// SPDX-License-Identifier: GPL-2.0-only

#include <linux/bits.h>
#include <linux/bitfield.h>
#include <linux/cleanup.h>
#include <linux/bug.h>
#include <linux/container_of.h>
#include <linux/dev_printk.h>
#include <linux/dpll.h>
#include <linux/err.h>
#include <linux/kthread.h>
#include <linux/math64.h>
#include <linux/module.h>
#include <linux/netlink.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/ptp_clock_kernel.h>
#include <linux/slab.h>
#include <linux/sprintf.h>

#include "core.h"
#include "dpll.h"
#include "prop.h"
#include "regs.h"

#define ZL3073X_DPLL_REF_NONE		ZL3073X_NUM_REFS
#define ZL3073X_DPLL_REF_IS_VALID(_ref)	((_ref) != ZL3073X_DPLL_REF_NONE)

/**
 * struct zl3073x_dpll_pin - DPLL pin
 * @list: this DPLL pin list entry
 * @dpll: DPLL the pin is registered to
 * @dpll_pin: pointer to registered dpll_pin
 * @tracker: tracking object for the acquired reference
 * @fwnode: firmware node handle
 * @label: package label
 * @dir: pin direction
 * @id: pin id
 * @prio: pin priority <0, 14>
 * @esync_control: embedded sync is controllable
 * @phase_gran: phase adjustment granularity
 * @operstate: last saved operational state
 * @phase_offset: last saved pin phase offset
 * @freq_offset: last saved fractional frequency offset
 * @measured_freq: last saved measured frequency
 */
struct zl3073x_dpll_pin {
	struct list_head	list;
	struct zl3073x_dpll	*dpll;
	struct dpll_pin		*dpll_pin;
	dpll_tracker		tracker;
	struct fwnode_handle	*fwnode;
	char			label[8];
	enum dpll_pin_direction	dir;
	u8			id;
	u8			prio;
	bool			esync_control;
	s32			phase_gran;
	enum dpll_pin_operstate	operstate;
	s64			phase_offset;
	s64			freq_offset;
	u32			measured_freq;
};

/*
 * Supported esync ranges for input and for output per output pair type
 */
static const struct dpll_pin_frequency esync_freq_ranges[] = {
	DPLL_PIN_FREQUENCY_RANGE(0, 1),
};

/**
 * zl3073x_dpll_is_input_pin - check if the pin is input one
 * @pin: pin to check
 *
 * Return: true if pin is input, false if pin is output.
 */
static bool
zl3073x_dpll_is_input_pin(struct zl3073x_dpll_pin *pin)
{
	return pin->dir == DPLL_PIN_DIRECTION_INPUT;
}

/**
 * zl3073x_dpll_is_nco_pin - check if the pin is a virtual NCO pin
 * @pin: pin to check
 *
 * Return: true if pin is a virtual NCO pin, false otherwise.
 */
static bool
zl3073x_dpll_is_nco_pin(struct zl3073x_dpll_pin *pin)
{
	return pin->id == ZL3073X_NCO_PIN_ID;
}

/**
 * zl3073x_dpll_is_p_pin - check if the pin is P-pin
 * @pin: pin to check
 *
 * Return: true if the pin is P-pin, false if it is N-pin
 */
static bool
zl3073x_dpll_is_p_pin(struct zl3073x_dpll_pin *pin)
{
	return zl3073x_is_p_pin(pin->id);
}

static int
zl3073x_dpll_pin_direction_get(const struct dpll_pin *dpll_pin, void *pin_priv,
			       const struct dpll_device *dpll, void *dpll_priv,
			       enum dpll_pin_direction *direction,
			       struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll_pin *pin = pin_priv;

	*direction = pin->dir;

	return 0;
}

static struct zl3073x_dpll_pin *
zl3073x_dpll_pin_get_by_ref(struct zl3073x_dpll *zldpll, u8 ref_id)
{
	struct zl3073x_dpll_pin *pin;

	lockdep_assert_held(&zldpll->lock);

	list_for_each_entry(pin, &zldpll->pins, list) {
		if (zl3073x_dpll_is_input_pin(pin) &&
		    zl3073x_input_pin_ref_get(pin->id) == ref_id)
			return pin;
	}

	return NULL;
}

/**
 * zl3073x_dpll_output_pin_sibling_get - get the other pin of an output pair
 * @pin: output pin whose sibling is sought
 *
 * Output pin ids are allocated in P/N pairs (P even, N odd) that share a
 * single HW output. Looks up the other pin of the pair in the pin list
 * of this DPLL. A pin is on the list from just before its registration
 * until just after its unregistration, so a registered sibling is always
 * found, but the returned pin may also be one that is not (yet or any
 * longer) registered.
 *
 * Return: pointer to sibling pin, or NULL if it is not on the pin list
 */
static struct zl3073x_dpll_pin *
zl3073x_dpll_output_pin_sibling_get(struct zl3073x_dpll_pin *pin)
{
	struct zl3073x_dpll_pin *sibling;

	lockdep_assert_held(&pin->dpll->lock);

	list_for_each_entry(sibling, &pin->dpll->pins, list) {
		if (!zl3073x_dpll_is_input_pin(sibling) &&
		    sibling->id == (pin->id ^ 1))
			return sibling;
	}

	return NULL;
}

static struct zl3073x_dpll_pin *
zl3073x_dpll_nco_pin_get(struct zl3073x_dpll *zldpll)
{
	struct zl3073x_dpll_pin *pin;

	lockdep_assert_held(&zldpll->lock);

	list_for_each_entry(pin, &zldpll->pins, list) {
		if (zl3073x_dpll_is_nco_pin(pin))
			return pin;
	}

	return NULL;
}

static int
zl3073x_dpll_input_pin_esync_get(const struct dpll_pin *dpll_pin,
				 void *pin_priv,
				 const struct dpll_device *dpll,
				 void *dpll_priv,
				 struct dpll_pin_esync *esync,
				 struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dev *zldev = zldpll->dev;
	struct zl3073x_dpll_pin *pin = pin_priv;
	const struct zl3073x_ref *ref;
	u8 ref_id;

	guard(mutex)(&zldpll->lock);

	ref_id = zl3073x_input_pin_ref_get(pin->id);
	ref = zl3073x_ref_state_get(zldev, ref_id);

	if (!pin->esync_control || zl3073x_ref_freq_get(ref) <= 1)
		return -EOPNOTSUPP;

	esync->range = esync_freq_ranges;
	esync->range_num = ARRAY_SIZE(esync_freq_ranges);

	switch (zl3073x_ref_sync_mode_get(ref)) {
	case ZL_REF_SYNC_CTRL_MODE_50_50_ESYNC_25_75:
		esync->freq = ref->esync_n_div == ZL_REF_ESYNC_DIV_1HZ ? 1 : 0;
		esync->pulse = 25;
		break;
	default:
		esync->freq = 0;
		esync->pulse = 0;
		break;
	}

	return 0;
}

static int
zl3073x_dpll_input_pin_esync_set(const struct dpll_pin *dpll_pin,
				 void *pin_priv,
				 const struct dpll_device *dpll,
				 void *dpll_priv, u64 freq,
				 struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dev *zldev = zldpll->dev;
	struct zl3073x_dpll_pin *pin = pin_priv;
	struct zl3073x_ref ref;
	u8 ref_id, sync_mode;

	guard(mutex)(&zldpll->lock);

	ref_id = zl3073x_input_pin_ref_get(pin->id);
	ref = *zl3073x_ref_state_get(zldev, ref_id);

	/* Use freq == 0 to disable esync */
	if (!freq)
		sync_mode = ZL_REF_SYNC_CTRL_MODE_REFSYNC_PAIR_OFF;
	else
		sync_mode = ZL_REF_SYNC_CTRL_MODE_50_50_ESYNC_25_75;

	zl3073x_ref_sync_mode_set(&ref, sync_mode);

	if (freq) {
		/* 1 Hz is only supported frequency now */
		ref.esync_n_div = ZL_REF_ESYNC_DIV_1HZ;
	}

	/* Update reference configuration */
	return zl3073x_ref_state_set(zldev, ref_id, &ref);
}

static int
zl3073x_dpll_input_pin_ref_sync_get(const struct dpll_pin *dpll_pin,
				    void *pin_priv,
				    const struct dpll_pin *ref_sync_pin,
				    void *ref_sync_pin_priv,
				    enum dpll_pin_state *state,
				    struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll_pin *sync_pin = ref_sync_pin_priv;
	struct zl3073x_dpll_pin *pin = pin_priv;
	struct zl3073x_dpll *zldpll = pin->dpll;
	struct zl3073x_dev *zldev = zldpll->dev;
	const struct zl3073x_ref *ref;
	u8 ref_id, mode, pair;

	guard(mutex)(&zldpll->lock);

	ref_id = zl3073x_input_pin_ref_get(pin->id);
	ref = zl3073x_ref_state_get(zldev, ref_id);
	mode = zl3073x_ref_sync_mode_get(ref);
	pair = zl3073x_ref_sync_pair_get(ref);

	if (mode == ZL_REF_SYNC_CTRL_MODE_REFSYNC_PAIR &&
	    pair == zl3073x_input_pin_ref_get(sync_pin->id))
		*state = DPLL_PIN_STATE_CONNECTED;
	else
		*state = DPLL_PIN_STATE_DISCONNECTED;

	return 0;
}

static int
zl3073x_dpll_input_pin_ref_sync_set(const struct dpll_pin *dpll_pin,
				    void *pin_priv,
				    const struct dpll_pin *ref_sync_pin,
				    void *ref_sync_pin_priv,
				    const enum dpll_pin_state state,
				    struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll_pin *sync_pin = ref_sync_pin_priv;
	struct zl3073x_dpll_pin *pin = pin_priv;
	struct zl3073x_dpll *zldpll = pin->dpll;
	struct zl3073x_dev *zldev = zldpll->dev;
	u8 mode, ref_id, sync_ref_id;
	struct zl3073x_chan chan;
	struct zl3073x_ref ref;
	bool sync_ntf = false;
	int rc;

	mutex_lock(&zldpll->lock);

	ref_id = zl3073x_input_pin_ref_get(pin->id);
	sync_ref_id = zl3073x_input_pin_ref_get(sync_pin->id);
	ref = *zl3073x_ref_state_get(zldev, ref_id);

	if (state == DPLL_PIN_STATE_CONNECTED) {
		const struct zl3073x_ref *sync_ref;
		u32 ref_freq, sync_freq;

		sync_ref = zl3073x_ref_state_get(zldev, sync_ref_id);
		ref_freq = zl3073x_ref_freq_get(&ref);
		sync_freq = zl3073x_ref_freq_get(sync_ref);

		/* Sync signal must be 8 kHz or less and clock reference
		 * must be 1 kHz or more and higher than the sync signal.
		 */
		if (sync_freq > 8000) {
			NL_SET_ERR_MSG(extack,
				       "sync frequency must be 8 kHz or less");
			rc = -EINVAL;
			goto unlock;
		}
		if (ref_freq < 1000) {
			NL_SET_ERR_MSG(extack,
				       "clock frequency must be 1 kHz or more");
			rc = -EINVAL;
			goto unlock;
		}
		if (ref_freq <= sync_freq) {
			NL_SET_ERR_MSG(extack,
				       "clock frequency must be higher than sync frequency");
			rc = -EINVAL;
			goto unlock;
		}

		zl3073x_ref_sync_pair_set(&ref, sync_ref_id);
		mode = ZL_REF_SYNC_CTRL_MODE_REFSYNC_PAIR;
	} else {
		mode = ZL_REF_SYNC_CTRL_MODE_REFSYNC_PAIR_OFF;
	}

	zl3073x_ref_sync_mode_set(&ref, mode);

	rc = zl3073x_ref_state_set(zldev, ref_id, &ref);
	if (rc)
		goto unlock;

	/* All code paths accessing per-channel reference priorities are
	 * serialized by the subsystem dpll_lock, so it is safe to release
	 * our lock here before iterating over the other channels.
	 */
	mutex_unlock(&zldpll->lock);

	if (state != DPLL_PIN_STATE_CONNECTED)
		return 0;

