// SPDX-License-Identifier: GPL-2.0
/*
 * STMicroelectronics STUSB160x Type-C controller family driver
 *
 * Copyright (C) 2020, STMicroelectronics
 * Author(s): Amelie Delaunay <amelie.delaunay@st.com>
 */

#include <linux/bitfield.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/usb/role.h>
#include <linux/usb/typec.h>

#define STUSB160X_ALERT_STATUS			0x0B /* RC */
#define STUSB160X_ALERT_STATUS_MASK_CTRL	0x0C /* RW */
#define STUSB160X_CC_CONNECTION_STATUS_TRANS	0x0D /* RC */
#define STUSB160X_CC_CONNECTION_STATUS		0x0E /* RO */
#define STUSB160X_MONITORING_STATUS_TRANS	0x0F /* RC */
#define STUSB160X_MONITORING_STATUS		0x10 /* RO */
#define STUSB160X_CC_OPERATION_STATUS		0x11 /* RO */
#define STUSB160X_HW_FAULT_STATUS_TRANS		0x12 /* RC */
#define STUSB160X_HW_FAULT_STATUS		0x13 /* RO */
#define STUSB160X_CC_CAPABILITY_CTRL		0x18 /* RW */
#define STUSB160X_CC_VCONN_SWITCH_CTRL		0x1E /* RW */
#define STUSB160X_VCONN_MONITORING_CTRL		0x20 /* RW */
#define STUSB160X_VBUS_MONITORING_RANGE_CTRL	0x22 /* RW */
#define STUSB160X_RESET_CTRL			0x23 /* RW */
#define STUSB160X_VBUS_DISCHARGE_TIME_CTRL	0x25 /* RW */
#define STUSB160X_VBUS_DISCHARGE_STATUS		0x26 /* RO */
#define STUSB160X_VBUS_ENABLE_STATUS		0x27 /* RO */
#define STUSB160X_CC_POWER_MODE_CTRL		0x28 /* RW */
#define STUSB160X_VBUS_MONITORING_CTRL		0x2E /* RW */
#define STUSB1600_REG_MAX			0x2F /* RO - Reserved */

/* STUSB160X_ALERT_STATUS/STUSB160X_ALERT_STATUS_MASK_CTRL bitfields */
#define STUSB160X_HW_FAULT			BIT(4)
#define STUSB160X_MONITORING			BIT(5)
#define STUSB160X_CC_CONNECTION			BIT(6)
#define STUSB160X_ALL_ALERTS			GENMASK(6, 4)

/* STUSB160X_CC_CONNECTION_STATUS_TRANS bitfields */
#define STUSB160X_CC_ATTACH_TRANS		BIT(0)

/* STUSB160X_CC_CONNECTION_STATUS bitfields */
#define STUSB160X_CC_ATTACH			BIT(0)
#define STUSB160X_CC_VCONN_SUPPLY		BIT(1)
#define STUSB160X_CC_DATA_ROLE(s)		(!!((s) & BIT(2)))
#define STUSB160X_CC_POWER_ROLE(s)		(!!((s) & BIT(3)))
#define STUSB160X_CC_ATTACHED_MODE		GENMASK(7, 5)

/* STUSB160X_MONITORING_STATUS_TRANS bitfields */
#define STUSB160X_VCONN_PRESENCE_TRANS		BIT(0)
#define STUSB160X_VBUS_PRESENCE_TRANS		BIT(1)
#define STUSB160X_VBUS_VSAFE0V_TRANS		BIT(2)
#define STUSB160X_VBUS_VALID_TRANS		BIT(3)

/* STUSB160X_MONITORING_STATUS bitfields */
#define STUSB160X_VCONN_PRESENCE		BIT(0)
#define STUSB160X_VBUS_PRESENCE			BIT(1)
#define STUSB160X_VBUS_VSAFE0V			BIT(2)
#define STUSB160X_VBUS_VALID			BIT(3)

/* STUSB160X_CC_OPERATION_STATUS bitfields */
#define STUSB160X_TYPEC_FSM_STATE		GENMASK(4, 0)
#define STUSB160X_SINK_POWER_STATE		GENMASK(6, 5)
#define STUSB160X_CC_ATTACHED			BIT(7)

