// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
// Copyright (C) 2024 Arm Ltd.

/dts-v1/;

#include "sun55i-a523.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>

/ {
	model = "Avaota A1";
	compatible = "yuzukihd,avaota-a1", "allwinner,sun55i-t527";

	aliases {
		ethernet0 = &gmac0;
		ethernet1 = &gmac1;
		serial0 = &uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	ext_osc32k: ext-osc32k-clk {
		#clock-cells = <0>;
		compatible = "fixed-clock";
		clock-frequency = <32768>;
		clock-output-names = "ext_osc32k";
	};

	iio-hwmon {
		compatible = "iio-hwmon";
		io-channels = <&axp717_adc 3>, /* vsys_v */
			      <&axp717_adc 4>; /* pmic_temp */
	};

	reg_vcc12v: vcc12v {
		/* DC input jack */
		compatible = "regulator-fixed";
		regulator-name = "vcc-12v";
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
		regulator-always-on;
	};

	reg_vcc5v: vcc5v {
		/* board wide 5V supply from the 12V->5V regulator */
		compatible = "regulator-fixed";
		regulator-name = "vcc-5v";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&reg_vcc12v>;
		regulator-always-on;
	};

	reg_usb_vbus: vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb-vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&reg_vcc5v>;
		gpio = <&pio 8 12 GPIO_ACTIVE_HIGH>;	/* PI12 */
		enable-active-high;
	};
};

&ehci0 {
	status = "okay";
};

&ehci1 {
	status = "okay";
};

&gmac0 {
	phy-mode = "rgmii-id";
	phy-handle = <&ext_rgmii0_phy>;
	phy-supply = <&reg_dcdc4>;

	allwinner,tx-delay-ps = <100>;
	allwinner,rx-delay-ps = <300>;

	status = "okay";
};

&gmac1 {
	phy-mode = "rgmii-id";
	phy-handle = <&ext_rgmii1_phy>;
	phy-supply = <&reg_dcdc4>;

	tx-internal-delay-ps = <100>;
	rx-internal-delay-ps = <100>;

	status = "okay";
};

&gpu {
	mali-supply = <&reg_dcdc2>;
	status = "okay";
};

&ir {
	pinctrl-names = "default";
	pinctrl-0 = <&ir_rx_pin>;
	status = "okay";
};

&ledc {
	pinctrl-names = "default";
	pinctrl-0 = <&ledc_ph_pin>;
	allwinner,pixel-format = "grb";
	allwinner,t0l-ns = <800>;
	allwinner,t0h-ns = <300>;
	allwinner,t1l-ns = <320>;
	allwinner,t1h-ns = <800>;
	allwinner,treset-ns = <84>;
	status = "okay";

	multi-led@0 {
		reg = <0x0>;
		color = <LED_COLOR_ID_RGB>;
		function = LED_FUNCTION_INDICATOR;
		function-enumerator = <0>;
	};

	multi-led@1 {
		reg = <0x1>;
		color = <LED_COLOR_ID_RGB>;
		function = LED_FUNCTION_INDICATOR;
		function-enumerator = <1>;
	};

	multi-led@2 {
		reg = <0x2>;
		color = <LED_COLOR_ID_RGB>;
		function = LED_FUNCTION_INDICATOR;
		function-enumerator = <2>;
	};

	multi-led@3 {
		reg = <0x3>;
		color = <LED_COLOR_ID_RGB>;
		function = LED_FUNCTION_INDICATOR;
		function-enumerator = <3>;
	};
};

&mdio0 {
	ext_rgmii0_phy: ethernet-phy@1 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <1>;
		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
		reset-assert-us = <10000>;
		reset-deassert-us = <150000>;
	};
};

&mdio1 {
	ext_rgmii1_phy: ethernet-phy@1 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <1>;
		reset-gpios = <&pio 9 16 GPIO_ACTIVE_LOW>; /* PJ16 */
		reset-assert-us = <10000>;
		reset-deassert-us = <150000>;
	};
};

&mmc0 {
	vmmc-supply = <&reg_cldo3>;
	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
	bus-width = <4>;
	status = "okay";
};

&mmc2 {
	bus-width = <8>;
	cap-mmc-hw-reset;
	mmc-ddr-1_8v;
	mmc-hs200-1_8v;
	non-removable;
	vmmc-supply = <&reg_cldo3>;
	vqmmc-supply = <&reg_cldo1>;
	status = "okay";
};

&ohci0 {
	status = "okay";
};

&ohci1 {
	status = "okay";
};

&pio {
	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
	vcc-pc-supply = <&reg_cldo1>;
	vcc-pd-supply = <&reg_dcdc4>;
	vcc-pe-supply = <&reg_dcdc4>;
	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
	vcc-pg-supply = <&reg_bldo1>;
	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
	vcc-pi-supply = <&reg_dcdc4>;
	vcc-pj-supply = <&reg_dcdc4>;
	vcc-pk-supply = <&reg_bldo3>;
};