	/* The datasheet recommends excluding the sync source from automatic
	 * reference selection by setting its priority to NONE on all DPLL
	 * channels. This is advisory - the ref sync pair is already
	 * configured, so a failure here is not fatal. On disconnect the
	 * priority is left as NONE and the user must explicitly make the
	 * pin selectable again.
	 */
	list_for_each_entry(zldpll, &zldev->dplls, list) {
		u8 prio;

		mutex_lock(&zldpll->lock);

		chan = *zl3073x_chan_state_get(zldev, zldpll->id);
		prio = zl3073x_chan_ref_prio_get(&chan, sync_ref_id);
		if (prio == ZL_DPLL_REF_PRIO_NONE) {
			mutex_unlock(&zldpll->lock);
			continue; /* Ref is already non-selectable */
		}

		zl3073x_chan_ref_prio_set(&chan, sync_ref_id,
					  ZL_DPLL_REF_PRIO_NONE);
		if (zl3073x_chan_state_set(zldev, zldpll->id, &chan))
			dev_warn(zldev->dev,
				 "Failed to set ref prio on DPLL%u\n",
				 zldpll->id);
		else
			sync_ntf = true;

		mutex_unlock(&zldpll->lock);
	}
	if (sync_ntf)
		__dpll_pin_change_ntf(sync_pin->dpll_pin);

	return 0;
unlock:
	mutex_unlock(&zldpll->lock);
	return rc;
}

static int
zl3073x_dpll_input_pin_ffo_get(const struct dpll_pin *dpll_pin, void *pin_priv,
			       const struct dpll_device *dpll, void *dpll_priv,
			       struct dpll_ffo_param *ffo,
			       struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dpll_pin *pin = pin_priv;

	guard(mutex)(&zldpll->lock);

	if (pin->operstate != DPLL_PIN_OPERSTATE_ACTIVE)
		return -ENODATA;

	ffo->ffo = pin->freq_offset;

	return 0;
}

static int
zl3073x_dpll_input_pin_measured_freq_get(const struct dpll_pin *dpll_pin,
					 void *pin_priv,
					 const struct dpll_device *dpll,
					 void *dpll_priv, u64 *measured_freq,
					 struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dpll_pin *pin = pin_priv;

	guard(mutex)(&zldpll->lock);

	*measured_freq = pin->measured_freq;
	*measured_freq *= DPLL_PIN_MEASURED_FREQUENCY_DIVIDER;

	return 0;
}

static int
zl3073x_dpll_input_pin_frequency_get(const struct dpll_pin *dpll_pin,
				     void *pin_priv,
				     const struct dpll_device *dpll,
				     void *dpll_priv, u64 *frequency,
				     struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dpll_pin *pin = pin_priv;
	u8 ref_id;

	guard(mutex)(&zldpll->lock);

	ref_id = zl3073x_input_pin_ref_get(pin->id);
	*frequency = zl3073x_dev_ref_freq_get(zldpll->dev, ref_id);

	return 0;
}

static int
zl3073x_dpll_input_pin_frequency_set(const struct dpll_pin *dpll_pin,
				     void *pin_priv,
				     const struct dpll_device *dpll,
				     void *dpll_priv, u64 frequency,
				     struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dev *zldev = zldpll->dev;
	struct zl3073x_dpll_pin *pin = pin_priv;
	struct zl3073x_ref ref;
	u8 ref_id;

	guard(mutex)(&zldpll->lock);

	/* Get reference state */
	ref_id = zl3073x_input_pin_ref_get(pin->id);
	ref = *zl3073x_ref_state_get(zldev, ref_id);

	/* Update frequency */
	zl3073x_ref_freq_set(&ref, frequency);

	/* Commit reference state */
	return zl3073x_ref_state_set(zldev, ref_id, &ref);
}

/**
 * zl3073x_dpll_connected_ref_get - get currently connected reference
 * @zldpll: pointer to zl3073x_dpll
 *
 * Looks for currently connected reference the DPLL is locked to.
 *
 * Return: reference index if locked, ZL3073X_DPLL_REF_NONE otherwise
 */
static u8
zl3073x_dpll_connected_ref_get(struct zl3073x_dpll *zldpll)
{
	const struct zl3073x_chan *chan = zl3073x_chan_state_get(zldpll->dev,
								 zldpll->id);
	u8 state;

	/* A reference is connected only when the DPLL is locked to it */
	state = zl3073x_chan_refsel_state_get(chan);
	if (state == ZL_DPLL_REFSEL_STATUS_STATE_LOCK)
		return zl3073x_chan_refsel_ref_get(chan);

	return ZL3073X_DPLL_REF_NONE;
}

static int
zl3073x_dpll_input_pin_phase_offset_get(const struct dpll_pin *dpll_pin,
					void *pin_priv,
					const struct dpll_device *dpll,
					void *dpll_priv, s64 *phase_offset,
					struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dev *zldev = zldpll->dev;
	struct zl3073x_dpll_pin *pin = pin_priv;
	const struct zl3073x_ref *ref;
	u8 conn_id, ref_id;
	s64 ref_phase;

	guard(mutex)(&zldpll->lock);

	/* Get currently connected reference */
	conn_id = zl3073x_dpll_connected_ref_get(zldpll);

	/* Report phase offset only for currently connected pin if the phase
	 * monitor feature is disabled and only if the input pin signal is
	 * present.
	 */
	ref_id = zl3073x_input_pin_ref_get(pin->id);
	ref = zl3073x_ref_state_get(zldev, ref_id);
	if ((!zldpll->phase_monitor && ref_id != conn_id) ||
	    !zl3073x_ref_is_status_ok(ref)) {
		*phase_offset = 0;
		return 0;
	}

	ref_phase = pin->phase_offset;

	/* The DPLL being locked to a higher freq than the current ref
	 * the phase offset is modded to the period of the signal
	 * the dpll is locked to.
	 */
	if (ZL3073X_DPLL_REF_IS_VALID(conn_id) && conn_id != ref_id) {
		u32 conn_freq, ref_freq;

		/* Get frequency of connected and given ref */
		conn_freq = zl3073x_dev_ref_freq_get(zldev, conn_id);
		ref_freq = zl3073x_ref_freq_get(ref);

		if (conn_freq > ref_freq) {
			s64 conn_period, div_factor;

			conn_period = div_s64(PSEC_PER_SEC, conn_freq);
			div_factor = div64_s64(ref_phase, conn_period);
			ref_phase -= conn_period * div_factor;
		}
	}

	*phase_offset = ref_phase * DPLL_PHASE_OFFSET_DIVIDER;

	return 0;
}

static int
zl3073x_dpll_input_pin_phase_adjust_get(const struct dpll_pin *dpll_pin,
					void *pin_priv,
					const struct dpll_device *dpll,
					void *dpll_priv,
					s32 *phase_adjust,
					struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dev *zldev = zldpll->dev;
	struct zl3073x_dpll_pin *pin = pin_priv;
	const struct zl3073x_ref *ref;
	s64 phase_comp;
	u8 ref_id;

	guard(mutex)(&zldpll->lock);

	/* Read reference configuration */
	ref_id = zl3073x_input_pin_ref_get(pin->id);
	ref = zl3073x_ref_state_get(zldev, ref_id);

	/* Perform sign extension based on register width */
	if (zl3073x_dev_is_ref_phase_comp_32bit(zldev))
		phase_comp = sign_extend64(ref->phase_comp, 31);
	else
		phase_comp = sign_extend64(ref->phase_comp, 47);

	/* Reverse two's complement negation applied during set and convert
	 * to 32bit signed int
	 */
	*phase_adjust = (s32)-phase_comp;

	return 0;
}

static int
zl3073x_dpll_input_pin_phase_adjust_set(const struct dpll_pin *dpll_pin,
					void *pin_priv,
					const struct dpll_device *dpll,
					void *dpll_priv,
					s32 phase_adjust,
					struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dev *zldev = zldpll->dev;
	struct zl3073x_dpll_pin *pin = pin_priv;
	struct zl3073x_ref ref;
	u8 ref_id;

	guard(mutex)(&zldpll->lock);

	/* Read reference configuration */
	ref_id = zl3073x_input_pin_ref_get(pin->id);
	ref = *zl3073x_ref_state_get(zldev, ref_id);

	/* The value in the register is stored as two's complement negation
	 * of requested value.
	 */
	ref.phase_comp = -phase_adjust;

	/* Update reference configuration */
	return zl3073x_ref_state_set(zldev, ref_id, &ref);
}

/**
 * zl3073x_dpll_ref_operstate_get - get operational state for input pin
 * @pin: pointer to pin
 * @operstate: place to store operational state
 *
 * Returns the actual hardware state of the pin: whether it is actively
 * used by the DPLL, has no signal, failed qualification, or is simply
 * not in use.
 *
 * Return: 0 on success, <0 on error
 */
static int
zl3073x_dpll_ref_operstate_get(struct zl3073x_dpll_pin *pin,
			       enum dpll_pin_operstate *operstate)
{
	struct zl3073x_dpll *zldpll = pin->dpll;
	struct zl3073x_dev *zldev = zldpll->dev;
	const struct zl3073x_ref *ref;
	u8 ref_id;

	lockdep_assert_held(&zldpll->lock);

	ref_id = zl3073x_input_pin_ref_get(pin->id);

	/* Check if this pin is the currently locked reference */
	if (ref_id == zl3073x_dpll_connected_ref_get(zldpll)) {
		*operstate = DPLL_PIN_OPERSTATE_ACTIVE;
		return 0;
	}

	/* Check reference monitor status */
	ref = zl3073x_ref_state_get(zldev, ref_id);
	if (ref->mon_status & ZL_REF_MON_STATUS_LOS)
		*operstate = DPLL_PIN_OPERSTATE_NO_SIGNAL;
	else if (!zl3073x_ref_is_status_ok(ref))
		*operstate = DPLL_PIN_OPERSTATE_QUAL_FAILED;
	else
		*operstate = DPLL_PIN_OPERSTATE_STANDBY;

	return 0;
}

static int
zl3073x_dpll_input_pin_state_on_dpll_get(const struct dpll_pin *dpll_pin,
					 void *pin_priv,
					 const struct dpll_device *dpll,
					 void *dpll_priv,
					 enum dpll_pin_state *state,
					 struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dpll_pin *pin = pin_priv;
	const struct zl3073x_chan *chan;
	u8 mode, ref;

	guard(mutex)(&zldpll->lock);

	chan = zl3073x_chan_state_get(zldpll->dev, zldpll->id);
	ref = zl3073x_input_pin_ref_get(pin->id);
	mode = zl3073x_chan_mode_get(chan);

	switch (mode) {
	case ZL_DPLL_MODE_REFSEL_MODE_REFLOCK:
		if (ref == zl3073x_chan_ref_get(chan))
			*state = DPLL_PIN_STATE_CONNECTED;
		else
			*state = DPLL_PIN_STATE_DISCONNECTED;
		break;
	case ZL_DPLL_MODE_REFSEL_MODE_AUTO:
		if (zl3073x_chan_ref_is_selectable(chan, ref))
			*state = DPLL_PIN_STATE_SELECTABLE;
		else
			*state = DPLL_PIN_STATE_DISCONNECTED;
		break;
	default:
		*state = DPLL_PIN_STATE_DISCONNECTED;
		break;
	}

	return 0;
}

static int
zl3073x_dpll_input_pin_operstate_on_dpll_get(const struct dpll_pin *dpll_pin,
					     void *pin_priv,
					     const struct dpll_device *dpll,
					     void *dpll_priv,
					     enum dpll_pin_operstate *operstate,
					     struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dpll_pin *pin = pin_priv;

	guard(mutex)(&zldpll->lock);

	return zl3073x_dpll_ref_operstate_get(pin, operstate);
}

static int
zl3073x_dpll_input_pin_state_on_dpll_set(const struct dpll_pin *dpll_pin,
					 void *pin_priv,
					 const struct dpll_device *dpll,
					 void *dpll_priv,
					 enum dpll_pin_state state,
					 struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dpll_pin *pin = pin_priv;
	struct zl3073x_dpll_pin *nco_pin = NULL;
	struct zl3073x_chan chan;
	u8 mode, ref;
	int rc = 0;

	mutex_lock(&zldpll->lock);

	chan = *zl3073x_chan_state_get(zldpll->dev, zldpll->id);
	ref = zl3073x_input_pin_ref_get(pin->id);
	mode = zl3073x_chan_mode_get(&chan);

	switch (mode) {
	case ZL_DPLL_MODE_REFSEL_MODE_REFLOCK:
		if (state == DPLL_PIN_STATE_CONNECTED) {
			/* Choose the pin as new selected reference */
			zl3073x_chan_ref_set(&chan, ref);
		} else if (state == DPLL_PIN_STATE_DISCONNECTED) {
			/* Choose new mode based on lock status */
			switch (zldpll->lock_status) {
			case DPLL_LOCK_STATUS_LOCKED_HO_ACQ:
			case DPLL_LOCK_STATUS_HOLDOVER:
				mode = ZL_DPLL_MODE_REFSEL_MODE_HOLDOVER;
				break;
			default:
				mode = ZL_DPLL_MODE_REFSEL_MODE_FREERUN;
				break;
			}
			zl3073x_chan_mode_set(&chan, mode);
		} else {
			goto invalid_state;
		}
		break;
	case ZL_DPLL_MODE_REFSEL_MODE_NCO:
		if (state == DPLL_PIN_STATE_CONNECTED)
			nco_pin = zl3073x_dpll_nco_pin_get(zldpll);
		fallthrough;
	case ZL_DPLL_MODE_REFSEL_MODE_FREERUN:
	case ZL_DPLL_MODE_REFSEL_MODE_HOLDOVER:
		if (state == DPLL_PIN_STATE_CONNECTED) {
			/* Choose the pin as new selected reference */
			zl3073x_chan_ref_set(&chan, ref);
			/* Switch to reflock mode */
			zl3073x_chan_mode_set(&chan,
					      ZL_DPLL_MODE_REFSEL_MODE_REFLOCK);
		} else if (state != DPLL_PIN_STATE_DISCONNECTED) {
			goto invalid_state;
		}
		break;
	case ZL_DPLL_MODE_REFSEL_MODE_AUTO:
		if (state == DPLL_PIN_STATE_SELECTABLE) {
			if (zl3073x_chan_ref_is_selectable(&chan, ref))
				goto unlock; /* Pin is already selectable */