/* STUSB160X_HW_FAULT_STATUS_TRANS bitfields */
#define STUSB160X_VCONN_SW_OVP_FAULT_TRANS	BIT(0)
#define STUSB160X_VCONN_SW_OCP_FAULT_TRANS	BIT(1)
#define STUSB160X_VCONN_SW_RVP_FAULT_TRANS	BIT(2)
#define STUSB160X_VPU_VALID_TRANS		BIT(4)
#define STUSB160X_VPU_OVP_FAULT_TRANS		BIT(5)
#define STUSB160X_THERMAL_FAULT			BIT(7)

/* STUSB160X_HW_FAULT_STATUS bitfields */
#define STUSB160X_VCONN_SW_OVP_FAULT_CC2	BIT(0)
#define STUSB160X_VCONN_SW_OVP_FAULT_CC1	BIT(1)
#define STUSB160X_VCONN_SW_OCP_FAULT_CC2	BIT(2)
#define STUSB160X_VCONN_SW_OCP_FAULT_CC1	BIT(3)
#define STUSB160X_VCONN_SW_RVP_FAULT_CC2	BIT(4)
#define STUSB160X_VCONN_SW_RVP_FAULT_CC1	BIT(5)
#define STUSB160X_VPU_VALID			BIT(6)
#define STUSB160X_VPU_OVP_FAULT			BIT(7)

/* STUSB160X_CC_CAPABILITY_CTRL bitfields */
#define STUSB160X_CC_VCONN_SUPPLY_EN		BIT(0)
#define STUSB160X_CC_VCONN_DISCHARGE_EN		BIT(4)
#define STUSB160X_CC_CURRENT_ADVERTISED		GENMASK(7, 6)

/* STUSB160X_VCONN_SWITCH_CTRL bitfields */
#define STUSB160X_CC_VCONN_SWITCH_ILIM		GENMASK(3, 0)

/* STUSB160X_VCONN_MONITORING_CTRL bitfields */
#define STUSB160X_VCONN_UVLO_THRESHOLD		BIT(6)
#define STUSB160X_VCONN_MONITORING_EN		BIT(7)

/* STUSB160X_VBUS_MONITORING_RANGE_CTRL bitfields */
#define STUSB160X_SHIFT_LOW_VBUS_LIMIT		GENMASK(3, 0)
#define STUSB160X_SHIFT_HIGH_VBUS_LIMIT		GENMASK(7, 4)

/* STUSB160X_RESET_CTRL bitfields */
#define STUSB160X_SW_RESET_EN			BIT(0)

/* STUSB160X_VBUS_DISCHARGE_TIME_CTRL bitfields */
#define STUSBXX02_VBUS_DISCHARGE_TIME_TO_PDO	GENMASK(3, 0)
#define STUSB160X_VBUS_DISCHARGE_TIME_TO_0V	GENMASK(7, 4)

/* STUSB160X_VBUS_DISCHARGE_STATUS bitfields */
#define STUSB160X_VBUS_DISCHARGE_EN		BIT(7)

/* STUSB160X_VBUS_ENABLE_STATUS bitfields */
#define STUSB160X_VBUS_SOURCE_EN		BIT(0)
#define STUSB160X_VBUS_SINK_EN			BIT(1)

/* STUSB160X_CC_POWER_MODE_CTRL bitfields */
#define STUSB160X_CC_POWER_MODE			GENMASK(2, 0)

/* STUSB160X_VBUS_MONITORING_CTRL bitfields */
#define STUSB160X_VDD_UVLO_DISABLE		BIT(0)
#define STUSB160X_VBUS_VSAFE0V_THRESHOLD	GENMASK(2, 1)
#define STUSB160X_VBUS_RANGE_DISABLE		BIT(4)
#define STUSB160X_VDD_OVLO_DISABLE		BIT(6)

enum stusb160x_pwr_mode {
	SOURCE_WITH_ACCESSORY,
	SINK_WITH_ACCESSORY,
	SINK_WITHOUT_ACCESSORY,
	DUAL_WITH_ACCESSORY,
	DUAL_WITH_ACCESSORY_AND_TRY_SRC,
	DUAL_WITH_ACCESSORY_AND_TRY_SNK,
};

