/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* Copyright (c) 2021-2022, NVIDIA CORPORATION & AFFILIATES. */ #ifndef _UAPI_IOMMUFD_H #define _UAPI_IOMMUFD_H #include <linux/types.h> #include <linux/ioctl.h> #define IOMMUFD_TYPE (';') /** * DOC: General ioctl format * * The ioctl interface follows a general format to allow for extensibility. Each * ioctl is passed in a structure pointer as the argument providing the size of * the structure in the first u32. The kernel checks that any structure space * beyond what it understands is 0. This allows userspace to use the backward * compatible portion while consistently using the newer, larger, structures. * * ioctls use a standard meaning for common errnos: * * - ENOTTY: The IOCTL number itself is not supported at all * - E2BIG: The IOCTL number is supported, but the provided structure has * non-zero in a part the kernel does not understand. * - EOPNOTSUPP: The IOCTL number is supported, and the structure is * understood, however a known field has a value the kernel does not * understand or support. * - EINVAL: Everything about the IOCTL was understood, but a field is not * correct. * - ENOENT: An ID or IOVA provided does not exist. * - ENOMEM: Out of memory. * - EOVERFLOW: Mathematics overflowed. * * As well as additional errnos, within specific ioctls. */ enum { IOMMUFD_CMD_BASE = 0x80, IOMMUFD_CMD_DESTROY = IOMMUFD_CMD_BASE, IOMMUFD_CMD_IOAS_ALLOC, IOMMUFD_CMD_IOAS_ALLOW_IOVAS, IOMMUFD_CMD_IOAS_COPY, IOMMUFD_CMD_IOAS_IOVA_RANGES, IOMMUFD_CMD_IOAS_MAP, IOMMUFD_CMD_IOAS_UNMAP, IOMMUFD_CMD_OPTION, IOMMUFD_CMD_VFIO_IOAS, IOMMUFD_CMD_HWPT_ALLOC, IOMMUFD_CMD_GET_HW_INFO, }; /** * struct iommu_destroy - ioctl(IOMMU_DESTROY) * @size: sizeof(struct iommu_destroy) * @id: iommufd object ID to destroy. Can be any destroyable object type. * * Destroy any object held within iommufd. */ struct iommu_destroy { __u32 size; __u32 id; }; #define IOMMU_DESTROY _IO(IOMMUFD_TYPE, IOMMUFD_CMD_DESTROY) /** * struct iommu_ioas_alloc - ioctl(IOMMU_IOAS_ALLOC) * @size: sizeof(struct iommu_ioas_alloc) * @flags: Must be 0 * @out_ioas_id: Output IOAS ID for the allocated object * * Allocate an IO Address Space (IOAS) which holds an IO Virtual Address (IOVA) * to memory mapping. */ struct iommu_ioas_alloc { __u32 size; __u32 flags; __u32 out_ioas_id; }; #define IOMMU_IOAS_ALLOC _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_ALLOC) /** * struct iommu_iova_range - ioctl(IOMMU_IOVA_RANGE) * @start: First IOVA * @last: Inclusive last IOVA * * An interval in IOVA space. */ struct iommu_iova_range { __aligned_u64 start; __aligned_u64 last; }; /** * struct iommu_ioas_iova_ranges - ioctl(IOMMU_IOAS_IOVA_RANGES) * @size: sizeof(struct iommu_ioas_iova_ranges) * @ioas_id: IOAS ID to read ranges from * @num_iovas: Input/Output total number of ranges in the IOAS * @__reserved: Must be 0 * @allowed_iovas: Pointer to the output array of struct iommu_iova_range * @out_iova_alignment: Minimum alignment required for mapping IOVA * * Query an IOAS for ranges of allowed IOVAs. Mapping IOVA outside these ranges * is not allowed. num_iovas will be set to the total number of iovas and * the allowed_iovas[] will be filled in as space permits. * * The allowed ranges are dependent on the HW path the DMA operation takes, and * can change during the lifetime of the IOAS. A fresh empty IOAS will have a * full range, and each attached device will narrow the ranges based on that * device's HW restrictions. Detaching a device can widen the ranges. Userspace * should query ranges after every attach/detach to know what IOVAs are valid * for mapping. * * On input num_iovas is the length of the allowed_iovas array. On output it is * the total number of iovas filled in. The ioctl will return -EMSGSIZE and set * num_iovas to the required