_PREEMPT))
		WARN_ON_ONCE(!preempt_count() || !irqs_disabled());
	this_cpu_dec(disable_stack_tracer);
}
#else
static inline void stack_tracer_disable(void) { }
static inline void stack_tracer_enable(void) { }
#endif

#ifdef CONFIG_DYNAMIC_FTRACE

void ftrace_arch_code_modify_prepare(void);
void ftrace_arch_code_modify_post_process(void);

enum ftrace_bug_type {
	FTRACE_BUG_UNKNOWN,
	FTRACE_BUG_INIT,
	FTRACE_BUG_NOP,
	FTRACE_BUG_CALL,
	FTRACE_BUG_UPDATE,
};
extern enum ftrace_bug_type ftrace_bug_type;

/*
 * Archs can set this to point to a variable that holds the value that was
 * expected at the call site before calling ftrace_bug().
 */
extern const void *ftrace_expected;

void ftrace_bug(int err, struct dyn_ftrace *rec);

struct seq_file;

extern int ftrace_text_reserved(const void *start, const void *end);

struct ftrace_ops *ftrace_ops_trampoline(unsigned long addr);

bool is_ftrace_trampoline(unsigned long addr);

/*
 * The dyn_ftrace record's flags field is split into two parts.
 * the first part which is '0-FTRACE_REF_MAX' is a counter of
 * the number of callbacks that have registered the function that
 * the dyn_ftrace descriptor represents.
 *
 * The second part is a mask:
 *  ENABLED - the function is being traced
 *  REGS    - the record wants the function to save regs
 *  REGS_EN - the function is set up to save regs.
 *  IPMODIFY - the record allows for the IP address to be changed.
 *  DISABLED - the record is not ready to be touched yet
 *  DIRECT   - there is a direct function to call
 *  CALL_OPS - the record can use callsite-specific ops
 *  CALL_OPS_EN - the function is set up to use callsite-specific ops
 *  TOUCHED  - A callback was added since boot up
 *  MODIFIED - The function had IPMODIFY or DIRECT attached to it
 *
 * When a new ftrace_ops is registered and wants a function to save
 * pt_regs, the rec->flags REGS is set. When the function has been
 * set up to save regs, the REG_EN flag is set. Once a function
 * starts saving regs it will do so until all ftrace_ops are removed
 * from tracing that function.
 */
enum {
	FTRACE_FL_ENABLED	= (1UL << 31),
	FTRACE_FL_REGS		= (1UL << 30),
	FTRACE_FL_REGS_EN	= (1UL << 29),
	FTRACE_FL_TRAMP		= (1UL << 28),
	FTRACE_FL_TRAMP_EN	= (1UL << 27),
	FTRACE_FL_IPMODIFY	= (1UL << 26),
	FTRACE_FL_DISABLED	= (1UL << 25),
	FTRACE_FL_DIRECT	= (1UL << 24),
	FTRACE_FL_DIRECT_EN	= (1UL << 23),
	FTRACE_FL_CALL_OPS	= (1UL << 22),
	FTRACE_FL_CALL_OPS_EN	= (1UL << 21),
	FTRACE_FL_TOUCHED	= (1UL << 20),
	FTRACE_FL_MODIFIED	= (1UL << 19),
};

#define FTRACE_REF_MAX_SHIFT	19
#define FTRACE_REF_MAX		((1UL << FTRACE_REF_MAX_SHIFT) - 1)