			/* Restore pin priority in HW */
			zl3073x_chan_ref_prio_set(&chan, ref, pin->prio);
		} else if (state == DPLL_PIN_STATE_DISCONNECTED) {
			if (!zl3073x_chan_ref_is_selectable(&chan, ref))
				goto unlock; /* Pin is already disconnected */

			/* Set pin priority to none in HW */
			zl3073x_chan_ref_prio_set(&chan, ref,
						  ZL_DPLL_REF_PRIO_NONE);
		} else {
			goto invalid_state;
		}
		break;
	default:
		/* In other modes we cannot change input reference */
		NL_SET_ERR_MSG(extack,
			       "Pin state cannot be changed in current mode");
		rc = -EOPNOTSUPP;
		goto unlock;
	}

	/* Commit DPLL channel changes */
	rc = zl3073x_chan_state_set(zldpll->dev, zldpll->id, &chan);
	goto unlock;

invalid_state:
	NL_SET_ERR_MSG_MOD(extack, "Invalid pin state for this device mode");
	rc = -EINVAL;
unlock:
	mutex_unlock(&zldpll->lock);

	/* If leaving NCO mode, notify userspace about the NCO pin
	 * state change - the periodic worker skips the NCO pin.
	 */
	if (!rc && nco_pin)
		__dpll_pin_change_ntf(nco_pin->dpll_pin);

	return rc;
}

static int
zl3073x_dpll_input_pin_prio_get(const struct dpll_pin *dpll_pin, void *pin_priv,
				const struct dpll_device *dpll, void *dpll_priv,
				u32 *prio, struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dpll_pin *pin = pin_priv;

	guard(mutex)(&zldpll->lock);

	*prio = pin->prio;

	return 0;
}

static int
zl3073x_dpll_input_pin_prio_set(const struct dpll_pin *dpll_pin, void *pin_priv,
				const struct dpll_device *dpll, void *dpll_priv,
				u32 prio, struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dpll_pin *pin = pin_priv;
	struct zl3073x_chan chan;
	u8 ref;
	int rc;

	guard(mutex)(&zldpll->lock);

	if (prio > ZL_DPLL_REF_PRIO_MAX)
		return -EINVAL;

	/* If the pin is selectable then update HW registers */
	chan = *zl3073x_chan_state_get(zldpll->dev, zldpll->id);
	ref = zl3073x_input_pin_ref_get(pin->id);
	if (zl3073x_chan_ref_is_selectable(&chan, ref)) {
		zl3073x_chan_ref_prio_set(&chan, ref, prio);
		rc = zl3073x_chan_state_set(zldpll->dev, zldpll->id, &chan);
		if (rc)
			return rc;
	}

	/* Save priority */
	pin->prio = prio;

	return 0;
}

static int
zl3073x_dpll_output_pin_esync_get(const struct dpll_pin *dpll_pin,
				  void *pin_priv,
				  const struct dpll_device *dpll,
				  void *dpll_priv,
				  struct dpll_pin_esync *esync,
				  struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dev *zldev = zldpll->dev;
	struct zl3073x_dpll_pin *pin = pin_priv;
	const struct zl3073x_synth *synth;
	const struct zl3073x_out *out;
	u32 synth_freq, out_freq;
	u8 out_id;

	guard(mutex)(&zldpll->lock);

	out_id = zl3073x_output_pin_out_get(pin->id);
	out = zl3073x_out_state_get(zldev, out_id);

	/* If N-division is enabled, esync is not supported. The register used
	 * for N-division is also used for the esync divider so both cannot
	 * be used.
	 */
	if (zl3073x_out_is_ndiv(out))
		return -EOPNOTSUPP;

	/* Get attached synth frequency */
	synth = zl3073x_synth_state_get(zldev, zl3073x_out_synth_get(out));
	synth_freq = zl3073x_synth_freq_get(synth);
	out_freq = synth_freq / out->div;

	if (!pin->esync_control || out_freq <= 1)
		return -EOPNOTSUPP;

	esync->range = esync_freq_ranges;
	esync->range_num = ARRAY_SIZE(esync_freq_ranges);

	if (!zl3073x_out_esync_is_enabled(out)) {
		/* No need to read esync data if it is not enabled */
		esync->freq = 0;
		esync->pulse = 0;

		return 0;
	}

	/* Compute esync frequency */
	esync->freq = out_freq / out->esync_n_period;

	/* By comparing the esync_pulse_width to the half of the pulse width
	 * the esync pulse percentage can be determined.
	 * Note that half pulse width is in units of half synth cycles, which
	 * is why it reduces down to be output_div.
	 */
	esync->pulse = div_u64(mul_u32_u32(50, out->esync_n_width), out->div);

	return 0;
}

static int
zl3073x_dpll_output_pin_esync_set(const struct dpll_pin *dpll_pin,
				  void *pin_priv,
				  const struct dpll_device *dpll,
				  void *dpll_priv, u64 freq,
				  struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dev *zldev = zldpll->dev;
	struct zl3073x_dpll_pin *pin = pin_priv;
	struct zl3073x_dpll_pin *sibling = NULL;
	const struct zl3073x_synth *synth;
	struct zl3073x_out out;
	u32 synth_freq;
	u8 out_id;
	int rc;

	mutex_lock(&zldpll->lock);

	out_id = zl3073x_output_pin_out_get(pin->id);
	out = *zl3073x_out_state_get(zldev, out_id);

	/* If N-division is enabled, esync is not supported. The register used
	 * for N-division is also used for the esync divider so both cannot
	 * be used.
	 */
	if (zl3073x_out_is_ndiv(&out)) {
		rc = -EOPNOTSUPP;
		goto unlock;
	}

	if (!freq) {
		zl3073x_out_esync_disable(&out);
		goto commit;
	}

	/* Get attached synth frequency */
	synth = zl3073x_synth_state_get(zldev, zl3073x_out_synth_get(&out));
	synth_freq = zl3073x_synth_freq_get(synth);

	/* Enable 1PPS eSync for this pin frequency */
	zl3073x_out_esync_enable(&out, synth_freq / out.div);
commit:
	/* Commit output configuration */
	rc = zl3073x_out_state_set(zldev, out_id, &out);
	if (rc)
		goto unlock;

	/* The clock type, esync period and esync width are all shared by
	 * both pins of the output pair, so the sibling pin's esync
	 * configuration changes too and userspace has to be notified.
	 */
	sibling = zl3073x_dpll_output_pin_sibling_get(pin);
unlock:
	mutex_unlock(&zldpll->lock);

	if (!rc && sibling)
		__dpll_pin_change_ntf(sibling->dpll_pin);

	return rc;
}

static int
zl3073x_dpll_output_pin_frequency_get(const struct dpll_pin *dpll_pin,
				      void *pin_priv,
				      const struct dpll_device *dpll,
				      void *dpll_priv, u64 *frequency,
				      struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dpll_pin *pin = pin_priv;

	guard(mutex)(&zldpll->lock);

	*frequency = zl3073x_dev_output_pin_freq_get(zldpll->dev, pin->id);

	return 0;
}

static int
zl3073x_dpll_output_pin_frequency_set(const struct dpll_pin *dpll_pin,
				      void *pin_priv,
				      const struct dpll_device *dpll,
				      void *dpll_priv, u64 frequency,
				      struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dev *zldev = zldpll->dev;
	struct zl3073x_dpll_pin *pin = pin_priv;
	struct zl3073x_dpll_pin *sibling = NULL;
	const struct zl3073x_synth *synth;
	u32 new_div, synth_freq;
	struct zl3073x_out out;
	u64 n_period, rem;
	u8 out_id;
	int rc;

	mutex_lock(&zldpll->lock);

	out_id = zl3073x_output_pin_out_get(pin->id);
	out = *zl3073x_out_state_get(zldev, out_id);

	/* Get attached synth frequency and compute new divisor */
	synth = zl3073x_synth_state_get(zldev, zl3073x_out_synth_get(&out));
	synth_freq = zl3073x_synth_freq_get(synth);
	new_div = synth_freq / (u32)frequency;

	/* Check signal format */
	if (!zl3073x_out_is_ndiv(&out)) {
		/* For non N-divided signal formats the frequency is computed
		 * as division of synth frequency and output divisor, which
		 * is shared by both pins of the output pair.
		 */
		out.div = new_div;

		/* For 50/50 duty cycle the divisor is equal to width */
		out.width = new_div;

		/* The embedded sync period and width are computed relative to
		 * the output carrier so they have to be adjusted to follow the
		 * new frequency.
		 */
		if (zl3073x_out_esync_is_enabled(&out)) {
			if (frequency == 1) {
				/* eSync cannot work on a 1 Hz carrier */
				zl3073x_out_esync_disable(&out);
			} else {
				/* Update esync period and width according to
				 * the new frequency.
				 */
				zl3073x_out_esync_enable(&out,
							 synth_freq / out.div);
			}
		}

		/* Commit output configuration */
		rc = zl3073x_out_state_set(zldev, out_id, &out);
		if (rc)
			goto unlock;

		/* The other pin's frequency changed too - it has to be
		 * notified about the change.
		 */
		sibling = zl3073x_dpll_output_pin_sibling_get(pin);

		goto unlock;
	}

	if (zl3073x_dpll_is_p_pin(pin)) {
		/* Keep the N-pin frequency: the new P-pin frequency has to be
		 * a multiple of it, at least twice as high.
		 */
		n_period = mul_u32_u32(out.esync_n_period, out.div);
		n_period = div64_u64_rem(n_period, new_div, &rem);

		/* Update the output divisor */
		out.div = new_div;

		/* For 50/50 duty cycle the divisor is equal to width */
		out.width = out.div;
	} else {
		/* The N-pin frequency has to divide the P-pin frequency and
		 * be at most half of it.
		 */
		n_period = frequency * out.div;
		n_period = div64_u64_rem(synth_freq, n_period, &rem);
	}
	if (n_period < 2) {
		NL_SET_ERR_MSG_FMT(extack,
				   "OUT%uN freq must be at most half of OUT%uP freq",
				   out_id, out_id);
		rc = -EINVAL;
		goto unlock;
	}
	if (n_period > U32_MAX) {
		NL_SET_ERR_MSG_FMT(extack,
				   "OUT%uN freq is too low for OUT%uP freq",
				   out_id, out_id);
		rc = -EINVAL;
		goto unlock;
	}
	if (rem != 0) {
		NL_SET_ERR_MSG_FMT(extack,
				   "OUT%uN freq must divide OUT%uP freq",
				   out_id, out_id);
		rc = -EINVAL;
		goto unlock;
	}
	out.esync_n_period = n_period;

	/* For 50/50 duty cycle the divisor is equal to width */
	out.esync_n_width = out.esync_n_period;

	/* Commit output configuration */
	rc = zl3073x_out_state_set(zldev, out_id, &out);
unlock:
	mutex_unlock(&zldpll->lock);

	if (!rc && sibling)
		__dpll_pin_change_ntf(sibling->dpll_pin);

	return rc;
}

static int
zl3073x_dpll_output_pin_phase_adjust_get(const struct dpll_pin *dpll_pin,
					 void *pin_priv,
					 const struct dpll_device *dpll,
					 void *dpll_priv,
					 s32 *phase_adjust,
					 struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dev *zldev = zldpll->dev;
	struct zl3073x_dpll_pin *pin = pin_priv;
	const struct zl3073x_out *out;
	u8 out_id;

	guard(mutex)(&zldpll->lock);

	out_id = zl3073x_output_pin_out_get(pin->id);
	out = zl3073x_out_state_get(zldev, out_id);