value if num_iovas is too small. In this case the * caller should allocate a larger output array and re-issue the ioctl. * * out_iova_alignment returns the minimum IOVA alignment that can be given * to IOMMU_IOAS_MAP/COPY. IOVA's must satisfy:: * * starting_iova % out_iova_alignment == 0 * (starting_iova + length) % out_iova_alignment == 0 * * out_iova_alignment can be 1 indicating any IOVA is allowed. It cannot * be higher than the system PAGE_SIZE. */ struct iommu_ioas_iova_ranges { __u32 size; __u32 ioas_id; __u32 num_iovas; __u32 __reserved; __aligned_u64 allowed_iovas; __aligned_u64 out_iova_alignment; }; #define IOMMU_IOAS_IOVA_RANGES _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_IOVA_RANGES) /** * struct iommu_ioas_allow_iovas - ioctl(IOMMU_IOAS_ALLOW_IOVAS) * @size: sizeof(struct iommu_ioas_allow_iovas) * @ioas_id: IOAS ID to allow IOVAs from * @num_iovas: Input/Output total number of ranges in the IOAS * @__reserved: Must be 0 * @allowed_iovas: Pointer to array of struct iommu_iova_range * * Ensure a range of IOVAs are always available for allocation. If this call * succeeds then IOMMU_IOAS_IOVA_RANGES will never return a list of IOVA ranges * that are narrower than the ranges provided here. This call will fail if * IOMMU_IOAS_IOVA_RANGES is currently narrower than the given ranges. * * When an IOAS is first created the IOVA_RANGES will be maximally sized, and as * devices are attached the IOVA will narrow based on the device restrictions. * When an allowed range is specified any narrowing will be refused, ie device * attachment can fail if the device requires limiting within the allowed range. * * Automatic IOVA allocation is also impacted by this call. MAP will only * allocate within the allowed IOVAs if they are present. * * This call replaces the entire allowed list with the given list. */ struct iommu_ioas_allow_iovas { __u32 size; __u32 ioas_id; __u32 num_iovas; __u32 __reserved; __aligned_u64 allowed_iovas; }; #define IOMMU_IOAS_ALLOW_IOVAS _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_ALLOW_IOVAS) /** * enum iommufd_ioas_map_flags - Flags for map and copy * @IOMMU_IOAS_MAP_FIXED_IOVA: If clear the kernel will compute an appropriate * IOVA to place the mapping at * @IOMMU_IOAS_MAP_WRITEABLE: DMA is allowed to write to this mapping * @IOMMU_IOAS_MAP_READABLE: DMA is allowed to read from this mapping */ enum iommufd_ioas_map_flags { IOMMU_IOAS_MAP_FIXED_IOVA = 1 << 0, IOMMU_IOAS_MAP_WRITEABLE = 1 << 1, IOMMU_IOAS_MAP_READABLE = 1 << 2, }; /** * struct iommu_ioas_map - ioctl(IOMMU_IOAS_MAP) * @size: sizeof(struct iommu_ioas_map) * @flags: Combination of enum iommufd_ioas_map_flags * @ioas_id: IOAS ID to change the mapping of * @__reserved: Must be 0 * @user_va: Userspace pointer to start mapping from * @length: Number of bytes to map * @iova: IOVA the mapping was placed at. If IOMMU_IOAS_MAP_FIXED_IOVA is set * then this must be provided as input. * * Set an IOVA mapping from a user pointer. If FIXED_IOVA is specified then the * mapping will be established at iova, otherwise a suitable location based on * the reserved and allowed lists will be automatically selected and returned in * iova. * * If IOMMU_IOAS_MAP_FIXED_IOVA is specified then the iova range must currently * be unused, existing IOVA cannot be replaced. */ struct iommu_ioas_map { __u32 size; __u32 flags; __u32 ioas_id; __u32 __reserved; __aligned_u64 user_va; __aligned_u64 length; __aligned_u64 iova; }; #define IOMMU_IOAS_MAP _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_MAP) /** * struct iommu_ioas_copy - ioctl(IOMMU_IOAS_COPY) * @size: sizeof(struct iommu_ioas_copy) * @flags: Combination of enum iommufd_ioas_map_flags * @dst_ioas_id: IOAS ID to change the mapping of * @src_ioas_id: IOAS ID to copy from * @length: Number of bytes to