#define ftrace_rec_count(rec)	((rec)->flags & FTRACE_REF_MAX)

struct dyn_ftrace {
	unsigned long		ip; /* address of mcount call-site */
	unsigned long		flags;
	struct dyn_arch_ftrace	arch;
};

int ftrace_set_filter_ip(struct ftrace_ops *ops, unsigned long ip,
			 int remove, int reset);
int ftrace_set_filter_ips(struct ftrace_ops *ops, unsigned long *ips,
			  unsigned int cnt, int remove, int reset);
int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
		       int len, int reset);
int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
			int len, int reset);
void ftrace_set_global_filter(unsigned char *buf, int len, int reset);
void ftrace_set_global_notrace(unsigned char *buf, int len, int reset);
void ftrace_free_filter(struct ftrace_ops *ops);
void ftrace_ops_set_global_filter(struct ftrace_ops *ops);

enum {
	FTRACE_UPDATE_CALLS		= (1 << 0),
	FTRACE_DISABLE_CALLS		= (1 << 1),
	FTRACE_UPDATE_TRACE_FUNC	= (1 << 2),
	FTRACE_START_FUNC_RET		= (1 << 3),
	FTRACE_STOP_FUNC_RET		= (1 << 4),
	FTRACE_MAY_SLEEP		= (1 << 5),
};

/*
 * The FTRACE_UPDATE_* enum is used to pass information back
 * from the ftrace_update_record() and ftrace_test_record()
 * functions. These are called by the code update routines
 * to find out what is to be done for a given function.
 *
 *  IGNORE           - The function is already what we want it to be
 *  MAKE_CALL        - Start tracing the function
 *  MODIFY_CALL      - Stop saving regs for the function
 *  MAKE_NOP         - Stop tracing the function
 */
enum {
	FTRACE_UPDATE_IGNORE,
	FTRACE_UPDATE_MAKE_CALL,
	FTRACE_UPDATE_MODIFY_CALL,
	FTRACE_UPDATE_MAKE_NOP,
};

enum {
	FTRACE_ITER_FILTER	= (1 << 0),
	FTRACE_ITER_NOTRACE	= (1 << 1),
	FTRACE_ITER_PRINTALL	= (1 << 2),
	FTRACE_ITER_DO_PROBES	= (1 << 3),
	FTRACE_ITER_PROBE	= (1 << 4),
	FTRACE_ITER_MOD		= (1 << 5),
	FTRACE_ITER_ENABLED	= (1 << 6),
	FTRACE_ITER_TOUCHED	= (1 << 7),
	FTRACE_ITER_ADDRS	= (1 << 8),
};

void arch_ftrace_update_code(int command);
void arch_ftrace_update_trampoline(struct ftrace_ops *ops);
void *arch_ftrace_trampoline_func(struct ftrace_ops *ops, struct dyn_ftrace *rec);
void arch_ftrace_trampoline_free(struct ftrace_ops *ops);

struct ftrace_rec_iter;

struct ftrace_rec_iter *ftrace_rec_iter_start(void);
struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter);
struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter);

#define for_ftrace_rec_iter(iter)		\
	for (iter = ftrace_rec_iter_start();	\
	     iter;				\
	     iter = ftrace_rec_iter_next(iter))


int ftrace_update_record(struct dyn_ftrace *rec, bool enable);
int ftrace_test_record(struct dyn_ftrace *rec, bool enable);
void ftrace_run_stop_machine(int command);
unsigned long ftrace_location(unsigned long ip);
unsigned long ftrace_location_range(unsigned long start, unsigned long end);
unsigned long ftrace_get_addr_new(struct dyn_ftrace *rec);
unsigned long ftrace_get_addr_curr(struct dyn_ftrace *rec);

extern ftrace_func_t ftrace_trace_function;

int ftrace_regex_open(struct ftrace_ops *ops, int flag,
		  struct inode *inode, struct file *file);
ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
			    size_t cnt, loff_t *ppos);
ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
			     size_t cnt, loff_t *ppos);
int ftrace_regex_release(struct inode *inode, struct file *file);

void __init
ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable);

/* defined in arch */
extern int ftrace_dyn_arch_init(void);
extern void ftrace_replace_code(int enable);
extern int ftrace_update_ftrace_func(ftrace_func_t func);
extern void ftrace_caller(void);
extern void ftrace_regs_caller(void);
extern void ftrace_call(void);
extern void ftrace_regs_call(void);
extern void mcount_call(void);

void ftrace_modify_all_code(int command);