enum stusb160x_attached_mode {
	NO_DEVICE_ATTACHED,
	SINK_ATTACHED,
	SOURCE_ATTACHED,
	DEBUG_ACCESSORY_ATTACHED,
	AUDIO_ACCESSORY_ATTACHED,
};

struct stusb160x {
	struct device		*dev;
	struct regmap		*regmap;
	struct regulator	*vdd_supply;
	struct regulator	*vsys_supply;
	struct regulator	*vconn_supply;
	struct regulator	*main_supply;

	struct typec_port	*port;
	struct typec_capability capability;
	struct typec_partner	*partner;

	enum typec_port_type	port_type;
	enum typec_pwr_opmode	pwr_opmode;
	bool			vbus_on;

	struct usb_role_switch	*role_sw;
};

static bool stusb160x_reg_writeable(struct device *dev, unsigned int reg)
{
	switch (reg) {
	case STUSB160X_ALERT_STATUS_MASK_CTRL:
	case STUSB160X_CC_CAPABILITY_CTRL:
	case STUSB160X_CC_VCONN_SWITCH_CTRL:
	case STUSB160X_VCONN_MONITORING_CTRL:
	case STUSB160X_VBUS_MONITORING_RANGE_CTRL:
	case STUSB160X_RESET_CTRL:
	case STUSB160X_VBUS_DISCHARGE_TIME_CTRL:
	case STUSB160X_CC_POWER_MODE_CTRL:
	case STUSB160X_VBUS_MONITORING_CTRL:
		return true;
	default:
		return false;
	}
}

static bool stusb160x_reg_readable(struct device *dev, unsigned int reg)
{
	if (reg <= 0x0A ||
	    (reg >= 0x14 && reg <= 0x17) ||
	    (reg >= 0x19 && reg <= 0x1D) ||
	    (reg >= 0x29 && reg <= 0x2D) ||
	    (reg == 0x1F || reg == 0x21 || reg == 0x24 || reg == 0x2F))
		return false;
	else
		return true;
}

static bool stusb160x_reg_volatile(struct device *dev, unsigned int reg)
{
	switch (reg) {
	case STUSB160X_ALERT_STATUS:
	case STUSB160X_CC_CONNECTION_STATUS_TRANS:
	case STUSB160X_CC_CONNECTION_STATUS:
	case STUSB160X_MONITORING_STATUS_TRANS:
	case STUSB160X_MONITORING_STATUS:
	case STUSB160X_CC_OPERATION_STATUS:
	case STUSB160X_HW_FAULT_STATUS_TRANS:
	case STUSB160X_HW_FAULT_STATUS:
	case STUSB160X_VBUS_DISCHARGE_STATUS:
	case STUSB160X_VBUS_ENABLE_STATUS:
		return true;
	default:
		return false;
	}
}

static bool stusb160x_reg_precious(struct device *dev, unsigned int reg)
{
	switch (reg) {
	case STUSB160X_ALERT_STATUS:
	case STUSB160X_CC_CONNECTION_STATUS_TRANS:
	case STUSB160X_MONITORING_STATUS_TRANS:
	case STUSB160X_HW_FAULT_STATUS_TRANS:
		return true;
	default:
		return false;
	}
}

static const struct regmap_config stusb1600_regmap_config = {
	.reg_bits	= 8,
	.reg_stride	= 1,
	.val_bits	= 8,
	.max_register	= STUSB1600_REG_MAX,
	.writeable_reg	= stusb160x_reg_writeable,
	.readable_reg	= stusb160x_reg_readable,
	.volatile_reg	= stusb160x_reg_volatile,
	.precious_reg	= stusb160x_reg_precious,
	.cache_type	= REGCACHE_RBTREE,
};

static bool stusb160x_get_vconn(struct stusb160x *chip)
{
	u32 val;
	int ret;

	ret = regmap_read(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, &val);
	if (ret) {
		dev_err(chip->dev, "Unable to get Vconn status: %d\n", ret);
		return false;
	}

	return !!FIELD_GET(STUSB160X_CC_VCONN_SUPPLY_EN, val);
}

static int stusb160x_set_vconn(struct stusb160x *chip, bool on)
{
	int ret;

