// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2026 Chris Morgan <macromorgan@hotmail.com>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/usb/pd.h>
#include "rk3576.dtsi"
/ {
model = "Anbernic RG Vita Pro";
chassis-type = "handset";
compatible = "anbernic,rg-vita-pro", "rockchip,rk3576";
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc;
mmc2 = &sdio;
};
chosen {
stdout-path = "serial0:1500000n8";
};
adc_keys_home: adc-keys-home {
compatible = "adc-keys";
io-channel-names = "buttons";
io-channels = <&saradc 1>;
keyup-threshold-microvolt = <1800000>;
poll-interval = <60>;
button-home {
label = "HOME";
linux,code = <KEY_HOME>;
press-threshold-microvolt = <1750>;
};
};
adc_keys_play: adc-keys-play {
compatible = "adc-keys";
io-channel-names = "buttons";
io-channels = <&saradc 3>;
keyup-threshold-microvolt = <1300000>;
poll-interval = <60>;
button-play {
label = "PLAY";
linux,code = <KEY_PLAYPAUSE>;
press-threshold-microvolt = <1750>;
};
};
hp_amp: audio-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&hp_amp_enable_h>;
pinctrl-names = "default";
sound-name-prefix = "Headphone Amp";
};
/*
* LEDs and Backlights can be controlled as a PWM, but PWM
* support is not yet available.
*/
gpio_backlight: backlight {
compatible = "gpio-backlight";
gpios = <&gpio2 RK_PC4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&led_backlight_h>;
pinctrl-names = "default";
};
/*
* Battery values from BSP except for the following:
*
* factory-internal-resistance-micro-ohms - This was set to 80 which
* is likely incorrect and changed to 80000.
*
* charge-full-design-microamp-hours - Was set to 8000000 but the
* physical battery says 5000000.
*
* constant-charge-current-max-microamp - Was set to 10000000 which
* both seems high and exceeds what the charger hardware can do.
* Setting to 3800000 which is the maximum input current the charger
* can handle.
*/
battery: battery {
compatible = "simple-battery";
charge-full-design-microamp-hours = <5000000>;
charge-term-current-microamp = <300000>;
constant-charge-current-max-microamp = <3800000>;
constant-charge-voltage-max-microvolt = <4350000>;
factory-internal-resistance-micro-ohms = <80000>;
precharge-current-microamp = <180000>;
precharge-upper-limit-microvolt = <3600000>;
voltage-max-design-microvolt = <4350000>;
voltage-min-design-microvolt = <3000000>;
};
gpio_keys_control: gpio-keys-control {
compatible = "gpio-keys";
pinctrl-0 = <&gamepad_keys_l>;
pinctrl-names = "default";
button-a {
gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
label = "EAST";
linux,code = <BTN_EAST>;
};
button-b {
gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
label = "SOUTH";
linux,code = <BTN_SOUTH>;
};
button-down {
gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
label = "DPAD-DOWN";
linux,code = <BTN_DPAD_DOWN>;
};
button-l1 {
gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
label = "TL";
linux,code = <BTN_TL>;
};
button-l2 {
gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
label = "TL2";
linux,code = <BTN_TL2>;
};
button-left {
gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
label = "DPAD-LEFT";
linux,code = <BTN_DPAD_LEFT>;
};
button-menu {
gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
label = "MENU";
linux,code = <BTN_MODE>;
};
button-right {
gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
label = "DPAD-RIGHT";
linux,code = <BTN_DPAD_RIGHT>;
};
button-r1 {
gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
label = "T2";
linux,code = <BTN_TR>;
};
button-r2 {
gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
label = "TR2";
linux,code = <BTN_TR2>;
};
button-select {
gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
label = "SELECT";
linux,code = <BTN_SELECT>;
};
button-start {
gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
label = "START";
linux,code = <BTN_START>;
};
button-thumbl {
gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
label = "THUMBL";
linux,code = <BTN_THUMBL>;
};
button-thumbr {
gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_LOW>;
label = "THUMBR";
linux,code = <BTN_THUMBR>;
};
button-up {
gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
label = "DPAD-UP";
linux,code = <BTN_DPAD_UP>;
};