	/* The value in the register is expressed in half synth clock cycles. */
	*phase_adjust = out->phase_comp * pin->phase_gran;

	return 0;
}

static int
zl3073x_dpll_output_pin_phase_adjust_set(const struct dpll_pin *dpll_pin,
					 void *pin_priv,
					 const struct dpll_device *dpll,
					 void *dpll_priv,
					 s32 phase_adjust,
					 struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dev *zldev = zldpll->dev;
	struct zl3073x_dpll_pin *pin = pin_priv;
	struct zl3073x_dpll_pin *sibling = NULL;
	struct zl3073x_out out;
	u8 out_id;
	int rc;

	mutex_lock(&zldpll->lock);

	out_id = zl3073x_output_pin_out_get(pin->id);
	out = *zl3073x_out_state_get(zldev, out_id);

	/* The value in the register is expressed in half synth clock cycles. */
	out.phase_comp = phase_adjust / pin->phase_gran;

	/* Update output configuration from mailbox */
	rc = zl3073x_out_state_set(zldev, out_id, &out);
	if (rc)
		goto unlock;

	/* The phase compensation register is shared by both pins of the
	 * output pair, so the sibling pin's phase adjustment changes too.
	 */
	sibling = zl3073x_dpll_output_pin_sibling_get(pin);
unlock:
	mutex_unlock(&zldpll->lock);

	if (!rc && sibling)
		__dpll_pin_change_ntf(sibling->dpll_pin);

	return rc;
}

static int
zl3073x_dpll_output_pin_state_on_dpll_get(const struct dpll_pin *dpll_pin,
					  void *pin_priv,
					  const struct dpll_device *dpll,
					  void *dpll_priv,
					  enum dpll_pin_state *state,
					  struct netlink_ext_ack *extack)
{
	/* If the output pin is registered then it is always connected */
	*state = DPLL_PIN_STATE_CONNECTED;

	return 0;
}

static int
zl3073x_dpll_nco_pin_operstate_on_dpll_get(const struct dpll_pin *dpll_pin,
					   void *pin_priv,
					   const struct dpll_device *dpll,
					   void *dpll_priv,
					   enum dpll_pin_operstate *operstate,
					   struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	const struct zl3073x_chan *chan;

	guard(mutex)(&zldpll->lock);

	chan = zl3073x_chan_state_get(zldpll->dev, zldpll->id);
	if (zl3073x_chan_mode_is_nco(chan))
		*operstate = DPLL_PIN_OPERSTATE_ACTIVE;
	else
		*operstate = DPLL_PIN_OPERSTATE_STANDBY;

	return 0;
}

static int
zl3073x_dpll_nco_pin_state_on_dpll_get(const struct dpll_pin *dpll_pin,
				       void *pin_priv,
				       const struct dpll_device *dpll,
				       void *dpll_priv,
				       enum dpll_pin_state *state,
				       struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	const struct zl3073x_chan *chan;

	guard(mutex)(&zldpll->lock);

	chan = zl3073x_chan_state_get(zldpll->dev, zldpll->id);
	if (zl3073x_chan_mode_is_nco(chan))
		*state = DPLL_PIN_STATE_CONNECTED;
	else
		*state = DPLL_PIN_STATE_DISCONNECTED;

	return 0;
}

static int
zl3073x_dpll_nco_pin_state_on_dpll_set(const struct dpll_pin *dpll_pin,
				       void *pin_priv,
				       const struct dpll_device *dpll,
				       void *dpll_priv,
				       enum dpll_pin_state state,
				       struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll_pin *ref_pin = NULL;
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_chan chan;
	u8 ref;
	int rc;

	mutex_lock(&zldpll->lock);

	chan = *zl3073x_chan_state_get(zldpll->dev, zldpll->id);

	switch (state) {
	case DPLL_PIN_STATE_CONNECTED:
		if (zl3073x_chan_mode_is_nco(&chan)) {
			mutex_unlock(&zldpll->lock);
			return 0;
		}
		if (zl3073x_chan_mode_is_auto(&chan)) {
			NL_SET_ERR_MSG(extack,
				       "NCO pin cannot be connected in automatic mode");
			mutex_unlock(&zldpll->lock);
			return -EINVAL;
		}
		if (zl3073x_chan_mode_is_reflock(&chan)) {
			/* Get currently connected pin */
			ref = zl3073x_chan_ref_get(&chan);
			ref_pin = zl3073x_dpll_pin_get_by_ref(zldpll, ref);
		}
		rc = zl3073x_chan_nco_mode_set(zldpll->dev, zldpll->id);
		break;
	case DPLL_PIN_STATE_DISCONNECTED:
		if (!zl3073x_chan_mode_is_nco(&chan)) {
			mutex_unlock(&zldpll->lock);
			return 0;
		}
		/* Switch to freerun - holdover averaging was not
		 * updated during NCO mode.
		 */
		zl3073x_chan_mode_set(&chan,
				      ZL_DPLL_MODE_REFSEL_MODE_FREERUN);
		rc = zl3073x_chan_state_set(zldpll->dev, zldpll->id, &chan);
		break;
	default:
		NL_SET_ERR_MSG(extack, "invalid pin state for NCO pin");
		mutex_unlock(&zldpll->lock);
		return -EINVAL;
	}

	mutex_unlock(&zldpll->lock);

	if (!rc && ref_pin)
		__dpll_pin_change_ntf(ref_pin->dpll_pin);

	return rc;
}

static int
zl3073x_dpll_nco_pin_ffo_get(const struct dpll_pin *dpll_pin, void *pin_priv,
			     const struct dpll_device *dpll, void *dpll_priv,
			     struct dpll_ffo_param *ffo,
			     struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	const struct zl3073x_chan *chan;
	s64 df_offset;

	guard(mutex)(&zldpll->lock);

	chan = zl3073x_chan_state_get(zldpll->dev, zldpll->id);
	if (!zl3073x_chan_mode_is_nco(chan))
		return -ENODATA;

	/* Do not report FFO if a failure occurred during switching to NCO. */
	df_offset = zl3073x_chan_df_offset_get(chan);
	if (df_offset == ZL_DPLL_DF_OFFSET_UNKNOWN)
		return -ENODATA;

	/* dpll_df_offset register has inverted sign per datasheet:
	 * f_offset = f_nom * (-df_offset) / 2^48
	 * NCO pin reports DPLL output offset from nominal, so negate.
	 * Convert to PPT: ppt = -df * 5^12 / 2^36
	 */
	ffo->ffo = -mul_s64_u64_shr(df_offset, 244140625, 36);

	return 0;
}

static int
zl3073x_dpll_temp_get(const struct dpll_device *dpll, void *dpll_priv,
		      s32 *temp, struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dev *zldev = zldpll->dev;
	u16 val;
	int rc;

	guard(mutex)(&zldpll->lock);

	rc = zl3073x_read_u16(zldev, ZL_REG_DIE_TEMP_STATUS, &val);
	if (rc)
		return rc;

	/* Register value is in units of 0.1 C, convert to millidegrees */
	*temp = (s16)val * 100;

	return 0;
}

static int
__zl3073x_dpll_lock_status_get(struct zl3073x_dpll *zldpll,
			       enum dpll_lock_status *status)
{
	const struct zl3073x_chan *chan;

	lockdep_assert_held(&zldpll->lock);

	chan = zl3073x_chan_state_get(zldpll->dev, zldpll->id);

	switch (zl3073x_chan_mode_get(chan)) {
	case ZL_DPLL_MODE_REFSEL_MODE_FREERUN:
	case ZL_DPLL_MODE_REFSEL_MODE_NCO:
		/* In FREERUN and NCO modes the DPLL is always unlocked */
		*status = DPLL_LOCK_STATUS_UNLOCKED;

		return 0;
	default:
		break;
	}

	switch (zl3073x_chan_lock_state_get(chan)) {
	case ZL_DPLL_MON_STATUS_STATE_LOCK:
		if (zl3073x_chan_is_ho_ready(chan))
			*status = DPLL_LOCK_STATUS_LOCKED_HO_ACQ;
		else
			*status = DPLL_LOCK_STATUS_LOCKED;
		break;
	case ZL_DPLL_MON_STATUS_STATE_HOLDOVER:
	case ZL_DPLL_MON_STATUS_STATE_ACQUIRING:
		*status = DPLL_LOCK_STATUS_HOLDOVER;
		break;
	default:
		dev_warn(zldpll->dev->dev,
			 "Unknown DPLL monitor status: 0x%02x\n",
			 chan->mon_status);
		*status = DPLL_LOCK_STATUS_UNLOCKED;
		break;
	}

	return 0;
}

static int
zl3073x_dpll_lock_status_get(const struct dpll_device *dpll, void *dpll_priv,
			     enum dpll_lock_status *status,
			     enum dpll_lock_status_error *status_error,
			     struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;

	guard(mutex)(&zldpll->lock);

	return __zl3073x_dpll_lock_status_get(zldpll, status);
}

static int
zl3073x_dpll_supported_modes_get(const struct dpll_device *dpll,
				 void *dpll_priv, unsigned long *modes,
				 struct netlink_ext_ack *extack)
{
	__set_bit(DPLL_MODE_AUTOMATIC, modes);
	__set_bit(DPLL_MODE_MANUAL, modes);

	return 0;
}

static int
zl3073x_dpll_mode_get(const struct dpll_device *dpll, void *dpll_priv,
		      enum dpll_mode *mode, struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	const struct zl3073x_chan *chan;

	guard(mutex)(&zldpll->lock);

	chan = zl3073x_chan_state_get(zldpll->dev, zldpll->id);

	switch (zl3073x_chan_mode_get(chan)) {
	case ZL_DPLL_MODE_REFSEL_MODE_FREERUN:
	case ZL_DPLL_MODE_REFSEL_MODE_HOLDOVER:
	case ZL_DPLL_MODE_REFSEL_MODE_NCO:
	case ZL_DPLL_MODE_REFSEL_MODE_REFLOCK:
		/* Use MANUAL for device FREERUN, HOLDOVER, NCO and
		 * REFLOCK modes
		 */
		*mode = DPLL_MODE_MANUAL;
		break;
	case ZL_DPLL_MODE_REFSEL_MODE_AUTO:
		/* Use AUTO for device AUTO mode */
		*mode = DPLL_MODE_AUTOMATIC;
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static int
zl3073x_dpll_phase_offset_avg_factor_get(const struct dpll_device *dpll,
					 void *dpll_priv, u32 *factor,
					 struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;

	*factor = zl3073x_dev_phase_avg_factor_get(zldpll->dev);

	return 0;
}

static int
zl3073x_dpll_phase_offset_avg_factor_set(const struct dpll_device *dpll,
					 void *dpll_priv, u32 factor,
					 struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *item, *zldpll = dpll_priv;
	int rc;

	if (factor > 15) {
		NL_SET_ERR_MSG_FMT(extack,
				   "Phase offset average factor has to be from range <0,15>");
		return -EINVAL;
	}

	rc = zl3073x_dev_phase_avg_factor_set(zldpll->dev, factor);
	if (rc) {
		NL_SET_ERR_MSG_FMT(extack,
				   "Failed to set phase offset averaging factor");
		return rc;
	}

	/* The averaging factor is common for all DPLL channels so after
	 * change we have to send a notification for other DPLL devices.
	 */
	list_for_each_entry(item, &zldpll->dev->dplls, list) {
		struct dpll_device *dpll_dev = READ_ONCE(item->dpll_dev);

		if (item != zldpll && dpll_dev)
			__dpll_device_change_ntf(dpll_dev);
	}

	return 0;
}

static int
zl3073x_dpll_mode_set(const struct dpll_device *dpll, void *dpll_priv,
		      enum dpll_mode mode, struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;
	struct zl3073x_dpll_pin *nco_pin = NULL;
	struct zl3073x_chan chan;
	u8 hw_mode, ref;
	int rc;

	mutex_lock(&zldpll->lock);

	chan = *zl3073x_chan_state_get(zldpll->dev, zldpll->id);
	ref = zl3073x_chan_refsel_ref_get(&chan);

	if (mode == DPLL_MODE_MANUAL) {
		/* We are switching from automatic to manual mode:
		 * - if we have a valid reference selected during auto mode then
		 *   we will switch to forced reference lock mode and use this
		 *   reference for selection
		 * - if NO valid reference is selected, we will switch to forced
		 *   holdover mode or freerun mode, depending on the current
		 *   lock status
		 */
		if (ZL3073X_DPLL_REF_IS_VALID(ref))
			hw_mode = ZL_DPLL_MODE_REFSEL_MODE_REFLOCK;
		else if (zldpll->lock_status == DPLL_LOCK_STATUS_UNLOCKED)
			hw_mode = ZL_DPLL_MODE_REFSEL_MODE_FREERUN;
		else
			hw_mode = ZL_DPLL_MODE_REFSEL_MODE_HOLDOVER;
	} else {
		if (zl3073x_chan_mode_is_nco(&chan))
			nco_pin = zl3073x_dpll_nco_pin_get(zldpll);