	/* Manage VCONN input supply */
	if (chip->vconn_supply) {
		if (on) {
			ret = regulator_enable(chip->vconn_supply);
			if (ret) {
				dev_err(chip->dev,
					"failed to enable vconn supply: %d\n",
					ret);
				return ret;
			}
		} else {
			regulator_disable(chip->vconn_supply);
		}
	}

	/* Manage VCONN monitoring and power path */
	ret = regmap_update_bits(chip->regmap, STUSB160X_VCONN_MONITORING_CTRL,
				 STUSB160X_VCONN_MONITORING_EN,
				 on ? STUSB160X_VCONN_MONITORING_EN : 0);
	if (ret)
		goto vconn_reg_disable;

	return 0;

vconn_reg_disable:
	if (chip->vconn_supply && on)
		regulator_disable(chip->vconn_supply);

	return ret;
}

static enum typec_pwr_opmode stusb160x_get_pwr_opmode(struct stusb160x *chip)
{
	u32 val;
	int ret;

	ret = regmap_read(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, &val);
	if (ret) {
		dev_err(chip->dev, "Unable to get pwr opmode: %d\n", ret);
		return TYPEC_PWR_MODE_USB;
	}

	return FIELD_GET(STUSB160X_CC_CURRENT_ADVERTISED, val);
}

static enum typec_accessory stusb160x_get_accessory(u32 status)
{
	enum stusb160x_attached_mode mode;

	mode = FIELD_GET(STUSB160X_CC_ATTACHED_MODE, status);

	switch (mode) {
	case DEBUG_ACCESSORY_ATTACHED:
		return TYPEC_ACCESSORY_DEBUG;
	case AUDIO_ACCESSORY_ATTACHED:
		return TYPEC_ACCESSORY_AUDIO;
	default:
		return TYPEC_ACCESSORY_NONE;
	}
}

static enum typec_role stusb160x_get_vconn_role(u32 status)
{
	if (FIELD_GET(STUSB160X_CC_VCONN_SUPPLY, status))
		return TYPEC_SOURCE;

	return TYPEC_SINK;
}

static void stusb160x_set_data_role(struct stusb160x *chip,
				    enum typec_data_role data_role,
				    bool attached)
{
	enum usb_role usb_role = USB_ROLE_NONE;

	if (attached) {
		if (data_role == TYPEC_HOST)
			usb_role = USB_ROLE_HOST;
		else
			usb_role = USB_ROLE_DEVICE;
	}

	usb_role_switch_set_role(chip->role_sw, usb_role);
	typec_set_data_role(chip->port, data_role);
}

static int stusb160x_attach(struct stusb160x *chip, u32 status)
{
	struct typec_partner_desc desc;
	int ret;

	if ((STUSB160X_CC_POWER_ROLE(status) == TYPEC_SOURCE) &&
	    chip->vdd_supply) {
		ret = regulator_enable(chip->vdd_supply);
		if (ret) {
			dev_err(chip->dev,
				"Failed to enable Vbus supply: %d\n", ret);
			return ret;
		}
		chip->vbus_on = true;
	}

	desc.usb_pd = false;
	desc.accessory = stusb160x_get_accessory(status);
	desc.identity = NULL;

	chip->partner = typec_register_partner(chip->port, &desc);
	if (IS_ERR(chip->partner)) {
		ret = PTR_ERR(chip->partner);
		goto vbus_disable;
	}

	typec_set_pwr_role(chip->port, STUSB160X_CC_POWER_ROLE(status));
	typec_set_pwr_opmode(chip->port, stusb160x_get_pwr_opmode(chip));
	typec_set_vconn_role(chip->port, stusb160x_get_vconn_role(status));
	stusb160x_set_data_role(chip, STUSB160X_CC_DATA_ROLE(status), true);

	return 0;

vbus_disable:
	if (chip->vbus_on) {
		regulator_disable(chip->vdd_supply);
		chip->vbus_on = false;
	}

	return ret;
}

static void stusb160x_detach(struct stusb160x *chip, u32 status)
{
	typec_unregister_partner(chip->partner);
	chip->partner = NULL;