button-x {
gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
label = "NORTH";
linux,code = <BTN_NORTH>;
};
button-y {
gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
label = "WEST";
linux,code = <BTN_WEST>;
};
};
gpio_keys_volume: gpio-keys-volume {
compatible = "gpio-keys";
autorepeat;
pinctrl-0 = <&vol_keys_l>;
pinctrl-names = "default";
vol-down-key {
gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>;
label = "VOLUMEDOWN";
linux,code = <KEY_VOLUMEDOWN>;
};
vol-up-key {
gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
label = "VOLUMEUP";
linux,code = <KEY_VOLUMEUP>;
};
};
hdmi-con {
compatible = "hdmi-connector";
type = "c";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
gpio_leds: leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_amber_h>, <&led_green_h>, <&led_red_h>;
pinctrl-names = "default";
charging-led {
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_CHARGING;
gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
};
full-led {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_POWER;
gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
};
bat-low-led {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_ALARM;
gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
};
};
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <1100000>;
regulator-min-microvolt = <1100000>;
regulator-name = "vcc_1v1_nldo_s3";
vin-supply = <&vcc_3v8_sys>;
};
vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <2000000>;
regulator-min-microvolt = <2000000>;
regulator-name = "vcc_2v0_pldo_s3";
vin-supply = <&vcc_3v8_sys>;
};
vcc_3v8_sys: regulator-vcc-3v8-sys {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <3800000>;
regulator-min-microvolt = <3800000>;
regulator-name = "vcc_3v8_sys";
};
vcc3v3_sd_s0: regulator-vcc3v3-sd-s0 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc_3v3_sd_s0_h>;
pinctrl-names = "default";
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc3v3_sd_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_sdio: regulator-vcc-sdio {
compatible = "regulator-gpio";
regulator-name = "vcc_sdio";
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc_sdio_h>;
pinctrl-names = "default";
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <1800000>;
states = <1800000 0>, <3300000 1>;
};
vcc_wifi: regulator-vcc-wifi {
compatible = "regulator-fixed";
regulator-name = "vcc_wifi";
enable-active-high;
gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc_wifi_h>;
pinctrl-names = "default";
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdd_lcd: regulator-vdd-lcd {
compatible = "regulator-fixed";
regulator-name = "vdd_lcd";
regulator-always-on;
enable-active-high;
gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vdd_lcd_h>;
pinctrl-names = "default";
regulator-state-mem {
regulator-off-in-suspend;
};
};
rfkill {
compatible = "rfkill-gpio";
pinctrl-names = "default";
pinctrl-0 = <&wifi_en_h>;
radio-type = "wlan";
shutdown-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
};
sound: sound {
compatible = "simple-audio-card";
pinctrl-0 = <&hp_det>;
pinctrl-names = "default";
simple-audio-card,aux-devs = <&aw87391_pa_l>, <&aw87391_pa_r>,
<&hp_amp>;
simple-audio-card,format = "i2s";
simple-audio-card,hp-det-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
simple-audio-card,mclk-fs = <256>;
simple-audio-card,name = "rockchip,es8388-codec";
simple-audio-card,pin-switches = "Headphones", "Internal Speakers";
simple-audio-card,routing =
"LINPUT1", "Mic Jack",
"LINPUT2", "Mic Jack",
"RINPUT1", "Onboard Microphone",
"RINPUT2", "Onboard Microphone",
"Headphones", "Headphone Amp OUTL",
"Headphones", "Headphone Amp OUTR",
"Headphone Amp INL", "LOUT1",
"Headphone Amp INR", "ROUT1",
"Internal Speakers", "Left Amp OUT",
"Internal Speakers", "Right Amp OUT",
"Left Amp IN", "LOUT2",
"Right Amp IN", "ROUT2";
simple-audio-card,widgets =
"Microphone", "Mic Jack",
"Microphone", "Onboard Microphone",
"Headphone", "Headphones",
"Speaker", "Internal Speakers";
status = "okay";
simple-audio-card,codec {
sound-dai = <&es8388>;
system-clock-frequency = <12288000>;
};
simple-audio-card,cpu {
sound-dai = <&sai1>;
};
};
};
&combphy0_ps {
status = "okay";
};
&cpu_b0 {
cpu-supply = <&vdd_cpu_big_s0>;
