#include <linux/platform_device.h>
#include "pinctrl-starfive-jhb100.h"
#define PADNUM_SYS0_GPIO_A2 2
#define PADNUM_SYS0_GPIO_A3 3
static const struct jhb100_pin_layout_desc jhb100_sys0_pl_desc[] = {
{ .pin_start = 0, .pin_cnt = 3, .name = "gpio", .gpio_func_sel = 0, },
{ .pin_start = 3, .pin_cnt = 1, .name = "bmcpcierp_pe2rst_out", .gpio_func_sel = 1, },
{ .pin_start = 4, .pin_cnt = 1, .name = "testen", .gpio_func_sel = -1, },
{ .pin_start = 5, .pin_cnt = 1, .name = "syspok_in", .gpio_func_sel = -1, },
{ .pin_start = 6, .pin_cnt = 1, .name = "sysrstn_in", .gpio_func_sel = -1, },
{ .pin_start = 7, .pin_cnt = 1, .name = "perstn0_in", .gpio_func_sel = -1, },
{ .pin_start = 8, .pin_cnt = 1, .name = "perstn1_in", .gpio_func_sel = -1, },
{ .pin_start = 9, .pin_cnt = 1, .name = "aprstn_out", .gpio_func_sel = -1, },
{ .pin_start = 10, .pin_cnt = 1, .name = "pcierp_wake", .gpio_func_sel = -1, },
{ 0xff },
};
static const struct config_reg_layout_desc jhb100_sys0_pinctrl_crl_desc[] = {
{
.pin_start = 0,
.pin_cnt = 4,
.fields[PAD_CFG_DRIVE_STRENGTH_2BIT] = { .shift = 0, .width = 2 },
.fields[PAD_CFG_INPUT_ENABLE] = { .shift = 2, .width = 1 },
.fields[PAD_CFG_PULL_DOWN] = { .shift = 3, .width = 1 },
.fields[PAD_CFG_PULL_UP] = { .shift = 4, .width = 1 },
.fields[PAD_CFG_SLEW_RATE] = { .shift = 5, .width = 1 },
.fields[PAD_CFG_SCHMITT_TRIGGER_SELECT] = { .shift = 6, .width = 1 },
.fields[PAD_CFG_DEBOUNCE_WIDTH] = { .shift = 15, .width = 17 },
},
{
.pin_start = 4,
.pin_cnt = 5,
.fields[PAD_CFG_SCHMITT_TRIGGER_SELECT] = { .shift = 0, .width = 1 },
},
{
.pin_start = 9,
.pin_cnt = 1,
.fields[PAD_CFG_DRIVE_STRENGTH_2BIT] = { .shift = 0, .width = 2 },
.fields[PAD_CFG_SLEW_RATE] = { .shift = 2, .width = 1 },
},
{
.pin_start = 10,
.pin_cnt = 1,
.fields[PAD_CFG_DRIVE_STRENGTH_2BIT] = { .shift = 0, .width = 2 },
.fields[PAD_CFG_INPUT_ENABLE] = { .shift = 2, .width = 1 },
.fields[PAD_CFG_PULL_DOWN] = { .shift = 3, .width = 1 },
.fields[PAD_CFG_PULL_UP] = { .shift = 4, .width = 1 },
.fields[PAD_CFG_SLEW_RATE] = { .shift = 5, .width = 1 },
.fields[PAD_CFG_SCHMITT_TRIGGER_SELECT] = { .shift = 6, .width = 1 },
},
{ 0xff },
};
static const struct starfive_pinctrl_regs jhb100_sys0_pinctrl_regs = {
.func_sel = { .reg = 0x44, .width_per_pin = 2 },
.config = 0x0c,
.output = 0x38,
.output_en = 0x3c,
.gpio_status = 0x40,
.irq_en = 0x48,
.irq_status = 0x4c,
.irq_clr = 0x50,
.irq_trigger = 0x54,
.irq_level = 0x58,
.irq_both_edge = 0x5c,
.irq_edge = 0x60,
};
static const struct jhb100_pinctrl_func_maps jhb100_func_maps_sys0[] = {
{ .func = "auxpwrgood", .val = 1 },
{ .func = "gpio", .val = 0,
.max_pin = JHB100_FUNC_MAPS_MAX_PIN(PADNUM_SYS0_GPIO_A2) },
{ .func = "gpio", .val = 1,
.max_pin = JHB100_FUNC_MAPS_MAX_PIN(PADNUM_SYS0_GPIO_A3) },
{ .func = "hbled", .val = 1 },
{ .func = "pe2rst_out", .val = 0 },
};
static const struct jhb100_pinctrl_domain_info jhb100_sys0_pinctrl_info = {
.name = "jhb100-sys0",
.pl_desc = jhb100_sys0_pl_desc,
.crl_desc = jhb100_sys0_pinctrl_crl_desc,
.regs = &jhb100_sys0_pinctrl_regs,
.fmaps = jhb100_func_maps_sys0,
.num_maps = ARRAY_SIZE(jhb100_func_maps_sys0),
};
static const struct of_device_id jhb100_sys0_pinctrl_of_match[] = {
{
.compatible = "starfive,jhb100-sys0-pinctrl",
.data = &jhb100_sys0_pinctrl_info,
},
{ }
};
MODULE_DEVICE_TABLE(of, jhb100_sys0_pinctrl_of_match);
static struct platform_driver jhb100_sys0_pinctrl_driver = {
.probe = jhb100_pinctrl_probe,
.driver = {
.name = "starfive-jhb100-sys0-pinctrl",
.of_match_table = jhb100_sys0_pinctrl_of_match,
},
};
module_platform_driver(jhb100_sys0_pinctrl_driver);
MODULE_DESCRIPTION("Pinctrl driver for StarFive JHB100 SoC System-0 domain");
MODULE_AUTHOR("Alex Soo <yuklin.soo@starfivetech.com>");
MODULE_LICENSE("GPL"