	typec_set_pwr_role(chip->port, STUSB160X_CC_POWER_ROLE(status));
	typec_set_pwr_opmode(chip->port, TYPEC_PWR_MODE_USB);
	typec_set_vconn_role(chip->port, stusb160x_get_vconn_role(status));
	stusb160x_set_data_role(chip, STUSB160X_CC_DATA_ROLE(status), false);

	if (chip->vbus_on) {
		regulator_disable(chip->vdd_supply);
		chip->vbus_on = false;
	}
}

static irqreturn_t stusb160x_irq_handler(int irq, void *data)
{
	struct stusb160x *chip = data;
	u32 pending, trans, status;
	int ret;

	ret = regmap_read(chip->regmap, STUSB160X_ALERT_STATUS, &pending);
	if (ret)
		goto err;

	if (pending & STUSB160X_CC_CONNECTION) {
		ret = regmap_read(chip->regmap,
				  STUSB160X_CC_CONNECTION_STATUS_TRANS, &trans);
		if (ret)
			goto err;
		ret = regmap_read(chip->regmap,
				  STUSB160X_CC_CONNECTION_STATUS, &status);
		if (ret)
			goto err;

		if (trans & STUSB160X_CC_ATTACH_TRANS) {
			if (status & STUSB160X_CC_ATTACH) {
				ret = stusb160x_attach(chip, status);
				if (ret)
					goto err;
			} else {
				stusb160x_detach(chip, status);
			}
		}
	}
err:
	return IRQ_HANDLED;
}

static int stusb160x_irq_init(struct stusb160x *chip, int irq)
{
	u32 status;
	int ret;

	ret = regmap_read(chip->regmap,
			  STUSB160X_CC_CONNECTION_STATUS, &status);
	if (ret)
		return ret;

	if (status & STUSB160X_CC_ATTACH) {
		ret = stusb160x_attach(chip, status);
		if (ret)
			dev_err(chip->dev, "attach failed: %d\n", ret);
	}

	ret = devm_request_threaded_irq(chip->dev, irq, NULL,
					stusb160x_irq_handler, IRQF_ONESHOT,
					dev_name(chip->dev), chip);
	if (ret)
		goto partner_unregister;

	/* Unmask CC_CONNECTION events */
	ret = regmap_write_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL,
				STUSB160X_CC_CONNECTION, 0);
	if (ret)
		goto partner_unregister;

	return 0;

partner_unregister:
	if (chip->partner) {
		typec_unregister_partner(chip->partner);
		chip->partner = NULL;
	}

	return ret;
}

static int stusb160x_chip_init(struct stusb160x *chip)
{
	u32 val;
	int ret;

	/* Change the default Type-C power mode */
	if (chip->port_type == TYPEC_PORT_SRC)
		ret = regmap_update_bits(chip->regmap,
					 STUSB160X_CC_POWER_MODE_CTRL,
					 STUSB160X_CC_POWER_MODE,
					 SOURCE_WITH_ACCESSORY);
	else if (chip->port_type == TYPEC_PORT_SNK)
		ret = regmap_update_bits(chip->regmap,
					 STUSB160X_CC_POWER_MODE_CTRL,
					 STUSB160X_CC_POWER_MODE,
					 SINK_WITH_ACCESSORY);
	else /* (chip->port_type == TYPEC_PORT_DRP) */
		ret = regmap_update_bits(chip->regmap,
					 STUSB160X_CC_POWER_MODE_CTRL,
					 STUSB160X_CC_POWER_MODE,
					 DUAL_WITH_ACCESSORY);
	if (ret)
		return ret;

	if (chip->port_type == TYPEC_PORT_SNK)
		goto skip_src;

	/* Change the default Type-C Source power operation mode capability */
	ret = regmap_update_bits(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL,
				 STUSB160X_CC_CURRENT_ADVERTISED,
				 FIELD_PREP(STUSB160X_CC_CURRENT_ADVERTISED,
					    chip->pwr_opmode));
	if (ret)
		return ret;