};
&cpu_b1 {
cpu-supply = <&vdd_cpu_big_s0>;
};
&cpu_b2 {
cpu-supply = <&vdd_cpu_big_s0>;
};
&cpu_b3 {
cpu-supply = <&vdd_cpu_big_s0>;
};
&cpu_l0 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l1 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l2 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&dsi {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
panel: panel@0 {
compatible = "anbernic,panel-vita-pro", "anbernic,td4310";
reg = <0>;
backlight = <&gpio_backlight>;
enable-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable>, <&lcd_rst>;
reset-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
rotation = <270>;
vdd-supply = <&vdd_lcd>;
port {
mipi_in_panel: endpoint {
remote-endpoint = <&mipi_out_panel>;
};
};
};
};
&dsi_in {
dsi_in_vp1: endpoint {
remote-endpoint = <&vp1_out_dsi>;
};
};
&dsi_out {
mipi_out_panel: endpoint {
remote-endpoint = <&mipi_in_panel>;
};
};
&gpu {
mali-supply = <&vdd_gpu_s0>;
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&hdptxphy {
status = "okay";
};
&i2c0 {
pinctrl-0 = <&i2c0m1_xfer>;
pinctrl-names = "default";
status = "okay";
/* synaptics,dsx-i2c touchscreen at 0x70 */
};
&i2c1 {
status = "okay";
pmic@23 {
compatible = "rockchip,rk806";
reg = <0x23>;
#gpio-cells = <2>;
gpio-controller;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_pins
&rk806_dvs1_null
&rk806_dvs2_null
&rk806_dvs3_null>;
system-power-controller;
vcc1-supply = <&vcc_3v8_sys>;
vcc2-supply = <&vcc_3v8_sys>;
vcc3-supply = <&vcc_3v8_sys>;
vcc4-supply = <&vcc_3v8_sys>;
vcc5-supply = <&vcc_3v8_sys>;
vcc6-supply = <&vcc_3v8_sys>;
vcc7-supply = <&vcc_3v8_sys>;
vcc8-supply = <&vcc_3v8_sys>;
vcc9-supply = <&vcc_3v8_sys>;
vcc10-supply = <&vcc_3v8_sys>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
vcc12-supply = <&vcc_3v8_sys>;
vcc13-supply = <&vcc_1v1_nldo_s3>;
vcc14-supply = <&vcc_1v1_nldo_s3>;
vcca-supply = <&vcc_3v8_sys>;
rk806_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl1";
function = "pin_fun0";
};
rk806_dvs2_null: dvs2-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs3_null: dvs3-null-pins {
pins = "gpio_pwrctrl3";
function = "pin_fun0";
};
regulators {
vdd_cpu_big_s0: dcdc-reg1 {
regulator-always-on;
regulator-boot-on;
regulator-enable-ramp-delay = <400>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-name = "vdd_cpu_big_s0";
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_npu_s0: dcdc-reg2 {
regulator-boot-on;
regulator-enable-ramp-delay = <400>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-name = "vdd_npu_s0";
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_lit_s0: dcdc-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-name = "vdd_cpu_lit_s0";
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vcc_3v3_s3: dcdc-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_3v3_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vdd_gpu_s0: dcdc-reg5 {
regulator-boot-on;
regulator-enable-ramp-delay = <400>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdd_gpu_s0";
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
vddq_ddr_s0: dcdc-reg6 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vddq_ddr_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_logic_s0: dcdc-reg7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <800000>;
regulator-name = "vdd_logic_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s3: dcdc-reg8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_1v8_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd2_ddr_s3: dcdc-reg9 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vdd2_ddr_s3";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdd_ddr_s0: dcdc-reg10 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vdd_ddr_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca_1v8_s0: pldo-reg1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca_1v8_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_pldo2_s0: pldo-reg2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_pldo2_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda_1v2_s0: pldo-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vdda_1v2_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca_3v3_s0: pldo-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcca_3v3_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd_s0: pldo-reg5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd_s0";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcca1v8_pldo6_s3: pldo-reg6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_pldo6_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_0v75_s3: nldo-reg1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-name = "vdd_0v75_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdda_ddr_pll_s0: nldo-reg2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-name = "vdda_ddr_pll_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v75_hdmi_s0: nldo-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-name = "vdda0v75_hdmi_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda_0v85_s0: nldo-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-name = "vdda_0v85_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda_0v75_s0: nldo-reg5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-name = "vdda_0v75_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&i2c2 {
status = "okay";
/* inv,icm42607 IMU at 0x68 */
};
&i2c3 {
status = "okay";
es8388: audio-codec@10 {
compatible = "everest,es8388", "everest,es8328";
reg = <0x10>;
assigned-clock-rates = <12288000>;
assigned-clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
AVDD-supply = <&vcca_3v3_s0>;
clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
DVDD-supply = <&vcc_3v3_s3>;
HPVDD-supply = <&vcca_3v3_s0>;
pinctrl-0 = <&sai1m0_mclk>;
pinctrl-names = "default";
PVDD-supply = <&vcc_3v3_s3>;
#sound-dai-cells = <0>;
};
aw87391_pa_l: audio-codec@58 {
compatible = "anbernic,rgds-amp", "awinic,aw87391";
reg = <0x58>;
#sound-dai-cells = <0>;
sound-name-prefix = "Left Amp";
};
aw87391_pa_r: audio-codec@5b {
compatible = "anbernic,rgds-amp", "awinic,aw87391";
reg = <0x5b>;
#sound-dai-cells = <0>;
sound-name-prefix = "Right Amp";
};
};
&i2c6 {
pinctrl-0 = <&i2c6m3_xfer>;
pinctrl-names = "default";
status = "okay";
sgm41542: charger@3b {
compatible = "sgmicro,sgm41542";
reg = <0x3b>;
input-current-limit-microamp = <3000000>;
input-voltage-limit-microvolt = <4500000>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PD2 IRQ_TYPE_EDGE_FALLING>;
pinctrl-0 = <&charger_irq>;
pinctrl-names = "default";
monitored-battery = <&battery>;
status = "okay";
regulators {
vbus5v0_typec: otg-vbus {
regulator-name = "vbus5v0_typec";
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
/* Unused iSmartWare SW2001 encryption device at 0x3c */
husb311: typec-port@4e {
compatible = "hynetek,husb311", "richtek,rt1711h";
reg = <0x4e>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PD1 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&usbc_int>;
pinctrl-names = "default";
status = "okay";
vbus-supply = <&vbus5v0_typec>;
connector {
compatible = "usb-c-connector";
data-role = "dual";
label = "USB-C";
op-sink-microwatt = <10000000>;
power-role = "dual";
try-power-role = "sink";
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
PDO_FIXED(9000, 2000, PDO_FIXED_USB_COMM)>;
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
altmodes {
displayport {
svid = /bits/ 16 <0xff01>;
vdo = <0xffffffff>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
usbc0_hs_ep: endpoint {
remote-endpoint = <&usb_drd0_hs_ep>;
};
};
port@1 {
reg = <1>;
usbc0_ss_ep: endpoint {
remote-endpoint = <&usb_drd0_ss_ep>;
};
};
port@2 {
reg = <2>;
usbc0_dp_ep: endpoint {
remote-endpoint = <&usbdp_phy_ep>;
};
};
};
};
};
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-output-names = "hym8563";
interrupt-parent = <&gpio0>;
interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
wakeup-source;
};
/* cellwise,cw221X battery manager at 0x64 */
};
&mipidcphy {
status = "okay";
};
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie0_perstn>;
reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc_wifi>;
status = "okay";
};
&pinctrl {
audio {
hp_amp_enable_h: hp-amp-enable {
rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
};
hp_det: hp-det {
rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
bluetooth {
bt_reset_gpio: bt-reset-pin {
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_wake_gpio: bt-wake-pin {
rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_wake_host_irq: bt-wake-host-irq {
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
charger {
charger_irq: charger-irq {
rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
display {
lcd_enable: lcd-enable {
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
lcd_rst: lcd-rst {
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
gpio-keys {
vol_keys_l: vol-keys_l {
rockchip,pins =
<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
};
gamepad_keys_l: gamepad-keys-l {
rockchip,pins =
<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
gpio-leds {
led_amber_h: led-amber-h {
rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
led_backlight_h: led-backlight-h {
rockchip,pins = <2 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
};
led_green_h: led-green-h {
rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
led_red_h: led-red-h {
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie {
pcie0_perstn: pcie0-perstn {
rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
regulator {
vcc_3v3_sd_s0_h: vcc-3v3-sd-s0-h {
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc_sdio_h: vcc-sdio-h {
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc_wifi_h: vcc-wifi-h {
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
vdd_lcd_h: vdd-lcd-h {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
rtc {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
touch {
touch_int: touch-int {
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb {
usbc_int: usbc-int {
rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
};
usbc0_sbu1: usbc0-sbu1 {
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
};
usbc0_sbu2: usbc0-sbu2 {
rockchip,pins = <4 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
wifi {
wifi_en_h: wifi-en-h {
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&sai1 {
pinctrl-0 = <&sai1m0_lrck
&sai1m0_sclk
&sai1m0_sdi0
&sai1m0_sdo0>;
pinctrl-names = "default";
status = "okay";
};
&sai6 {
status = "okay";
};
&saradc {
vref-supply = <&vcca1v8_pldo2_s0>;
status = "okay";
};
&sdio {
bus-width = <4>;
cap-sd-highspeed;
disable-wp;
max-frequency = <150000000>;
no-mmc;
no-sdio;
pinctrl-0 = <&sdmmc1m0_bus4>, <&sdmmc1m0_clk>,
<&sdmmc1m0_cmd>, <&sdmmc1m0_det>;
pinctrl-names = "default";
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v3_sd_s0>;
vqmmc-supply = <&vcc_sdio>;
status = "okay";
};
&sdhci {
bus-width = <8>;
full-pwr-cycle-in-suspend;
no-sd;
no-sdio;
non-removable;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
disable-wp;
max-frequency = <150000000>;
no-sdio;
no-mmc;
pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>,
<&sdmmc0_cmd>, <&sdmmc0_det>;
pinctrl-names = "default";
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v3_sd_s0>;
vqmmc-supply = <&vccio_sd_s0>;
status = "okay";
};
&spi1 {
num-cs = <1>;
pinctrl-0 = <&spi1m2_pins>, <&spi1m2_csn0>;
status = "okay";
/* SPI controlled MCU for joystick and joystick LEDs. */
};
&vop {
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};
&vp1 {
vp1_out_dsi: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
reg = <ROCKCHIP_VOP2_EP_MIPI0>;
remote-endpoint = <&dsi_in_vp1>;
};
};
&u2phy0 {
status = "okay";
};
&u2phy0_otg {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart6 {
pinctrl-0 = <&uart6m1_xfer>, <&uart6m1_ctsn>, <&uart6m1_rtsn>;
pinctrl-names = "default";
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "realtek,rtl8822cs-bt";
device-wake-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&bt_reset_gpio>, <&bt_wake_gpio>, <&bt_wake_host_irq>;
pinctrl-names = "default";
};
};
&usbdp_phy {
mode-switch;
orientation-switch;
pinctrl-names = "default";
pinctrl-0 = <&usbc0_sbu1 &usbc0_sbu2>;
sbu1-dc-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
sbu2-dc-gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_HIGH>;
status = "okay";
port {
usbdp_phy_ep: endpoint {
remote-endpoint = <&usbc0_dp_ep>;
};
};
};
&usb_drd0_dwc3 {
usb-role-switch;
dr_mode = "otg";
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
usb_drd0_hs_ep: endpoint {
remote-endpoint = <&usbc0_hs_ep>;
};
};
port@1 {
reg = <1>;
usb_drd0_ss_ep: endpoint {
remote-endpoint = <&usbc0_ss_ep>;
};
};
};
};