		/* We are switching from manual to automatic mode:
		 * - if there is a valid reference selected then ensure that
		 *   it is selectable after switch to automatic mode
		 * - switch to automatic mode
		 */
		if (ZL3073X_DPLL_REF_IS_VALID(ref) &&
		    !zl3073x_chan_ref_is_selectable(&chan, ref)) {
			struct zl3073x_dpll_pin *pin;

			pin = zl3073x_dpll_pin_get_by_ref(zldpll, ref);
			if (pin) {
				/* Restore pin priority in HW */
				zl3073x_chan_ref_prio_set(&chan, ref,
							  pin->prio);
			}
		}

		hw_mode = ZL_DPLL_MODE_REFSEL_MODE_AUTO;
	}

	zl3073x_chan_mode_set(&chan, hw_mode);
	if (ZL3073X_DPLL_REF_IS_VALID(ref))
		zl3073x_chan_ref_set(&chan, ref);

	rc = zl3073x_chan_state_set(zldpll->dev, zldpll->id, &chan);
	if (rc) {
		NL_SET_ERR_MSG_MOD(extack,
				   "failed to set reference selection mode");
		mutex_unlock(&zldpll->lock);
		return rc;
	}

	mutex_unlock(&zldpll->lock);

	/* If leaving NCO mode, notify userspace about the NCO pin
	 * state change - the periodic worker skips the NCO pin.
	 */
	if (nco_pin)
		__dpll_pin_change_ntf(nco_pin->dpll_pin);

	return 0;
}

static int
zl3073x_dpll_phase_offset_monitor_get(const struct dpll_device *dpll,
				      void *dpll_priv,
				      enum dpll_feature_state *state,
				      struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;

	guard(mutex)(&zldpll->lock);

	if (zldpll->phase_monitor)
		*state = DPLL_FEATURE_STATE_ENABLE;
	else
		*state = DPLL_FEATURE_STATE_DISABLE;

	return 0;
}

static int
zl3073x_dpll_phase_offset_monitor_set(const struct dpll_device *dpll,
				      void *dpll_priv,
				      enum dpll_feature_state state,
				      struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;

	guard(mutex)(&zldpll->lock);

	zldpll->phase_monitor = (state == DPLL_FEATURE_STATE_ENABLE);

	return 0;
}

static int
zl3073x_dpll_freq_monitor_get(const struct dpll_device *dpll,
			      void *dpll_priv,
			      enum dpll_feature_state *state,
			      struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *zldpll = dpll_priv;

	if (READ_ONCE(zldpll->dev->freq_monitor))
		*state = DPLL_FEATURE_STATE_ENABLE;
	else
		*state = DPLL_FEATURE_STATE_DISABLE;

	return 0;
}

static int
zl3073x_dpll_freq_monitor_set(const struct dpll_device *dpll,
			      void *dpll_priv,
			      enum dpll_feature_state state,
			      struct netlink_ext_ack *extack)
{
	struct zl3073x_dpll *item, *zldpll = dpll_priv;
	struct zl3073x_dev *zldev = zldpll->dev;

	WRITE_ONCE(zldev->freq_monitor, state == DPLL_FEATURE_STATE_ENABLE);

	/* The frequency monitoring is common for all DPLL channels so after
	 * change we have to send a notification for other DPLL devices.
	 */
	list_for_each_entry(item, &zldev->dplls, list) {
		struct dpll_device *dpll_dev = READ_ONCE(item->dpll_dev);

		if (item != zldpll && dpll_dev)
			__dpll_device_change_ntf(dpll_dev);
	}

	return 0;
}

static const struct dpll_pin_ops zl3073x_dpll_input_pin_ops = {
	.supported_ffo = BIT(DPLL_FFO_PIN_DEVICE),
	.direction_get = zl3073x_dpll_pin_direction_get,
	.esync_get = zl3073x_dpll_input_pin_esync_get,
	.esync_set = zl3073x_dpll_input_pin_esync_set,
	.ffo_get = zl3073x_dpll_input_pin_ffo_get,
	.frequency_get = zl3073x_dpll_input_pin_frequency_get,
	.frequency_set = zl3073x_dpll_input_pin_frequency_set,
	.measured_freq_get = zl3073x_dpll_input_pin_measured_freq_get,
	.operstate_on_dpll_get = zl3073x_dpll_input_pin_operstate_on_dpll_get,
	.phase_offset_get = zl3073x_dpll_input_pin_phase_offset_get,
	.phase_adjust_get = zl3073x_dpll_input_pin_phase_adjust_get,
	.phase_adjust_set = zl3073x_dpll_input_pin_phase_adjust_set,
	.prio_get = zl3073x_dpll_input_pin_prio_get,
	.prio_set = zl3073x_dpll_input_pin_prio_set,
	.ref_sync_get = zl3073x_dpll_input_pin_ref_sync_get,
	.ref_sync_set = zl3073x_dpll_input_pin_ref_sync_set,
	.state_on_dpll_get = zl3073x_dpll_input_pin_state_on_dpll_get,
	.state_on_dpll_set = zl3073x_dpll_input_pin_state_on_dpll_set,
};

static const struct dpll_pin_ops zl3073x_dpll_output_pin_ops = {
	.direction_get = zl3073x_dpll_pin_direction_get,
	.esync_get = zl3073x_dpll_output_pin_esync_get,
	.esync_set = zl3073x_dpll_output_pin_esync_set,
	.frequency_get = zl3073x_dpll_output_pin_frequency_get,
	.frequency_set = zl3073x_dpll_output_pin_frequency_set,
	.phase_adjust_get = zl3073x_dpll_output_pin_phase_adjust_get,
	.phase_adjust_set = zl3073x_dpll_output_pin_phase_adjust_set,
	.state_on_dpll_get = zl3073x_dpll_output_pin_state_on_dpll_get,
};

static const struct dpll_pin_ops zl3073x_dpll_nco_pin_ops = {
	.supported_ffo = BIT(DPLL_FFO_PIN_DEVICE),
	.direction_get = zl3073x_dpll_pin_direction_get,
	.ffo_get = zl3073x_dpll_nco_pin_ffo_get,
	.operstate_on_dpll_get = zl3073x_dpll_nco_pin_operstate_on_dpll_get,
	.state_on_dpll_get = zl3073x_dpll_nco_pin_state_on_dpll_get,
	.state_on_dpll_set = zl3073x_dpll_nco_pin_state_on_dpll_set,
};

static const struct dpll_device_ops zl3073x_dpll_device_ops = {
	.lock_status_get = zl3073x_dpll_lock_status_get,
	.mode_get = zl3073x_dpll_mode_get,
	.mode_set = zl3073x_dpll_mode_set,
	.phase_offset_avg_factor_get = zl3073x_dpll_phase_offset_avg_factor_get,
	.phase_offset_avg_factor_set = zl3073x_dpll_phase_offset_avg_factor_set,
	.phase_offset_monitor_get = zl3073x_dpll_phase_offset_monitor_get,
	.phase_offset_monitor_set = zl3073x_dpll_phase_offset_monitor_set,
	.freq_monitor_get = zl3073x_dpll_freq_monitor_get,
	.freq_monitor_set = zl3073x_dpll_freq_monitor_set,
	.supported_modes_get = zl3073x_dpll_supported_modes_get,
};

/**
 * zl3073x_dpll_pin_alloc - allocate DPLL pin
 * @zldpll: pointer to zl3073x_dpll
 * @dir: pin direction
 * @id: pin id
 *
 * Allocates and initializes zl3073x_dpll_pin structure for given
 * pin id and direction.
 *
 * Return: pointer to allocated structure on success, error pointer on error
 */
static struct zl3073x_dpll_pin *
zl3073x_dpll_pin_alloc(struct zl3073x_dpll *zldpll, enum dpll_pin_direction dir,
		       u8 id)
{
	struct zl3073x_dpll_pin *pin;

	pin = kzalloc_obj(*pin);
	if (!pin)
		return ERR_PTR(-ENOMEM);

	pin->dpll = zldpll;
	pin->dir = dir;
	pin->id = id;

	return pin;
}

/**
 * zl3073x_dpll_pin_free - deallocate DPLL pin
 * @pin: pin to free
 *
 * Deallocates DPLL pin previously allocated by @zl3073x_dpll_pin_alloc.
 */
static void
zl3073x_dpll_pin_free(struct zl3073x_dpll_pin *pin)
{
	WARN(pin->dpll_pin, "DPLL pin is still registered\n");

	kfree(pin);
}

/**
 * zl3073x_dpll_pin_register - register DPLL pin
 * @pin: pointer to DPLL pin
 * @index: absolute pin index for registration
 *
 * Registers given DPLL pin into DPLL sub-system.
 *
 * Return: 0 on success, <0 on error
 */
static int
zl3073x_dpll_pin_register(struct zl3073x_dpll_pin *pin, u32 index)
{
	struct zl3073x_dpll *zldpll = pin->dpll;
	struct zl3073x_pin_props *props;
	const struct dpll_pin_ops *ops;
	int rc;

	/* Get pin properties */
	props = zl3073x_pin_props_get(zldpll->dev, pin->dir, pin->id);
	if (IS_ERR(props))
		return PTR_ERR(props);

	/* Save package label, fwnode, esync capability and phase adjust
	 * granularity.
	 */
	strscpy(pin->label, props->package_label);
	pin->fwnode = fwnode_handle_get(props->fwnode);
	pin->esync_control = props->esync_control;
	pin->phase_gran = props->dpll_props.phase_gran;

	if (zl3073x_dpll_is_input_pin(pin)) {
		const struct zl3073x_chan *chan;
		u8 ref;

		chan = zl3073x_chan_state_get(zldpll->dev, zldpll->id);
		ref = zl3073x_input_pin_ref_get(pin->id);
		pin->prio = zl3073x_chan_ref_prio_get(chan, ref);

		if (pin->prio == ZL_DPLL_REF_PRIO_NONE)
			/* Clamp prio to max value */
			pin->prio = ZL_DPLL_REF_PRIO_MAX;
	}

	/* Create or get existing DPLL pin */
	pin->dpll_pin = dpll_pin_get(zldpll->dev->clock_id, index, THIS_MODULE,
				     &props->dpll_props, &pin->tracker);
	if (IS_ERR(pin->dpll_pin)) {
		rc = PTR_ERR(pin->dpll_pin);
		goto err_pin_get;
	}
	dpll_pin_fwnode_set(pin->dpll_pin, props->fwnode);

	if (zl3073x_dpll_is_input_pin(pin))
		ops = &zl3073x_dpll_input_pin_ops;
	else
		ops = &zl3073x_dpll_output_pin_ops;

	/* Add the pin to the list before registering it with the DPLL core so
	 * that it is findable as a sibling as soon as the core publishes it.
	 */
	mutex_lock(&zldpll->lock);
	list_add(&pin->list, &zldpll->pins);
	mutex_unlock(&zldpll->lock);

	/* Register the pin */
	rc = dpll_pin_register(zldpll->dpll_dev, pin->dpll_pin, ops, pin);
	if (rc)
		goto err_register;

	/* Free pin properties */
	zl3073x_pin_props_put(props);

	return 0;

err_register:
	mutex_lock(&zldpll->lock);
	list_del(&pin->list);
	mutex_unlock(&zldpll->lock);
	dpll_pin_put(pin->dpll_pin, &pin->tracker);
err_pin_get:
	pin->dpll_pin = NULL;
	fwnode_handle_put(pin->fwnode);
	pin->fwnode = NULL;
	zl3073x_pin_props_put(props);

	return rc;
}

/**
 * zl3073x_dpll_pin_unregister - unregister DPLL pin
 * @pin: pointer to DPLL pin
 *
 * Unregisters pin previously registered by @zl3073x_dpll_pin_register.
 */
static void
zl3073x_dpll_pin_unregister(struct zl3073x_dpll_pin *pin)
{
	struct zl3073x_dpll *zldpll = pin->dpll;
	const struct dpll_pin_ops *ops;

	WARN(!pin->dpll_pin, "DPLL pin is not registered\n");

	if (zl3073x_dpll_is_nco_pin(pin))
		ops = &zl3073x_dpll_nco_pin_ops;
	else if (zl3073x_dpll_is_input_pin(pin))
		ops = &zl3073x_dpll_input_pin_ops;
	else
		ops = &zl3073x_dpll_output_pin_ops;

	/* Unregister the pin */
	dpll_pin_unregister(zldpll->dpll_dev, pin->dpll_pin, ops, pin);

	/* Remove the pin from the list only after it has been unregistered so
	 * that a still-registered pin is always findable as a sibling.
	 */
	mutex_lock(&zldpll->lock);
	list_del(&pin->list);
	mutex_unlock(&zldpll->lock);

	dpll_pin_put(pin->dpll_pin, &pin->tracker);
	pin->dpll_pin = NULL;

	fwnode_handle_put(pin->fwnode);
	pin->fwnode = NULL;
}

/**
 * zl3073x_dpll_pins_unregister - unregister all registered DPLL pins
 * @zldpll: pointer to zl3073x_dpll structure
 *
 * Enumerates all DPLL pins registered to given DPLL device and
 * unregisters them.
 */
static void
zl3073x_dpll_pins_unregister(struct zl3073x_dpll *zldpll)
{
	struct zl3073x_dpll_pin *pin, *next;