#ifndef FTRACE_ADDR
#define FTRACE_ADDR ((unsigned long)ftrace_caller)
#endif

#ifndef FTRACE_GRAPH_ADDR
#define FTRACE_GRAPH_ADDR ((unsigned long)ftrace_graph_caller)
#endif

#ifndef FTRACE_REGS_ADDR
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
# define FTRACE_REGS_ADDR ((unsigned long)ftrace_regs_caller)
#else
# define FTRACE_REGS_ADDR FTRACE_ADDR
#endif
#endif

/*
 * If an arch would like functions that are only traced
 * by the function graph tracer to jump directly to its own
 * trampoline, then they can define FTRACE_GRAPH_TRAMP_ADDR
 * to be that address to jump to.
 */
#ifndef FTRACE_GRAPH_TRAMP_ADDR
#define FTRACE_GRAPH_TRAMP_ADDR ((unsigned long) 0)
#endif

#ifdef CONFIG_FUNCTION_GRAPH_TRACER
extern void ftrace_graph_caller(void);
extern int ftrace_enable_ftrace_graph_caller(void);
extern int ftrace_disable_ftrace_graph_caller(void);
#else
static inline int ftrace_enable_ftrace_graph_caller(void) { return 0; }
static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
#endif

/**
 * ftrace_make_nop - convert code into nop
 * @mod: module structure if called by module load initialization
 * @rec: the call site record (e.g. mcount/fentry)
 * @addr: the address that the call site should be calling
 *
 * This is a very sensitive operation and great care needs
 * to be taken by the arch.  The operation should carefully
 * read the location, check to see if what is read is indeed
 * what we expect it to be, and then on success of the compare,
 * it should write to the location.
 *
 * The code segment at @rec->ip should be a caller to @addr
 *
 * Return must be:
 *  0 on success
 *  -EFAULT on error reading the location
 *  -EINVAL on a failed compare of the contents
 *  -EPERM  on error writing to the location
 * Any other value will be considered a failure.
 */
extern int ftrace_make_nop(struct module *mod,
			   struct dyn_ftrace *rec, unsigned long addr);

/**
 * ftrace_need_init_nop - return whether nop call sites should be initialized
 *
 * Normally the compiler's -mnop-mcount generates suitable nops, so we don't
 * need to call ftrace_init_nop() if the code is built with that flag.
 * Architectures where this is not always the case may define their own
 * condition.
 *
 * Return must be:
 *  0	    if ftrace_init_nop() should be called
 *  Nonzero if ftrace_init_nop() should not be called
 */

#ifndef ftrace_need_init_nop
#define ftrace_need_init_nop() (!__is_defined(CC_USING_NOP_MCOUNT))
#endif

/**
 * ftrace_init_nop - initialize a nop call site
 * @mod: module structure if called by module load initialization
 * @rec: the call site record (e.g. mcount/fentry)
 *
 * This is a very sensitive operation and great care needs
 * to be taken by the arch.  The operation should carefully
 * read the location, check to see if what is read is indeed
 * what we expect it to be, and then on success of the compare,
 * it should write to the location.
 *
 * The code segment at @rec->ip should contain the contents created by
 * the compiler
 *
 * Return must be:
 *  0 on success
 *  -EFAULT on error reading the location
 *  -EINVAL on a failed compare of the contents
 *  -EPERM  on error writing to the location
 * Any other value will be considered a failure.
 */
#ifndef ftrace_init_nop
static inline int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec)
{
	return ftrace_make_nop(mod, rec, MCOUNT_ADDR);
}
#endif

