/* SPDX-License-Identifier: GPL-2.0 */
/*
 * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
 * flexcop-usb.h - header file for the USB part
 * see flexcop.c for copyright information
 */
#ifndef __FLEXCOP_USB_H_INCLUDED__
#define __FLEXCOP_USB_H_INCLUDED__

#include <linux/usb.h>

/* transfer parameters */
#define B2C2_USB_FRAMES_PER_ISO 4
#define B2C2_USB_NUM_ISO_URB 4

#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev, 0)
#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev, 0)
#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev, 1)

struct flexcop_usb {
	struct usb_device *udev;
	struct usb_interface *uintf;

	u8 *iso_buffer;
	int buffer_size;
	dma_addr_t dma_addr;

	struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
	struct flexcop_device *fc_dev;

	u8 tmp_buffer[1023+190];
	int tmp_buffer_length;

	/* for URB control messages */
	u8 data[80];
	struct mutex data_mutex;
};

#if 0
/* request types TODO What is its use?*/
typedef enum {

} flexcop_usb_request_type_t;
#endif

/* request */
typedef enum {
	B2C2_USB_WRITE_V8_MEM = 0x04,
	B2C2_USB_READ_V8_MEM  = 0x05,
	B2C2_USB_READ_REG     = 0x08,
	B2C2_USB_WRITE_REG    = 0x0A,
	B2C2_USB_WRITEREGHI   = 0x0B,
	B2C2_USB_FLASH_BLOCK  = 0x10,
	B2C2_USB_I2C_REQUEST  = 0x11,
	B2C2_USB_UTILITY      = 0x12,
} flexcop_usb_request_t;

/* function definition for I2C_REQUEST */
typedef enum {
	USB_FUNC_I2C_WRITE       = 0x01,
	USB_FUNC_I2C_MULTIWRITE  = 0x02,
	USB_FUNC_I2C_READ        = 0x03,
	USB_FUNC_I2C_REPEATWRITE = 0x04,
	USB_FUNC_GET_DESCRIPTOR  = 0x05,
	USB_FUNC_I2C_REPEATREAD  = 0x06,
	/* DKT 020208 - add this to support special case of DiSEqC */
	USB_FUNC_I2C_CHECKWRITE  = 0x07,
	USB_FUNC_I2C_CHECKRESULT = 0x08,
} flexcop_usb_i2c_function_t;

/* function definition for UTILITY request 0x12
 * DKT 020304 - new utility function */
typedef enum {
	UTILITY_SET_FILTER          = 0x01,
	UTILITY_DATA_ENABLE         = 0x02,
	UTILITY_FLEX_MULTIWRITE     = 0x03,
	UTILITY_SET_BUFFER_SIZE     = 0x04,
	UTILITY_FLEX_OPERATOR       = 0x05,
	UTILITY_FLEX_RESET300_START = 0x06,
	UTILITY_FLEX_RESET300_STOP  = 0x07,
	UTILITY_FLEX_RESET300       = 0x08,
	UTILITY_SET_ISO_SIZE        = 0x09,
	UTILITY_DATA_RESET          = 0x0A,
	UTILITY_GET_DATA_STATUS     = 0x10,
	UTILITY_GET_V8_REG          = 0x11,
	/* DKT 020326 - add function for v1.14 */
	UTILITY_SRAM_WRITE          = 0x12,
	UTILITY_SRAM_READ           = 0x13,
	UTILITY_SRAM_TESTFILL       = 0x14,
	UTILITY_SRAM_TESTSET        = 0x15,
	UTILITY_SRAM_TESTVERIFY     = 0x16,
} flexcop_usb_utility_function_t;

#define B2C2_WAIT_FOR_OPERATION_RW 1000
#define B2C2_WAIT_FOR_OPERATION_RDW 3000
#define B2C2_WAIT_FOR_OPERATION_WDW 1000

#define B2C2_WAIT_FOR_OPERATION_V8READ 3000
#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3000
#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3000

typedef enum {
	V8_MEMORY_PAGE_DVB_CI = 0x20,
	V8_MEMORY_PAGE_DVB_DS = 0x40,
	V8_MEMORY_PAGE_MULTI2 = 0x60,
	V8_MEMORY_PAGE_FLASH  = 0x80
} flexcop_usb_mem_page_t;

#define V8_MEMORY_EXTENDED (1 << 15)
#define USB_MEM_READ_MAX   32
#define USB_MEM_WRITE_MAX   1
#define USB_FLASH_MAX       8
#define V8_MEMORY_PAGE_SIZE 0x8000 /* 32K */
#define V8_MEMORY_PAGE_MASK 0x7FFF

#endif