	/* Manage Type-C Source Vconn supply */
	if (stusb160x_get_vconn(chip)) {
		ret = stusb160x_set_vconn(chip, true);
		if (ret)
			return ret;
	}

skip_src:
	/* Mask all events interrupts - to be unmasked with interrupt support */
	ret = regmap_update_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL,
				 STUSB160X_ALL_ALERTS, STUSB160X_ALL_ALERTS);
	if (ret)
		return ret;

	/* Read status at least once to clear any stale interrupts */
	regmap_read(chip->regmap, STUSB160X_ALERT_STATUS, &val);
	regmap_read(chip->regmap, STUSB160X_CC_CONNECTION_STATUS_TRANS, &val);
	regmap_read(chip->regmap, STUSB160X_MONITORING_STATUS_TRANS, &val);
	regmap_read(chip->regmap, STUSB160X_HW_FAULT_STATUS_TRANS, &val);

	return 0;
}

static int stusb160x_get_fw_caps(struct stusb160x *chip,
				 struct fwnode_handle *fwnode)
{
	const char *cap_str;
	int ret;

	chip->capability.fwnode = fwnode;

	/*
	 * Supported port type can be configured through device tree
	 * else it is read from chip registers in stusb160x_get_caps.
	 */
	ret = fwnode_property_read_string(fwnode, "power-role", &cap_str);
	if (!ret) {
		ret = typec_find_port_power_role(cap_str);
		if (ret < 0)
			return ret;
		chip->port_type = ret;
	}
	chip->capability.type = chip->port_type;

	/* Skip DRP/Source capabilities in case of Sink only */
	if (chip->port_type == TYPEC_PORT_SNK)
		return 0;

	if (chip->port_type == TYPEC_PORT_DRP)
		chip->capability.prefer_role = TYPEC_SINK;

	/*
	 * Supported power operation mode can be configured through device tree
	 * else it is read from chip registers in stusb160x_get_caps.
	 */
	ret = fwnode_property_read_string(fwnode, "typec-power-opmode", &cap_str);
	if (!ret) {
		ret = typec_find_pwr_opmode(cap_str);
		/* Power delivery not yet supported */
		if (ret < 0 || ret == TYPEC_PWR_MODE_PD) {
			dev_err(chip->dev, "bad power operation mode: %d\n", ret);
			return -EINVAL;
		}
		chip->pwr_opmode = ret;
	}

	return 0;
}

static int stusb160x_get_caps(struct stusb160x *chip)
{
	enum typec_port_type *type = &chip->capability.type;
	enum typec_port_data *data = &chip->capability.data;
	enum typec_accessory *accessory = chip->capability.accessory;
	u32 val;
	int ret;

	chip->capability.revision = USB_TYPEC_REV_1_2;

	ret = regmap_read(chip->regmap, STUSB160X_CC_POWER_MODE_CTRL, &val);
	if (ret)
		return ret;

	switch (FIELD_GET(STUSB160X_CC_POWER_MODE, val)) {
	case SOURCE_WITH_ACCESSORY:
		*type = TYPEC_PORT_SRC;
		*data = TYPEC_PORT_DFP;
		*accessory++ = TYPEC_ACCESSORY_AUDIO;
		*accessory++ = TYPEC_ACCESSORY_DEBUG;
		break;
	case SINK_WITH_ACCESSORY:
		*type = TYPEC_PORT_SNK;
		*data = TYPEC_PORT_UFP;
		*accessory++ = TYPEC_ACCESSORY_AUDIO;
		*accessory++ = TYPEC_ACCESSORY_DEBUG;
		break;
	case SINK_WITHOUT_ACCESSORY:
		*type = TYPEC_PORT_SNK;
		*data = TYPEC_PORT_UFP;
		break;
	case DUAL_WITH_ACCESSORY:
	case DUAL_WITH_ACCESSORY_AND_TRY_SRC:
	case DUAL_WITH_ACCESSORY_AND_TRY_SNK:
		*type = TYPEC_PORT_DRP;
		*data = TYPEC_PORT_DRD;
		*accessory++ = TYPEC_ACCESSORY_AUDIO;
		*accessory++ = TYPEC_ACCESSORY_DEBUG;
		break;
	default:
		return -EINVAL;
	}