/**
 * ftrace_make_call - convert a nop call site into a call to addr
 * @rec: the call site record (e.g. mcount/fentry)
 * @addr: the address that the call site should call
 *
 * This is a very sensitive operation and great care needs
 * to be taken by the arch.  The operation should carefully
 * read the location, check to see if what is read is indeed
 * what we expect it to be, and then on success of the compare,
 * it should write to the location.
 *
 * The code segment at @rec->ip should be a nop
 *
 * Return must be:
 *  0 on success
 *  -EFAULT on error reading the location
 *  -EINVAL on a failed compare of the contents
 *  -EPERM  on error writing to the location
 * Any other value will be considered a failure.
 */
extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);

#if defined(CONFIG_DYNAMIC_FTRACE_WITH_REGS) || \
	defined(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS)
/**
 * ftrace_modify_call - convert from one addr to another (no nop)
 * @rec: the call site record (e.g. mcount/fentry)
 * @old_addr: the address expected to be currently called to
 * @addr: the address to change to
 *
 * This is a very sensitive operation and great care needs
 * to be taken by the arch.  The operation should carefully
 * read the location, check to see if what is read is indeed
 * what we expect it to be, and then on success of the compare,
 * it should write to the location.
 *
 * When using call ops, this is called when the associated ops change, even
 * when (addr == old_addr).
 *
 * The code segment at @rec->ip should be a caller to @old_addr
 *
 * Return must be:
 *  0 on success
 *  -EFAULT on error reading the location
 *  -EINVAL on a failed compare of the contents
 *  -EPERM  on error writing to the location
 * Any other value will be considered a failure.
 */
extern int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
			      unsigned long addr);
#else
/* Should never be called */
static inline int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
				     unsigned long addr)
{
	return -EINVAL;
}
#endif

extern int skip_trace(unsigned long ip);
extern void ftrace_module_init(struct module *mod);
extern void ftrace_module_enable(struct module *mod);
extern void ftrace_release_mod(struct module *mod);
#else /* CONFIG_DYNAMIC_FTRACE */
static inline int skip_trace(unsigned long ip) { return 0; }
static inline void ftrace_module_init(struct module *mod) { }
static inline void ftrace_module_enable(struct module *mod) { }
static inline void ftrace_release_mod(struct module *mod) { }
static inline int ftrace_text_reserved(const void *start, const void *end)
{
	return 0;
}
static inline unsigned long ftrace_location(unsigned long ip)
{
	return 0;
}

/*
 * Again users of functions that have ftrace_ops may not
 * have them defined when ftrace is not enabled, but these
 * functions may still be called. Use a macro instead of inline.
 */
#define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; })
#define ftrace_set_early_filter(ops, buf, enable) do { } while (0)
#define ftrace_set_filter_ip(ops, ip, remove, reset) ({ -ENODEV; })
#define ftrace_set_filter_ips(ops, ips, cnt, remove, reset) ({ -ENODEV; })
#define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; })
#define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; })
#define ftrace_free_filter(ops) do { } while (0)
#define ftrace_ops_set_global_filter(ops) do { } while (0)

static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
			    size_t cnt, loff_t *ppos) { return -ENODEV; }
static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
			     size_t cnt, loff_t *ppos) { return -ENODEV; }
static inline int
ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; }

static inline bool is_ftrace_trampoline(unsigned long addr)
{
	return false;
}
#endif /* CONFIG_DYNAMIC_FTRACE */

#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#ifndef ftrace_graph_func
#define ftrace_graph_func ftrace_stub
#define FTRACE_OPS_GRAPH_STUB FTRACE_OPS_FL_STUB
#else
#define FTRACE_OPS_GRAPH_STUB 0
#endif
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */

/* totally disable ftrace - can not re-enable after this */
void ftrace_kill(void);

static inline void tracer_disable(void)
{
#ifdef CONFIG_FUNCTION_TRACER
	ftrace_enabled = 0;
#endif
}