	/* Unregister each pin before removing it from the list so that a
	 * still-registered pin is always findable as a sibling.
	 */
	list_for_each_entry_safe(pin, next, &zldpll->pins, list) {
		zl3073x_dpll_pin_unregister(pin);
		zl3073x_dpll_pin_free(pin);
	}
}

/**
 * zl3073x_dpll_pin_is_registrable - check if the pin is registrable
 * @zldpll: pointer to zl3073x_dpll structure
 * @dir: pin direction
 * @index: pin index
 *
 * Checks if the given pin can be registered to given DPLL. For both
 * directions the pin can be registered if it is enabled. In case of
 * differential signal type only P-pin is reported as registrable.
 * And additionally for the output pin, the pin can be registered only
 * if it is connected to synthesizer that is driven by given DPLL.
 *
 * Return: true if the pin is registrable, false if not
 */
static bool
zl3073x_dpll_pin_is_registrable(struct zl3073x_dpll *zldpll,
				enum dpll_pin_direction dir, u8 index)
{
	struct zl3073x_dev *zldev = zldpll->dev;
	bool is_diff, is_enabled;
	const char *name;

	if (dir == DPLL_PIN_DIRECTION_INPUT) {
		u8 ref_id = zl3073x_input_pin_ref_get(index);
		const struct zl3073x_ref *ref;

		name = "REF";
		ref = zl3073x_ref_state_get(zldev, ref_id);
		is_diff = zl3073x_ref_is_diff(ref);
		is_enabled = zl3073x_ref_is_enabled(ref);
	} else {
		/* Output P&N pair shares single HW output */
		u8 out = zl3073x_output_pin_out_get(index);

		/* Skip the pin if it is connected to different DPLL channel */
		if (zl3073x_dev_out_dpll_get(zldev, out) != zldpll->id) {
			dev_dbg(zldev->dev,
				"OUT%u is driven by different DPLL\n", out);

			return false;
		}

		name = "OUT";
		is_diff = zl3073x_dev_out_is_diff(zldev, out);
		is_enabled = zl3073x_dev_output_pin_is_enabled(zldev, index);
	}

	/* Skip N-pin if the corresponding input/output is differential */
	if (is_diff && zl3073x_is_n_pin(index)) {
		dev_dbg(zldev->dev, "%s%u is differential, skipping N-pin\n",
			name, index / 2);

		return false;
	}

	/* Skip the pin if it is disabled */
	if (!is_enabled) {
		dev_dbg(zldev->dev, "%s%u%c is disabled\n", name, index / 2,
			zl3073x_is_p_pin(index) ? 'P' : 'N');

		return false;
	}

	return true;
}

static const struct dpll_pin_properties zl3073x_dpll_nco_pin_props = {
	.type = DPLL_PIN_TYPE_INT_NCO,
	.package_label = "NCO",
	.capabilities = DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE,
};

static int
zl3073x_dpll_nco_pin_register(struct zl3073x_dpll *zldpll)
{
	struct zl3073x_dpll_pin *pin;
	struct zl3073x_chan chan;
	int rc;

	/* Ensure that ctrl bits are configured for NCO operation:
	 * - nco_auto_read: auto-capture tracking offset on NCO entry
	 * - tod_step_reset: apply negated ToD step on NCO exit
	 * - tie_clear: PPS DPLLs re-align outputs on NCO exit
	 */
	mutex_lock(&zldpll->lock);
	chan = *zl3073x_chan_state_get(zldpll->dev, zldpll->id);
	FIELD_MODIFY(ZL_DPLL_CTRL_NCO_AUTO_READ, &chan.ctrl, 1);
	FIELD_MODIFY(ZL_DPLL_CTRL_TOD_STEP_RST, &chan.ctrl, 1);
	FIELD_MODIFY(ZL_DPLL_CTRL_TIE_CLEAR, &chan.ctrl,
		     zldpll->type == DPLL_TYPE_PPS ? 1 : 0);
	rc = zl3073x_chan_state_set(zldpll->dev, zldpll->id, &chan);
	mutex_unlock(&zldpll->lock);
	if (rc)
		return rc;

	pin = zl3073x_dpll_pin_alloc(zldpll, DPLL_PIN_DIRECTION_INPUT,
				     ZL3073X_NCO_PIN_ID);
	if (IS_ERR(pin))
		return PTR_ERR(pin);

	pin->dpll_pin = dpll_pin_get(zldpll->dev->clock_id, ZL3073X_NCO_PIN_ID,
				     THIS_MODULE, &zl3073x_dpll_nco_pin_props,
				     &pin->tracker);
	if (IS_ERR(pin->dpll_pin)) {
		rc = PTR_ERR(pin->dpll_pin);
		goto err_pin_get;
	}

	/* Add the pin to the list before registering it with the DPLL core so
	 * that a registered pin is always on the list.
	 */
	mutex_lock(&zldpll->lock);
	list_add(&pin->list, &zldpll->pins);
	mutex_unlock(&zldpll->lock);

	rc = dpll_pin_register(zldpll->dpll_dev, pin->dpll_pin,
			       &zl3073x_dpll_nco_pin_ops, pin);
	if (rc)
		goto err_register;

	return 0;

err_register:
	mutex_lock(&zldpll->lock);
	list_del(&pin->list);
	mutex_unlock(&zldpll->lock);
	dpll_pin_put(pin->dpll_pin, &pin->tracker);
err_pin_get:
	pin->dpll_pin = NULL;
	kfree(pin);

	return rc;
}

/**
 * zl3073x_dpll_pins_register - register all registerable DPLL pins
 * @zldpll: pointer to zl3073x_dpll structure
 *
 * Enumerates all possible input/output pins and registers all of them
 * that are registrable.
 *
 * Return: 0 on success, <0 on error
 */
static int
zl3073x_dpll_pins_register(struct zl3073x_dpll *zldpll)
{
	struct zl3073x_dpll_pin *pin;
	enum dpll_pin_direction dir;
	u8 id, index;
	int rc;

	/* Process input pins */
	for (index = 0; index < ZL3073X_NUM_PINS; index++) {
		/* First input pins and then output pins */
		if (index < ZL3073X_NUM_INPUT_PINS) {
			id = index;
			dir = DPLL_PIN_DIRECTION_INPUT;
		} else {
			id = index - ZL3073X_NUM_INPUT_PINS;
			dir = DPLL_PIN_DIRECTION_OUTPUT;
		}

		/* Check if the pin registrable to this DPLL */
		if (!zl3073x_dpll_pin_is_registrable(zldpll, dir, id))
			continue;

		pin = zl3073x_dpll_pin_alloc(zldpll, dir, id);
		if (IS_ERR(pin)) {
			rc = PTR_ERR(pin);
			goto error;
		}

		rc = zl3073x_dpll_pin_register(pin, index);
		if (rc) {
			zl3073x_dpll_pin_free(pin);
			goto error;
		}
	}

	/* Register NCO virtual input pin */
	rc = zl3073x_dpll_nco_pin_register(zldpll);
	if (rc)
		goto error;

	return 0;

error:
	zl3073x_dpll_pins_unregister(zldpll);

	return rc;
}

/**
 * zl3073x_dpll_device_register - register DPLL device
 * @zldpll: pointer to zl3073x_dpll structure
 *
 * Registers given DPLL device into DPLL sub-system.
 *
 * Return: 0 on success, <0 on error
 */
static int
zl3073x_dpll_device_register(struct zl3073x_dpll *zldpll)
{
	struct zl3073x_dev *zldev = zldpll->dev;
	int rc;

	zldpll->ops = zl3073x_dpll_device_ops;
	if (zldev->info->flags & ZL3073X_FLAG_DIE_TEMP)
		zldpll->ops.temp_get = zl3073x_dpll_temp_get;

	zldpll->dpll_dev = dpll_device_get(zldev->clock_id, zldpll->id,
					   THIS_MODULE, &zldpll->tracker);
	if (IS_ERR(zldpll->dpll_dev)) {
		rc = PTR_ERR(zldpll->dpll_dev);
		zldpll->dpll_dev = NULL;

		return rc;
	}

	zldpll->type = zl3073x_prop_dpll_type_get(zldev, zldpll->id);
	rc = dpll_device_register(zldpll->dpll_dev, zldpll->type,
				  &zldpll->ops, zldpll);
	if (rc) {
		dpll_device_put(zldpll->dpll_dev, &zldpll->tracker);
		zldpll->dpll_dev = NULL;
	}

	return rc;
}

/**
 * zl3073x_dpll_device_unregister - unregister DPLL device
 * @zldpll: pointer to zl3073x_dpll structure
 *
 * Unregisters given DPLL device from DPLL sub-system previously registered
 * by @zl3073x_dpll_device_register.
 */
static void
zl3073x_dpll_device_unregister(struct zl3073x_dpll *zldpll)
{
	struct dpll_device *dpll_dev = READ_ONCE(zldpll->dpll_dev);

	WARN(!dpll_dev, "DPLL device is not registered\n");

	WRITE_ONCE(zldpll->dpll_dev, NULL);
	dpll_device_unregister(dpll_dev, &zldpll->ops, zldpll);
	dpll_device_put(dpll_dev, &zldpll->tracker);
}

/**
 * zl3073x_dpll_pin_phase_offset_check - check for pin phase offset change
 * @pin: pin to check
 *
 * Check for the change of DPLL to connected pin phase offset change.
 *
 * Return: true on phase offset change, false otherwise
 */
static bool
zl3073x_dpll_pin_phase_offset_check(struct zl3073x_dpll_pin *pin)
{
	struct zl3073x_dpll *zldpll = pin->dpll;
	struct zl3073x_dev *zldev = zldpll->dev;
	unsigned int reg;
	s64 phase_offset;
	u8 ref_id;
	int rc;

	lockdep_assert_held(&zldpll->lock);

	/* No phase offset if the ref monitor reports signal errors */
	ref_id = zl3073x_input_pin_ref_get(pin->id);
	if (!zl3073x_dev_ref_is_status_ok(zldev, ref_id))
		return false;

	/* Select register to read phase offset value depending on pin and
	 * phase monitor state:
	 * 1) For connected pin use dpll_phase_err_data register
	 * 2) For other pins use appropriate ref_phase register if the phase
	 *    monitor feature is enabled.
	 */
	if (pin->operstate == DPLL_PIN_OPERSTATE_ACTIVE)
		reg = ZL_REG_DPLL_PHASE_ERR_DATA(zldpll->id);
	else if (zldpll->phase_monitor)
		reg = ZL_REG_REF_PHASE(ref_id);
	else
		return false;

	/* Read measured phase offset value */
	rc = zl3073x_read_u48(zldev, reg, &phase_offset);
	if (rc) {
		dev_err(zldev->dev, "Failed to read ref phase offset: %pe\n",
			ERR_PTR(rc));

		return false;
	}

	/* Convert to ps */
	phase_offset = div_s64(sign_extend64(phase_offset, 47), 100);

	/* Compare with previous value */
	if (phase_offset != pin->phase_offset) {
		dev_dbg(zldev->dev, "%s phase offset changed: %lld -> %lld\n",
			pin->label, pin->phase_offset, phase_offset);
		pin->phase_offset = phase_offset;

		return true;
	}

	return false;
}

/**
 * zl3073x_dpll_pin_ffo_check - check for FFO change on active pin
 * @pin: pin to check
 *
 * Return: true on change, false otherwise
 */
static bool
zl3073x_dpll_pin_ffo_check(struct zl3073x_dpll_pin *pin)
{
	struct zl3073x_dpll *zldpll = pin->dpll;
	struct zl3073x_dev *zldev = zldpll->dev;
	const struct zl3073x_chan *chan;
	s64 ffo;

	lockdep_assert_held(&zldpll->lock);

	if (pin->operstate != DPLL_PIN_OPERSTATE_ACTIVE)
		return false;

	chan = zl3073x_chan_state_get(zldpll->dev, zldpll->id);
	if (zl3073x_chan_df_offset_get(chan) == ZL_DPLL_DF_OFFSET_UNKNOWN)
		return false;