	chip->port_type = *type;
	chip->pwr_opmode = stusb160x_get_pwr_opmode(chip);

	return 0;
}

static const struct of_device_id stusb160x_of_match[] = {
	{ .compatible = "st,stusb1600", .data = &stusb1600_regmap_config},
	{},
};
MODULE_DEVICE_TABLE(of, stusb160x_of_match);

static int stusb160x_probe(struct i2c_client *client)
{
	struct stusb160x *chip;
	const struct of_device_id *match;
	struct regmap_config *regmap_config;
	struct fwnode_handle *fwnode;
	int ret;

	chip = devm_kzalloc(&client->dev, sizeof(struct stusb160x), GFP_KERNEL);
	if (!chip)
		return -ENOMEM;

	i2c_set_clientdata(client, chip);

	match = i2c_of_match_device(stusb160x_of_match, client);
	regmap_config = (struct regmap_config *)match->data;
	chip->regmap = devm_regmap_init_i2c(client, regmap_config);
	if (IS_ERR(chip->regmap)) {
		ret = PTR_ERR(chip->regmap);
		dev_err(&client->dev,
			"Failed to allocate register map:%d\n", ret);
		return ret;
	}

	chip->dev = &client->dev;

	chip->vsys_supply = devm_regulator_get_optional(chip->dev, "vsys");
	if (IS_ERR(chip->vsys_supply)) {
		ret = PTR_ERR(chip->vsys_supply);
		if (ret != -ENODEV)
			return ret;
		chip->vsys_supply = NULL;
	}

	chip->vdd_supply = devm_regulator_get_optional(chip->dev, "vdd");
	if (IS_ERR(chip->vdd_supply)) {
		ret = PTR_ERR(chip->vdd_supply);
		if (ret != -ENODEV)
			return ret;
		chip->vdd_supply = NULL;
	}

	chip->vconn_supply = devm_regulator_get_optional(chip->dev, "vconn");
	if (IS_ERR(chip->vconn_supply)) {
		ret = PTR_ERR(chip->vconn_supply);
		if (ret != -ENODEV)
			return ret;
		chip->vconn_supply = NULL;
	}

	fwnode = device_get_named_child_node(chip->dev, "connector");
	if (!fwnode)
		return -ENODEV;

	/*
	 * This fwnode has a "compatible" property, but is never populated as a
	 * struct device. Instead we simply parse it to read the properties.
	 * This it breaks fw_devlink=on. To maintain backward compatibility
	 * with existing DT files, we work around this by deleting any
	 * fwnode_links to/from this fwnode.
	 */
	fw_devlink_purge_absent_suppliers(fwnode);

	/*
	 * When both VDD and VSYS power supplies are present, the low power
	 * supply VSYS is selected when VSYS voltage is above 3.1 V.
	 * Otherwise VDD is selected.
	 */
	if (chip->vdd_supply &&
	    (!chip->vsys_supply ||
	     (regulator_get_voltage(chip->vsys_supply) <= 3100000)))
		chip->main_supply = chip->vdd_supply;
	else
		chip->main_supply = chip->vsys_supply;

	if (chip->main_supply) {
		ret = regulator_enable(chip->main_supply);
		if (ret) {
			dev_err(chip->dev,
				"Failed to enable main supply: %d\n", ret);
			goto fwnode_put;
		}
	}

	/* Get configuration from chip */
	ret = stusb160x_get_caps(chip);
	if (ret) {
		dev_err(chip->dev, "Failed to get port caps: %d\n", ret);
		goto main_reg_disable;
	}

	/* Get optional re-configuration from device tree */
	ret = stusb160x_get_fw_caps(chip, fwnode);
	if (ret) {
		dev_err(chip->dev, "Failed to get connector caps: %d\n", ret);
		goto main_reg_disable;
	}

	ret = stusb160x_chip_init(chip);
	if (ret) {
		dev_err(chip->dev, "Failed to init port: %d\n", ret);
		goto main_reg_disable;
	}

	chip->port = typec_register_port(chip->dev, &chip->capability);
	if (IS_ERR(chip->port)) {
		ret = PTR_ERR(chip->port);
		goto all_reg_disable;
	}