/*
 * Ftrace disable/restore without lock. Some synchronization mechanism
 * must be used to prevent ftrace_enabled to be changed between
 * disable/restore.
 */
static inline int __ftrace_enabled_save(void)
{
#ifdef CONFIG_FUNCTION_TRACER
	int saved_ftrace_enabled = ftrace_enabled;
	ftrace_enabled = 0;
	return saved_ftrace_enabled;
#else
	return 0;
#endif
}

static inline void __ftrace_enabled_restore(int enabled)
{
#ifdef CONFIG_FUNCTION_TRACER
	ftrace_enabled = enabled;
#endif
}

/* All archs should have this, but we define it for consistency */
#ifndef ftrace_return_address0
# define ftrace_return_address0 __builtin_return_address(0)
#endif

/* Archs may use other ways for ADDR1 and beyond */
#ifndef ftrace_return_address
# ifdef CONFIG_FRAME_POINTER
#  define ftrace_return_address(n) __builtin_return_address(n)
# else
#  define ftrace_return_address(n) 0UL
# endif
#endif

#define CALLER_ADDR0 ((unsigned long)ftrace_return_address0)
#define CALLER_ADDR1 ((unsigned long)ftrace_return_address(1))
#define CALLER_ADDR2 ((unsigned long)ftrace_return_address(2))
#define CALLER_ADDR3 ((unsigned long)ftrace_return_address(3))
#define CALLER_ADDR4 ((unsigned long)ftrace_return_address(4))
#define CALLER_ADDR5 ((unsigned long)ftrace_return_address(5))
#define CALLER_ADDR6 ((unsigned long)ftrace_return_address(6))

static __always_inline unsigned long get_lock_parent_ip(void)
{
	unsigned long addr = CALLER_ADDR0;

	if (!in_lock_functions(addr))
		return addr;
	addr = CALLER_ADDR1;
	if (!in_lock_functions(addr))
		return addr;
	return CALLER_ADDR2;
}

#ifdef CONFIG_TRACE_PREEMPT_TOGGLE
  extern void trace_preempt_on(unsigned long a0, unsigned long a1);
  extern void trace_preempt_off(unsigned long a0, unsigned long a1);
#else
/*
 * Use defines instead of static inlines because some arches will make code out
 * of the CALLER_ADDR, when we really want these to be a real nop.
 */
# define trace_preempt_on(a0, a1) do { } while (0)
# define trace_preempt_off(a0, a1) do { } while (0)
#endif

#ifdef CONFIG_FTRACE_MCOUNT_RECORD
extern void ftrace_init(void);
#ifdef CC_USING_PATCHABLE_FUNCTION_ENTRY
#define FTRACE_CALLSITE_SECTION	"__patchable_function_entries"
#else
#define FTRACE_CALLSITE_SECTION	"__mcount_loc"
#endif
#else
static inline void ftrace_init(void) { }
#endif

/*
 * Structure that defines an entry function trace.
 * It's already packed but the attribute "packed" is needed
 * to remove extra padding at the end.
 */
struct ftrace_graph_ent {
	unsigned long func; /* Current function */
	int depth;
} __packed;

/*
 * Structure that defines a return function trace.
 * It's already packed but the attribute "packed" is needed
 * to remove extra padding at the end.
 */
struct ftrace_graph_ret {
	unsigned long func; /* Current function */
#ifdef CONFIG_FUNCTION_GRAPH_RETVAL
	unsigned long retval;
#endif
	int depth;
	/* Number of functions that overran the depth limit for current task */
	unsigned int overrun;
	unsigned long long calltime;
	unsigned long long rettime;
} __packed;

/* Type of the callback handlers for tracing function graph*/
typedef void (*trace_func_graph_ret_t)(struct ftrace_graph_ret *); /* return */
typedef int (*trace_func_graph_ent_t)(struct ftrace_graph_ent *); /* entry */

extern int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace);

#ifdef CONFIG_FUNCTION_GRAPH_TRACER

struct fgraph_ops {
	trace_func_graph_ent_t		entryfunc;
	trace_func_graph_ret_t		retfunc;
};