copy and map * @dst_iova: IOVA the mapping was placed at. If IOMMU_IOAS_MAP_FIXED_IOVA is * set then this must be provided as input. * @src_iova: IOVA to start the copy * * Copy an already existing mapping from src_ioas_id and establish it in * dst_ioas_id. The src iova/length must exactly match a range used with * IOMMU_IOAS_MAP. * * This may be used to efficiently clone a subset of an IOAS to another, or as a * kind of 'cache' to speed up mapping. Copy has an efficiency advantage over * establishing equivalent new mappings, as internal resources are shared, and * the kernel will pin the user memory only once. */ struct iommu_ioas_copy { __u32 size; __u32 flags; __u32 dst_ioas_id; __u32 src_ioas_id; __aligned_u64 length; __aligned_u64 dst_iova; __aligned_u64 src_iova; }; #define IOMMU_IOAS_COPY _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_COPY) /** * struct iommu_ioas_unmap - ioctl(IOMMU_IOAS_UNMAP) * @size: sizeof(struct iommu_ioas_unmap) * @ioas_id: IOAS ID to change the mapping of * @iova: IOVA to start the unmapping at * @length: Number of bytes to unmap, and return back the bytes unmapped * * Unmap an IOVA range. The iova/length must be a superset of a previously * mapped range used with IOMMU_IOAS_MAP or IOMMU_IOAS_COPY. Splitting or * truncating ranges is not allowed. The values 0 to U64_MAX will unmap * everything. */ struct iommu_ioas_unmap { __u32 size; __u32 ioas_id; __aligned_u64 iova; __aligned_u64 length; }; #define IOMMU_IOAS_UNMAP _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_UNMAP) /** * enum iommufd_option - ioctl(IOMMU_OPTION_RLIMIT_MODE) and * ioctl(IOMMU_OPTION_HUGE_PAGES) * @IOMMU_OPTION_RLIMIT_MODE: * Change how RLIMIT_MEMLOCK accounting works. The caller must have privilege * to invoke this. Value 0 (default) is user based accouting, 1 uses process * based accounting. Global option, object_id must be 0 * @IOMMU_OPTION_HUGE_PAGES: * Value 1 (default) allows contiguous pages to be combined when generating * iommu mappings. Value 0 disables combining, everything is mapped to * PAGE_SIZE. This can be useful for benchmarking. This is a per-IOAS * option, the object_id must be the IOAS ID. */ enum iommufd_option { IOMMU_OPTION_RLIMIT_MODE = 0, IOMMU_OPTION_HUGE_PAGES = 1, }; /** * enum iommufd_option_ops - ioctl(IOMMU_OPTION_OP_SET) and * ioctl(IOMMU_OPTION_OP_GET) * @IOMMU_OPTION_OP_SET: Set the option's value * @IOMMU_OPTION_OP_GET: Get the option's value */ enum iommufd_option_ops { IOMMU_OPTION_OP_SET = 0, IOMMU_OPTION_OP_GET = 1, }; /** * struct iommu_option - iommu option multiplexer * @size: sizeof(struct iommu_option) * @option_id: One of enum iommufd_option * @op: One of enum iommufd_option_ops * @__reserved: Must be 0 * @object_id: ID of the object if required * @val64: Option value to set or value returned on get * * Change a simple option value. This multiplexor allows controlling options * on objects. IOMMU_OPTION_OP_SET will load an option and IOMMU_OPTION_OP_GET * will return the current value. */ struct iommu_option { __u32 size; __u32 option_id; __u16 op; __u16 __reserved; __u32 object_id; __aligned_u64 val64; }; #define IOMMU_OPTION _IO(IOMMUFD_TYPE, IOMMUFD_CMD_OPTION) /** * enum iommufd_vfio_ioas_op - IOMMU_VFIO_IOAS_* ioctls * @IOMMU_VFIO_IOAS_GET: Get the current compatibility IOAS * @IOMMU_VFIO_IOAS_SET: Change the current compatibility IOAS * @IOMMU_VFIO_IOAS_CLEAR: Disable VFIO compatibility */ enum iommufd_vfio_ioas_op { IOMMU_VFIO_IOAS_GET = 0, IOMMU_VFIO_IOAS_SET = 1, IOMMU_VFIO_IOAS_CLEAR = 2, }; /** * struct iommu_vfio_ioas - ioctl(IOMMU_VFIO_IOAS) * @size: sizeof(struct iommu_vfio_ioas) * @ioas_id: For IOMMU_VFIO_IOAS_SET the input IOAS ID to set * For IOMMU_VFIO_IOAS_GET will output the IOAS ID * @op: One of enum iommufd_vfio_ioas_op * @__reserved: Must be 0 * * The