&r_i2c0 {
	status = "okay";

	axp717: pmic@35 {
		compatible = "x-powers,axp717";
		reg = <0x35>;
		interrupt-controller;
		#interrupt-cells = <1>;
		interrupt-parent = <&nmi_intc>;
		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

		vin1-supply = <&reg_vcc5v>;
		vin2-supply = <&reg_vcc5v>;
		vin3-supply = <&reg_vcc5v>;
		vin4-supply = <&reg_vcc5v>;
		aldoin-supply = <&reg_vcc5v>;
		bldoin-supply = <&reg_vcc5v>;
		cldoin-supply = <&reg_vcc5v>;

		axp717_adc: adc {
			compatible = "x-powers,axp717-adc";
			#io-channel-cells = <1>;
		};

		battery-power {
			compatible = "x-powers,axp717-battery-power-supply";
			/* no battery; output used for dcdc4 instead */
			status = "disabled";
		};

		regulators {
			/* Supplies the "little" cluster (1.4 GHz cores) */
			reg_dcdc1: dcdc1 {
				regulator-always-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <1160000>;
				regulator-name = "vdd-cpul";
			};

			reg_dcdc2: dcdc2 {
				regulator-always-on;
				regulator-min-microvolt = <920000>;
				regulator-max-microvolt = <920000>;
				regulator-name = "vdd-gpu-sys";
			};

			reg_dcdc3: dcdc3 {
				regulator-always-on;
				regulator-min-microvolt = <1160000>;
				regulator-max-microvolt = <1160000>;
				regulator-name = "vdd-dram";
			};

			reg_dcdc4: dcdc4 {
				regulator-always-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vdd-io";
			};

			reg_aldo1: aldo1 {
				/* not connected */
			};

			reg_aldo2: aldo2 {
				/* not connected */
			};

			reg_aldo3: aldo3 {
				/* supplies the I2C pins for this PMIC */
				regulator-always-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc-pl-pm";
			};

			reg_aldo4: aldo4 {
				regulator-always-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc-pll-dxco-avcc";
			};

			reg_bldo1: bldo1 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc-pg-wifi-lvds";
			};

			reg_bldo2: bldo2 {
				regulator-always-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc-dram-1v8";
			};

			reg_bldo3: bldo3 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc-cvp-pk-vid1v8";
			};

			reg_bldo4: bldo4 {
				/* not connected */
			};

			reg_cldo1: cldo1 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc-pc";
			};

			reg_cldo2: cldo2 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc-efuse";
			};

			reg_cldo3: cldo3 {
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc-io-mmc-spi-ana";
			};

			reg_cldo4: cldo4 {
				/* not connected */
			};

			reg_cpusldo: cpusldo {
				/* supplies the management core */
				regulator-always-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
				regulator-name = "vdd-cpus";
			};
		};

		usb-power {
			compatible = "x-powers,axp717-usb-power-supply";
			/* 12V-5V buck converter can supply up to 5A */
			input-current-limit-microamp = <3250000>;
		};
	};

	axp323: pmic@36 {
		compatible = "x-powers,axp323";
		reg = <0x36>;
		#interrupt-cells = <1>;
		interrupt-controller;
		interrupt-parent = <&nmi_intc>;
		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
		status = "okay";

		vin1-supply = <&reg_vcc5v>;
		vin2-supply = <&reg_vcc5v>;
		vin3-supply = <&reg_vcc5v>;

		regulators {
			aldo1 {
				/* not connected */
			};

			dldo1 {
				/* not connected */
			};

			/* Supplies the "big" cluster (1.8 GHz cores) */
			reg_dcdc1_323: dcdc1 {
				regulator-always-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <1160000>;
				regulator-name = "vdd-cpub";
			};

			/* DCDC2 is polyphased with DCDC1 */

			/* Some RISC-V management core related voltage */
			reg_dcdc3_323: dcdc3 {
				regulator-always-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
				regulator-name = "vdd-dnr";
			};
		};
	};
};

&r_pio {
/*
 * Specifying the supply would create a circular dependency.
 *
 *	vcc-pl-supply = <&reg_aldo3>;
 */
	vcc-pm-supply = <&reg_aldo3>;
};

&rtc {
	clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>,
		 <&r_ccu CLK_R_AHB>, <&ext_osc32k>;
	clock-names = "bus", "hosc", "ahb", "ext-osc32k";
	assigned-clocks = <&rtc CLK_OSC32K>;
	assigned-clock-rates = <32768>;
};

&spi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi0_pj_pins>, <&spi0_cs0_pj_pin>,
		    <&spi0_hold_pj_pin>, <&spi0_wp_pj_pin>;
	status = "okay";

	nand@0 {
		compatible = "spi-nand";
		reg = <0>;
		spi-max-frequency = <100000000>;
		spi-rx-bus-width = <4>;
		spi-tx-bus-width = <4>;
	};
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pb_pins>;
	status = "okay";
};

&usb_otg {
	 /*
	  * The CC pins of the USB-C port have two pull-down resistors
	  * connected to GND, which fixes this port to a peripheral role.
	  * There is a regulator, controlled by a GPIO, to provide VBUS power
	  * to the port, and a VBUSDET GPIO, to detect externally provided
	  * power, but without the CC pins there is no real way to do a
	  * runtime role detection.
	  */
	dr_mode = "peripheral";
	status = "okay";
};

&usbphy {
	usb0_vbus-supply = <&reg_usb_vbus>;
	usb0_vbus_det-gpios = <&pio 8 13 GPIO_ACTIVE_HIGH>; /* PI13 */
	status = "okay";
};