/*
 * Stack of return addresses for functions
 * of a thread.
 * Used in struct thread_info
 */
struct ftrace_ret_stack {
	unsigned long ret;
	unsigned long func;
	unsigned long long calltime;
#ifdef CONFIG_FUNCTION_PROFILER
	unsigned long long subtime;
#endif
#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
	unsigned long fp;
#endif
#ifdef HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
	unsigned long *retp;
#endif
};

/*
 * Primary handler of a function return.
 * It relays on ftrace_return_to_handler.
 * Defined in entry_32/64.S
 */
extern void return_to_handler(void);

extern int
function_graph_enter(unsigned long ret, unsigned long func,
		     unsigned long frame_pointer, unsigned long *retp);

struct ftrace_ret_stack *
ftrace_graph_get_ret_stack(struct task_struct *task, int idx);

unsigned long ftrace_graph_ret_addr(struct task_struct *task, int *idx,
				    unsigned long ret, unsigned long *retp);

/*
 * Sometimes we don't want to trace a function with the function
 * graph tracer but we want them to keep traced by the usual function
 * tracer if the function graph tracer is not configured.
 */
#define __notrace_funcgraph		notrace

#define FTRACE_RETFUNC_DEPTH 50
#define FTRACE_RETSTACK_ALLOC_SIZE 32

extern int register_ftrace_graph(struct fgraph_ops *ops);
extern void unregister_ftrace_graph(struct fgraph_ops *ops);

/**
 * ftrace_graph_is_dead - returns true if ftrace_graph_stop() was called
 *
 * ftrace_graph_stop() is called when a severe error is detected in
 * the function graph tracing. This function is called by the critical
 * paths of function graph to keep those paths from doing any more harm.
 */
DECLARE_STATIC_KEY_FALSE(kill_ftrace_graph);

static inline bool ftrace_graph_is_dead(void)
{
	return static_branch_unlikely(&kill_ftrace_graph);
}

extern void ftrace_graph_stop(void);

/* The current handlers in use */
extern trace_func_graph_ret_t ftrace_graph_return;
extern trace_func_graph_ent_t ftrace_graph_entry;

extern void ftrace_graph_init_task(struct task_struct *t);
extern void ftrace_graph_exit_task(struct task_struct *t);
extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu);

static inline void pause_graph_tracing(void)
{
	atomic_inc(&current->tracing_graph_pause);
}

static inline void unpause_graph_tracing(void)
{
	atomic_dec(&current->tracing_graph_pause);
}
#else /* !CONFIG_FUNCTION_GRAPH_TRACER */

#define __notrace_funcgraph

static inline void ftrace_graph_init_task(struct task_struct *t) { }
static inline void ftrace_graph_exit_task(struct task_struct *t) { }
static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { }

/* Define as macros as fgraph_ops may not be defined */
#define register_ftrace_graph(ops) ({ -1; })
#define unregister_ftrace_graph(ops) do { } while (0)

static inline unsigned long
ftrace_graph_ret_addr(struct task_struct *task, int *idx, unsigned long ret,
		      unsigned long *retp)
{
	return ret;
}

static inline void pause_graph_tracing(void) { }
static inline void unpause_graph_tracing(void) { }
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */

#ifdef CONFIG_TRACING
enum ftrace_dump_mode;

extern enum ftrace_dump_mode ftrace_dump_on_oops;
extern int tracepoint_printk;

extern void disable_trace_on_warning(void);
extern int __disable_trace_on_warning;

int tracepoint_printk_sysctl(struct ctl_table *table, int write,
			     void *buffer, size_t *lenp, loff_t *ppos);

#else /* CONFIG_TRACING */
static inline void  disable_trace_on_warning(void) { }
#endif /* CONFIG_TRACING */

#ifdef CONFIG_FTRACE_SYSCALLS

unsigned long arch_syscall_addr(int nr);

#endif /* CONFIG_FTRACE_SYSCALLS */

#endif /* _LINUX_FTRACE_H */