VFIO compatibility support uses a single ioas because VFIO APIs do not * support the ID field. Set or Get the IOAS that VFIO compatibility will use. * When VFIO_GROUP_SET_CONTAINER is used on an iommufd it will get the * compatibility ioas, either by taking what is already set, or auto creating * one. From then on VFIO will continue to use that ioas and is not effected by * this ioctl. SET or CLEAR does not destroy any auto-created IOAS. */ struct iommu_vfio_ioas { __u32 size; __u32 ioas_id; __u16 op; __u16 __reserved; }; #define IOMMU_VFIO_IOAS _IO(IOMMUFD_TYPE, IOMMUFD_CMD_VFIO_IOAS) /** * struct iommu_hwpt_alloc - ioctl(IOMMU_HWPT_ALLOC) * @size: sizeof(struct iommu_hwpt_alloc) * @flags: Must be 0 * @dev_id: The device to allocate this HWPT for * @pt_id: The IOAS to connect this HWPT to * @out_hwpt_id: The ID of the new HWPT * @__reserved: Must be 0 * * Explicitly allocate a hardware page table object. This is the same object * type that is returned by iommufd_device_attach() and represents the * underlying iommu driver's iommu_domain kernel object. * * A HWPT will be created with the IOVA mappings from the given IOAS. */ struct iommu_hwpt_alloc { __u32 size; __u32 flags; __u32 dev_id; __u32 pt_id; __u32 out_hwpt_id; __u32 __reserved; }; #define IOMMU_HWPT_ALLOC _IO(IOMMUFD_TYPE, IOMMUFD_CMD_HWPT_ALLOC) /** * struct iommu_hw_info_vtd - Intel VT-d hardware information * * @flags: Must be 0 * @__reserved: Must be 0 * * @cap_reg: Value of Intel VT-d capability register defined in VT-d spec * section 11.4.2 Capability Register. * @ecap_reg: Value of Intel VT-d capability register defined in VT-d spec * section 11.4.3 Extended Capability Register. * * User needs to understand the Intel VT-d specification to decode the * register value. */ struct iommu_hw_info_vtd { __u32 flags; __u32 __reserved; __aligned_u64 cap_reg; __aligned_u64 ecap_reg; }; /** * enum iommu_hw_info_type - IOMMU Hardware Info Types * @IOMMU_HW_INFO_TYPE_NONE: Used by the drivers that do not report hardware * info * @IOMMU_HW_INFO_TYPE_INTEL_VTD: Intel VT-d iommu info type */ enum iommu_hw_info_type { IOMMU_HW_INFO_TYPE_NONE, IOMMU_HW_INFO_TYPE_INTEL_VTD, }; /** * struct iommu_hw_info - ioctl(IOMMU_GET_HW_INFO) * @size: sizeof(struct iommu_hw_info) * @flags: Must be 0 * @dev_id: The device bound to the iommufd * @data_len: Input the length of a user buffer in bytes. Output the length of * data that kernel supports * @data_uptr: User pointer to a user-space buffer used by the kernel to fill * the iommu type specific hardware information data * @out_data_type: Output the iommu hardware info type as defined in the enum * iommu_hw_info_type. * @__reserved: Must be 0 * * Query an iommu type specific hardware information data from an iommu behind * a given device that has been bound to iommufd. This hardware info data will * be used to sync capabilities between the virtual iommu and the physical * iommu, e.g. a nested translation setup needs to check the hardware info, so * a guest stage-1 page table can be compatible with the physical iommu. * * To capture an iommu type specific hardware information data, @data_uptr and * its length @data_len must be provided. Trailing bytes will be zeroed if the * user buffer is larger than the data that kernel has. Otherwise, kernel only * fills the buffer using the given length in @data_len. If the ioctl succeeds, * @data_len will be updated to the length that kernel actually supports, * @out_data_type will be filled to decode the data filled in the buffer * pointed by @data_uptr. Input @data_len == zero is allowed. */ struct iommu_hw_info { __u32 size; __u32 flags; __u32 dev_id; __u32 data_len; __aligned_u64 data_uptr; __u32 out_data_type; __u32 __reserved; }; #define IOMMU_GET_HW_INFO _IO(IOMMUFD_TYPE, IOMMUFD_CMD_GET_HW_INFO) #endif