	/* dpll_df_offset register has inverted sign per datasheet:
	 * f_offset = f_nom * (-df_offset) / 2^48
	 * Input pin FFO is pin-vs-DPLL (opposite of DPLL-vs-reference),
	 * so the two inversions cancel out: ppt = df * 5^12 / 2^36
	 */
	ffo = mul_s64_u64_shr(zl3073x_chan_df_offset_get(chan),
			      244140625, 36);

	if (pin->freq_offset != ffo) {
		dev_dbg(zldev->dev, "%s freq offset changed to: %lld\n",
			pin->label, ffo);
		pin->freq_offset = ffo;
		return true;
	}

	return false;
}

/**
 * zl3073x_dpll_pin_measured_freq_check - check for pin measured frequency
 * change
 * @pin: pin to check
 *
 * Check for the given pin's measured frequency change.
 *
 * Return: true on measured frequency change, false otherwise
 */
static bool
zl3073x_dpll_pin_measured_freq_check(struct zl3073x_dpll_pin *pin)
{
	struct zl3073x_dpll *zldpll = pin->dpll;
	struct zl3073x_dev *zldev = zldpll->dev;
	const struct zl3073x_ref *ref;
	u8 ref_id;
	u32 freq;

	lockdep_assert_held(&zldpll->lock);

	if (!READ_ONCE(zldpll->dev->freq_monitor))
		return false;

	ref_id = zl3073x_input_pin_ref_get(pin->id);
	ref = zl3073x_ref_state_get(zldev, ref_id);

	freq = zl3073x_ref_meas_freq_get(ref);
	if (pin->measured_freq != freq) {
		dev_dbg(zldev->dev, "%s measured freq changed: %u -> %u\n",
			pin->label, pin->measured_freq, freq);
		pin->measured_freq = freq;

		return true;
	}

	return false;
}

/**
 * zl3073x_dpll_changes_check - check for changes and send notifications
 * @zldpll: pointer to zl3073x_dpll structure
 *
 * Checks for changes on given DPLL device and its registered DPLL pins
 * and sends notifications about them.
 *
 * This function is periodically called from @zl3073x_dev_periodic_work.
 */
void
zl3073x_dpll_changes_check(struct zl3073x_dpll *zldpll)
{
	DECLARE_BITMAP(changed_pins, ZL3073X_NUM_INPUT_PINS);
	struct zl3073x_dev *zldev = zldpll->dev;
	enum dpll_lock_status lock_status;
	struct device *dev = zldev->dev;
	struct zl3073x_dpll_pin *pin;
	bool dev_changed = false;
	int rc;

	bitmap_zero(changed_pins, ZL3073X_NUM_INPUT_PINS);

	mutex_lock(&zldpll->lock);

	zldpll->check_count++;

	rc = zl3073x_chan_state_update(zldev, zldpll->id);
	if (rc) {
		dev_err(dev, "Failed to get DPLL%u state: %pe\n",
			zldpll->id, ERR_PTR(rc));
		goto unlock;
	}

	rc = __zl3073x_dpll_lock_status_get(zldpll, &lock_status);
	if (rc) {
		dev_err(dev, "Failed to get DPLL%u lock status: %pe\n",
			zldpll->id, ERR_PTR(rc));
		goto unlock;
	}

	if (zldpll->lock_status != lock_status) {
		zldpll->lock_status = lock_status;
		dev_changed = true;
	}

	/* Update phase offset latch registers for this DPLL if the phase
	 * offset monitor feature is enabled.
	 */
	if (zldpll->phase_monitor) {
		rc = zl3073x_ref_phase_offsets_update(zldev, zldpll->id);
		if (rc) {
			dev_err(zldev->dev,
				"Failed to update phase offsets: %pe\n",
				ERR_PTR(rc));
			goto unlock;
		}
	}

	list_for_each_entry(pin, &zldpll->pins, list) {
		enum dpll_pin_operstate operstate;

		/* Only physical input pins need monitoring */
		if (!zl3073x_dpll_is_input_pin(pin) ||
		    zl3073x_dpll_is_nco_pin(pin))
			continue;

		rc = zl3073x_dpll_ref_operstate_get(pin, &operstate);
		if (rc) {
			dev_err(dev,
				"Failed to get %s on DPLL%u oper state: %pe\n",
				pin->label, zldpll->id, ERR_PTR(rc));
			goto unlock;
		}

		if (operstate != pin->operstate) {
			dev_dbg(dev, "%s oper state changed: %u->%u\n",
				pin->label, pin->operstate, operstate);
			pin->operstate = operstate;
			set_bit(pin->id, changed_pins);
		}

		if (zldpll->check_count % 2 == 0) {
			if (zl3073x_dpll_pin_phase_offset_check(pin))
				set_bit(pin->id, changed_pins);

			if (zl3073x_dpll_pin_ffo_check(pin))
				set_bit(pin->id, changed_pins);

			if (zl3073x_dpll_pin_measured_freq_check(pin))
				set_bit(pin->id, changed_pins);
		}
	}

unlock:
	mutex_unlock(&zldpll->lock);

	/* Send notifications outside the lock to avoid ABBA deadlock
	 * with dpll_lock taken by notification functions.
	 */
	if (dev_changed)
		dpll_device_change_ntf(zldpll->dpll_dev);

	list_for_each_entry(pin, &zldpll->pins, list) {
		if (zl3073x_dpll_is_input_pin(pin) &&
		    !zl3073x_dpll_is_nco_pin(pin) &&
		    test_bit(pin->id, changed_pins))
			dpll_pin_change_ntf(pin->dpll_pin);
	}
}

/**
 * zl3073x_dpll_init_fine_phase_adjust - do initial fine phase adjustments
 * @zldev: pointer to zl3073x device
 *
 * Performs initial fine phase adjustments needed per datasheet.
 *
 * Return: 0 on success, <0 on error
 */
int
zl3073x_dpll_init_fine_phase_adjust(struct zl3073x_dev *zldev)
{
	int rc;

	rc = zl3073x_write_u8(zldev, ZL_REG_SYNTH_PHASE_SHIFT_MASK, 0x1f);
	if (rc)
		return rc;

	rc = zl3073x_write_u8(zldev, ZL_REG_SYNTH_PHASE_SHIFT_INTVL, 0x01);
	if (rc)
		return rc;

	rc = zl3073x_write_u16(zldev, ZL_REG_SYNTH_PHASE_SHIFT_DATA, 0xffff);
	if (rc)
		return rc;

	return zl3073x_write_u8(zldev, ZL_REG_SYNTH_PHASE_SHIFT_CTRL, 0x01);
}

/* Maximum frequency adjustment: +-1% of nominal in ppb */
#define ZL3073X_DPLL_PTP_MAX_ADJ	10000000

/**
 * zl3073x_dpll_ptp_gettimex64 - read current time from ToD counters
 * @info: PTP clock info
 * @ts: timespec to store current time
 * @sts: optional system timestamp pair for cross-timestamping
 *
 * Return: 0 on success, <0 on error
 */
static int zl3073x_dpll_ptp_gettimex64(struct ptp_clock_info *info,
				       struct timespec64 *ts,
				       struct ptp_system_timestamp *sts)
{
	struct zl3073x_dpll *zldpll = container_of(info, struct zl3073x_dpll,
						   ptp_info);

	guard(mutex)(&zldpll->lock);

	return zl3073x_chan_tod_read(zldpll->dev, zldpll->id, false, ts, sts);
}

/**
 * zl3073x_dpll_ptp_settime64 - set ToD counters to given time
 * @info: PTP clock info
 * @ts: timespec with time to set
 *
 * Return: 0 on success, <0 on error
 */
static int zl3073x_dpll_ptp_settime64(struct ptp_clock_info *info,
				      const struct timespec64 *ts)
{
	struct zl3073x_dpll *zldpll = container_of(info, struct zl3073x_dpll,
						   ptp_info);

	guard(mutex)(&zldpll->lock);

	return zl3073x_chan_tod_write(zldpll->dev, zldpll->id, *ts);
}

/**
 * zl3073x_dpll_ptp_adjtime_phase_step - adjust sub-second time via phase step
 * @zldpll: DPLL channel
 * @delta: time adjustment in nanoseconds (must be within (-NSEC_PER_SEC,
 *         NSEC_PER_SEC))
 *
 * Uses the output phase step mechanism with tod_step=1 to adjust both
 * the output clock phase and the ToD counter simultaneously. This keeps
 * outputs and ToD coherent. Only valid for NCO.
 *
 * Outputs are grouped by synthesizer since the phase step value is in
 * synthesizer clock cycles. The first synth group with enabled outputs
 * uses tod_step to adjust both outputs and the ToD counter. Remaining
 * groups step outputs only. If no synth has enabled outputs, the ToD
 * counter is stepped alone using an empty output mask (the FW uses
 * the first enabled synth's period for the conversion).
 *
 * Return:
 * * %0			- success (or partial success if a later synth group
 *			  failed after the first was already stepped)
 * * %-EOPNOTSUPP	- no synths available
 * * negative		- error
 */
static int zl3073x_dpll_ptp_adjtime_phase_step(struct zl3073x_dpll *zldpll,
					       s64 delta)
{
	u16 synth_mask[ZL3073X_NUM_SYNTHS] = {};
	struct zl3073x_dev *zldev = zldpll->dev;
	const struct zl3073x_synth *synth;
	struct zl3073x_dpll_pin *pin;
	u32 first_synth_freq = 0;
	bool tod_stepped = false;
	s32 step_cycles;
	u32 synth_freq;
	int rc;
	u8 i;

	/* Build per-synth output masks from registered output pins */
	list_for_each_entry(pin, &zldpll->pins, list) {
		u8 out_id, synth_id;

		if (zl3073x_dpll_is_input_pin(pin))
			continue;

		out_id = zl3073x_output_pin_out_get(pin->id);

		if (!zl3073x_dev_out_is_stepped(zldev, out_id))
			continue;

		synth_id = zl3073x_dev_out_synth_get(zldev, out_id);
		if (synth_id >= ZL3073X_NUM_SYNTHS) {
			dev_warn(zldev->dev, "Unexpected synth id for OUT%u\n",
				 out_id);
			continue;
		}
		synth_mask[synth_id] |= BIT(out_id);
	}

	/* Process each synth group */
	for (i = 0; i < ZL3073X_NUM_SYNTHS; i++) {
		synth = zl3073x_synth_state_get(zldev, i);
		if (!zl3073x_synth_is_enabled(synth) ||
		    zl3073x_synth_dpll_get(synth) != zldpll->id)
			continue;

		synth_freq = zl3073x_synth_freq_get(synth);

		/* Remember first enabled synth freq for ToD-only fallback */
		if (!first_synth_freq)
			first_synth_freq = synth_freq;

		if (!synth_mask[i])
			continue;

		/* Safe for s32: max synth freq is 750 MHz */
		step_cycles = div_s64(delta * synth_freq, NSEC_PER_SEC);

		rc = zl3073x_chan_phase_step(zldev, zldpll->id,
					     synth_mask[i], step_cycles,
					     !tod_stepped);
		if (rc) {
			if (tod_stepped) {
				dev_warn(zldev->dev,
					 "Partial phase step failure\n");
				return 0;
			}
			return rc;
		}
		tod_stepped = true;
	}

	if (!first_synth_freq)
		return -EOPNOTSUPP;

	/* No enabled outputs found; step ToD counter only using the
	 * first enabled synth's period (empty output mask).
	 */
	if (!tod_stepped) {
		step_cycles = div_s64(delta * first_synth_freq, NSEC_PER_SEC);
		return zl3073x_chan_phase_step(zldev, zldpll->id, 0,
					       step_cycles, true);
	}

	return 0;
}

/**
 * zl3073x_dpll_ptp_adjtime - adjust PTP clock time
 * @info: PTP clock info
 * @delta: time adjustment in nanoseconds
 *
 * For NCO, large deltas (>= 1 second) are split into a ToD
 * read-modify-write for the seconds part and an output phase step for
 * the sub-second remainder. Sub-second deltas use phase step directly,
 * falling back to ToD read-modify-write if phase step or TIE write
 * fails. In AUTO/REFLOCK modes, large deltas are split into ToD
 * read-modify-write for seconds and TIE write for the sub-second
 * remainder. Sub-second deltas use TIE write directly.
 *
 * If the seconds part was already committed when the sub-second
 * mechanism fails, returns 0 to prevent the PTP servo from retrying
 * the full delta and applying seconds again.
 *
 * Return: 0 on success (or partial success), <0 on error
 */
static int zl3073x_dpll_ptp_adjtime(struct ptp_clock_info *info, s64 delta)
{
	struct zl3073x_dpll *zldpll = container_of(info, struct zl3073x_dpll,
						   ptp_info);
	struct zl3073x_dev *zldev = zldpll->dev;
	const struct zl3073x_chan *chan;
	bool sec_adjusted = false;
	struct timespec64 ts;
	int rc;

	if (!delta)
		return 0;

	guard(mutex)(&zldpll->lock);

	/* Modes without phase step or TIE use plain ToD adjust */
	chan = zl3073x_chan_state_get(zldev, zldpll->id);
	if (!zl3073x_chan_mode_is_nco(chan) &&
	    !zl3073x_chan_mode_supports_tie(chan))
		return zl3073x_chan_tod_adjust(zldev, zldpll->id,
					       ns_to_timespec64(delta));