	/*
	 * Default power operation mode initialization: will be updated upon
	 * attach/detach interrupt
	 */
	typec_set_pwr_opmode(chip->port, chip->pwr_opmode);

	if (client->irq) {
		chip->role_sw = fwnode_usb_role_switch_get(fwnode);
		if (IS_ERR(chip->role_sw)) {
			ret = dev_err_probe(chip->dev, PTR_ERR(chip->role_sw),
					    "Failed to get usb role switch\n");
			goto port_unregister;
		}

		ret = stusb160x_irq_init(chip, client->irq);
		if (ret)
			goto role_sw_put;
	} else {
		/*
		 * If Source or Dual power role, need to enable VDD supply
		 * providing Vbus if present. In case of interrupt support,
		 * VDD supply will be dynamically managed upon attach/detach
		 * interrupt.
		 */
		if (chip->port_type != TYPEC_PORT_SNK && chip->vdd_supply) {
			ret = regulator_enable(chip->vdd_supply);
			if (ret) {
				dev_err(chip->dev,
					"Failed to enable VDD supply: %d\n",
					ret);
				goto port_unregister;
			}
			chip->vbus_on = true;
		}
	}

	fwnode_handle_put(fwnode);

	return 0;

role_sw_put:
	if (chip->role_sw)
		usb_role_switch_put(chip->role_sw);
port_unregister:
	typec_unregister_port(chip->port);
all_reg_disable:
	if (stusb160x_get_vconn(chip))
		stusb160x_set_vconn(chip, false);
main_reg_disable:
	if (chip->main_supply)
		regulator_disable(chip->main_supply);
fwnode_put:
	fwnode_handle_put(fwnode);

	return ret;
}

static void stusb160x_remove(struct i2c_client *client)
{
	struct stusb160x *chip = i2c_get_clientdata(client);

	if (chip->partner) {
		typec_unregister_partner(chip->partner);
		chip->partner = NULL;
	}

	if (chip->vbus_on)
		regulator_disable(chip->vdd_supply);

	if (chip->role_sw)
		usb_role_switch_put(chip->role_sw);

	typec_unregister_port(chip->port);

	if (stusb160x_get_vconn(chip))
		stusb160x_set_vconn(chip, false);

	if (chip->main_supply)
		regulator_disable(chip->main_supply);
}

static int __maybe_unused stusb160x_suspend(struct device *dev)
{
	struct stusb160x *chip = dev_get_drvdata(dev);

	/* Mask interrupts */
	return regmap_update_bits(chip->regmap,
				  STUSB160X_ALERT_STATUS_MASK_CTRL,
				  STUSB160X_ALL_ALERTS, STUSB160X_ALL_ALERTS);
}

static int __maybe_unused stusb160x_resume(struct device *dev)
{
	struct stusb160x *chip = dev_get_drvdata(dev);
	u32 status;
	int ret;

	ret = regcache_sync(chip->regmap);
	if (ret)
		return ret;

	/* Check if attach/detach occurred during low power */
	ret = regmap_read(chip->regmap,
			  STUSB160X_CC_CONNECTION_STATUS, &status);
	if (ret)
		return ret;

	if (chip->partner && !(status & STUSB160X_CC_ATTACH))
		stusb160x_detach(chip, status);

	if (!chip->partner && (status & STUSB160X_CC_ATTACH)) {
		ret = stusb160x_attach(chip, status);
		if (ret)
			dev_err(chip->dev, "attach failed: %d\n", ret);
	}

	/* Unmask interrupts */
	return regmap_write_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL,
				 STUSB160X_CC_CONNECTION, 0);
}

static SIMPLE_DEV_PM_OPS(stusb160x_pm_ops, stusb160x_suspend, stusb160x_resume);

static struct i2c_driver stusb160x_driver = {
	.driver = {
		.name = "stusb160x",
		.pm = &stusb160x_pm_ops,
		.of_match_table = stusb160x_of_match,
	},
	.probe = stusb160x_probe,
	.remove = stusb160x_remove,
};
module_i2c_driver(stusb160x_driver);

MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
MODULE_DESCRIPTION("STMicroelectronics STUSB160x Type-C controller driver");
MODULE_LICENSE("GPL v2"