	/* Split off seconds via ToD read-modify-write so the sub-second
	 * remainder can be applied through the output-coherent mechanism
	 * (phase step or TIE write).
	 */
	if (delta >= NSEC_PER_SEC || delta <= -NSEC_PER_SEC) {
		s32 remainder;

		ts.tv_sec = div_s64_rem(delta, NSEC_PER_SEC, &remainder);
		ts.tv_nsec = 0;
		delta = remainder;

		rc = zl3073x_chan_tod_adjust(zldev, zldpll->id, ts);
		if (rc)
			return rc;

		/* No sub-second remainder, done */
		if (!delta)
			return 0;

		/* Wait for the ToD write to be applied at the 1 Hz edge
		 * before issuing phase step or TIE write, so the pending
		 * WR_NEXT_1HZ does not overwrite the sub-second adjustment.
		 */
		rc = zl3073x_chan_tod_ready_wait(zldev, zldpll->id);
		if (rc)
			return rc;

		sec_adjusted = true;
	}

	/* Apply sub-second delta via phase step (NCO) or TIE write */
	if (zl3073x_chan_mode_is_nco(chan)) {
		rc = zl3073x_dpll_ptp_adjtime_phase_step(zldpll, delta);
		if (!rc)
			return 0;
	} else {
		rc = zl3073x_chan_tie_write(zldev, zldpll->id, delta);
		if (!rc)
			return 0;
	}

	/* Phase step or TIE write failed, fall back to ToD adjust */
	rc = zl3073x_chan_tod_adjust(zldev, zldpll->id,
				     ns_to_timespec64(delta));

	/* In the unlikely event that both phase step/TIE write and fallback
	 * ToD adjust fail after seconds were already committed, return
	 * success to prevent the PTP servo from retrying the full delta and
	 * applying seconds again. The sub-second residual will self-correct
	 * in the next servo cycle.
	 */
	if (rc && sec_adjusted) {
		dev_warn(zldev->dev,
			 "Sub-second adjustment failed after seconds applied\n");
		return 0;
	}

	return rc;
}

/**
 * zl3073x_dpll_ptp_adjfine - adjust PTP clock frequency
 * @info: PTP clock info
 * @scaled_ppm: frequency adjustment in scaled ppm (ppm * 2^16)
 *
 * Only supported for NCO. Writes the delta frequency offset register.
 *
 * Return:
 * * %0			- success or @scaled_ppm is zero (no-op)
 * * %-EOPNOTSUPP	- NCO pin is not connected and @scaled_ppm is non-zero
 * * negative		- other error
 */
static int
zl3073x_dpll_ptp_adjfine(struct ptp_clock_info *info, long scaled_ppm)
{
	struct zl3073x_dpll *zldpll = container_of(info, struct zl3073x_dpll,
						   ptp_info);
	const struct zl3073x_chan *chan;
	s64 offset;

	/* Convert scaled_ppm to df_offset in 2^-48 steps:
	 *   df_offset = -(scaled_ppm * 2^32) / 10^6
	 *
	 * Simplify to avoid overflow:
	 *   df_offset = -(scaled_ppm * 2^26) / 5^6
	 *   df_offset = -(scaled_ppm * 67108864) / 15625
	 */
	offset = -div_s64((s64)scaled_ppm * 67108864LL, 15625);

	guard(mutex)(&zldpll->lock);

	chan = zl3073x_chan_state_get(zldpll->dev, zldpll->id);
	if (!zl3073x_chan_mode_is_nco(chan))
		return scaled_ppm ? -EOPNOTSUPP : 0;
	if (offset == chan->df_offset)
		return 0;

	return zl3073x_chan_df_offset_set(zldpll->dev, zldpll->id, offset);
}

/**
 * zl3073x_dpll_ptp_adjphase - adjust PTP clock phase
 * @info: PTP clock info
 * @delta: phase adjustment in nanoseconds
 *
 * Only supported in AUTO and REFLOCK modes. Uses TIE write for
 * nanosecond resolution phase adjustment.
 *
 * Return:
 * * %0			- success or @delta is zero (no-op)
 * * %-EOPNOTSUPP	- mode does not support TIE and @delta is non-zero
 * * negative		- other error
 */
static int zl3073x_dpll_ptp_adjphase(struct ptp_clock_info *info, s32 delta)
{
	struct zl3073x_dpll *zldpll = container_of(info, struct zl3073x_dpll,
						   ptp_info);
	struct zl3073x_dev *zldev = zldpll->dev;
	const struct zl3073x_chan *chan;

	if (!delta)
		return 0;

	guard(mutex)(&zldpll->lock);

	chan = zl3073x_chan_state_get(zldev, zldpll->id);

	if (!zl3073x_chan_mode_supports_tie(chan))
		return -EOPNOTSUPP;

	return zl3073x_chan_tie_write(zldev, zldpll->id, delta);
}

static s32
zl3073x_dpll_ptp_getmaxphase(struct ptp_clock_info *info __always_unused)
{
	/* HW limits TIE write to +-1 second. Return the constant HW
	 * limit and let adjphase handle mode-specific checks.
	 */
	return NSEC_PER_SEC - 1;
}

static const struct ptp_clock_info zl3073x_dpll_ptp_clock_info = {
	.owner		= THIS_MODULE,
	.max_adj	= ZL3073X_DPLL_PTP_MAX_ADJ,
	.gettimex64	= zl3073x_dpll_ptp_gettimex64,
	.settime64	= zl3073x_dpll_ptp_settime64,
	.adjtime	= zl3073x_dpll_ptp_adjtime,
	.adjfine	= zl3073x_dpll_ptp_adjfine,
	.adjphase	= zl3073x_dpll_ptp_adjphase,
	.getmaxphase	= zl3073x_dpll_ptp_getmaxphase,
};

/**
 * zl3073x_dpll_ptp_register - register PTP clock for a DPLL channel
 * @zldpll: DPLL channel to register PTP clock for
 *
 * Return: 0 on success, <0 on error
 */
static int zl3073x_dpll_ptp_register(struct zl3073x_dpll *zldpll)
{
	struct zl3073x_dev *zldev = zldpll->dev;
	struct ptp_clock *ptp_clock;

	zldpll->ptp_info = zl3073x_dpll_ptp_clock_info;
	snprintf(zldpll->ptp_info.name, sizeof(zldpll->ptp_info.name),
		 "%s-dpll%u", dev_name(zldev->dev), zldpll->id);

	ptp_clock = ptp_clock_register(&zldpll->ptp_info, zldev->dev);
	if (IS_ERR(ptp_clock)) {
		dev_err(zldev->dev, "Failed to register PTP clock for DPLL%u\n",
			zldpll->id);
		return PTR_ERR(ptp_clock);
	}

	zldpll->ptp_clock = ptp_clock;

	return 0;
}

/**
 * zl3073x_dpll_ptp_unregister - unregister PTP clock for a DPLL channel
 * @zldpll: DPLL channel to unregister PTP clock for
 */
static void zl3073x_dpll_ptp_unregister(struct zl3073x_dpll *zldpll)
{
	if (!IS_ERR_OR_NULL(zldpll->ptp_clock)) {
		ptp_clock_unregister(zldpll->ptp_clock);
		zldpll->ptp_clock = NULL;
	}
}

/**
 * zl3073x_dpll_ref_sync_pair_register - register ref_sync pairs for a pin
 * @pin: pointer to zl3073x_dpll_pin structure
 *
 * Iterates 'ref-sync-sources' phandles in the pin's firmware node and
 * registers each declared pairing.
 *
 * Return: 0 on success, <0 on error
 */
static int
zl3073x_dpll_ref_sync_pair_register(struct zl3073x_dpll_pin *pin)
{
	struct zl3073x_dev *zldev = pin->dpll->dev;
	struct fwnode_handle *fwnode;
	struct dpll_pin *sync_pin;
	dpll_tracker tracker;
	int n, rc;

	for (n = 0; ; n++) {
		/* Get n'th ref-sync source */
		fwnode = fwnode_find_reference(pin->fwnode, "ref-sync-sources",
					       n);
		if (IS_ERR(fwnode)) {
			rc = PTR_ERR(fwnode);
			break;
		}

		/* Find associated dpll pin */
		sync_pin = fwnode_dpll_pin_find(fwnode, &tracker);
		fwnode_handle_put(fwnode);
		if (!sync_pin) {
			dev_warn(zldev->dev, "%s: ref-sync source %d not found",
				 pin->label, n);
			continue;
		}

		/* Register new ref-sync pair */
		rc = dpll_pin_ref_sync_pair_add(pin->dpll_pin, sync_pin);
		dpll_pin_put(sync_pin, &tracker);

		/* -EBUSY means pairing already exists from another DPLL's
		 * registration.
		 */
		if (rc && rc != -EBUSY) {
			dev_err(zldev->dev,
				"%s: failed to add ref-sync source %d: %pe",
				pin->label, n, ERR_PTR(rc));
			break;
		}
	}

	return rc != -ENOENT ? rc : 0;
}

/**
 * zl3073x_dpll_ref_sync_pairs_register - register ref_sync pairs for a DPLL
 * @zldpll: pointer to zl3073x_dpll structure
 *
 * Iterates all registered input pins of the given DPLL and establishes
 * ref_sync pairings declared by 'ref-sync-sources' phandles in the
 * device tree.
 *
 * Return: 0 on success, <0 on error
 */
static int
zl3073x_dpll_ref_sync_pairs_register(struct zl3073x_dpll *zldpll)
{
	struct zl3073x_dpll_pin *pin;
	int rc;

	list_for_each_entry(pin, &zldpll->pins, list) {
		if (!zl3073x_dpll_is_input_pin(pin) || !pin->fwnode)
			continue;

		rc = zl3073x_dpll_ref_sync_pair_register(pin);
		if (rc)
			return rc;
	}

	return 0;
}

/**
 * zl3073x_dpll_alloc - allocate DPLL device
 * @zldev: pointer to zl3073x device
 * @ch: DPLL channel number
 *
 * Allocates DPLL device structure for given DPLL channel.
 *
 * Return: pointer to DPLL device on success, error pointer on error
 */
struct zl3073x_dpll *
zl3073x_dpll_alloc(struct zl3073x_dev *zldev, u8 ch)
{
	struct zl3073x_dpll *zldpll;

	zldpll = kzalloc_obj(*zldpll);
	if (!zldpll)
		return ERR_PTR(-ENOMEM);

	zldpll->dev = zldev;
	zldpll->id = ch;
	mutex_init(&zldpll->lock);
	INIT_LIST_HEAD(&zldpll->pins);

	return zldpll;
}

/**
 * zl3073x_dpll_free - free DPLL device
 * @zldpll: pointer to zl3073x_dpll structure
 *
 * Deallocates given DPLL device previously allocated by @zl3073x_dpll_alloc.
 */
void
zl3073x_dpll_free(struct zl3073x_dpll *zldpll)
{
	WARN(zldpll->dpll_dev, "DPLL device is still registered\n");

	mutex_destroy(&zldpll->lock);
	kfree(zldpll);
}

/**
 * zl3073x_dpll_register - register DPLL device and all its pins
 * @zldpll: pointer to zl3073x_dpll structure
 *
 * Registers given DPLL device and all its pins into DPLL sub-system.
 *
 * Return: 0 on success, <0 on error
 */
int
zl3073x_dpll_register(struct zl3073x_dpll *zldpll)
{
	int rc;

	rc = zl3073x_dpll_device_register(zldpll);
	if (rc)
		return rc;

	rc = zl3073x_dpll_pins_register(zldpll);
	if (rc) {
		zl3073x_dpll_device_unregister(zldpll);
		return rc;
	}

	rc = zl3073x_dpll_ref_sync_pairs_register(zldpll);
	if (rc) {
		zl3073x_dpll_pins_unregister(zldpll);
		zl3073x_dpll_device_unregister(zldpll);
		return rc;
	}

	rc = zl3073x_dpll_ptp_register(zldpll);
	if (rc) {
		zl3073x_dpll_pins_unregister(zldpll);
		zl3073x_dpll_device_unregister(zldpll);
		return rc;
	}

	return 0;
}

/**
 * zl3073x_dpll_unregister - unregister DPLL device and its pins
 * @zldpll: pointer to zl3073x_dpll structure
 *
 * Unregisters given DPLL device and all its pins from DPLL sub-system
 * previously registered by @zl3073x_dpll_register.
 */
void
zl3073x_dpll_unregister(struct zl3073x_dpll *zldpll)
{
	zl3073x_dpll_ptp_unregister(zldpll);
	zl3073x_dpll_pins_unregister(zldpll);
	zl3073x_dpll_device_unregister(zldpll);
}