.. highlight:: none
Debugging kernel and modules via gdb
====================================
The kernel debugger kgdb, hypervisors like QEMU or JTAG-based hardware
interfaces allow to debug the Linux kernel and its modules during runtime
using gdb. Gdb comes with a powerful scripting interface for python. The
kernel provides a collection of helper scripts that can simplify typical
kernel debugging steps. This is a short tutorial about how to enable and use
them. It focuses on QEMU/KVM virtual machines as target, but the examples can
be transferred to the other gdb stubs as well.
Requirements
------------
- gdb 7.2+ (recommended: 7.4+) with python support enabled (typically true
for distributions)
Setup
-----
- Create a virtual Linux machine for QEMU/KVM (see www.linux-kvm.org and
www.qemu.org for more details). For cross-development,
https://landley.net/aboriginal/bin keeps a pool of machine images and
toolchains that can be helpful to start from.
- Build the kernel with CONFIG_GDB_SCRIPTS enabled, but leave
CONFIG_DEBUG_INFO_REDUCED off. If your architecture supports
CONFIG_FRAME_POINTER, keep it enabled.
- Install that kernel on the guest, turn off KASLR if necessary by adding
"nokaslr" to the kernel command line.
Alternatively, QEMU allows to boot the kernel directly using -kernel,
-append, -initrd command line switches. This is generally only useful if
you do not depend on modules. See QEMU documentation for more details on
this mode. In this case, you should build the kernel with
CONFIG_RANDOMIZE_BASE disabled if the architecture supports KASLR.
- Build the gdb scripts (required on kernels v5.1 and above)::
make scripts_gdb
- Enable the gdb stub of QEMU/KVM, either
- at VM startup time by appending "-s" to the QEMU command line
or
- during runtime by issuing "gdbserver" from the QEMU monitor
console
- cd /path/to/linux-build
- Start gdb: gdb vmlinux
Note: Some distros may restrict auto-loading of gdb scripts to known safe
directories. In case gdb reports to refuse loading vmlinux-gdb.py, add::
add-auto-load-safe-path /path/to/linux-build
to ~/.gdbinit. See gdb help for more details.
- Attach to the booted guest::
(gdb) target remote :1234
Examples of using the Linux-provided gdb helpers
------------------------------------------------
- Load module (and main kernel) symbols::
(gdb) lx-symbols
loading vmlinux
scanning for modules in /home/user/linux/build
loading @0xffffffffa0020000: /home/user/linux/build/net/netfilter/xt_tcpudp.ko
loading @0xffffffffa0016000: /home/user/linux/build/net/netfilter/xt_pkttype.ko
loading @0xffffffffa0002000: /home/user/linux/build/net/netfilter/xt_limit.ko
loading @0xffffffffa00ca000: /home/user/linux/build/net/packet/af_packet.ko
loading @0xffffffffa003c000: /home/user/linux/build/fs/fuse/fuse.ko
...
loading @0xffffffffa0000000: /home/user/linux/build/drivers/ata/ata_generic.ko
- Set a breakpoint on some not yet loaded module function, e.g.::
(gdb) b btrfs_init_sysfs
Function "btrfs_init_sysfs" not defined.
Make breakpoint pending on future shared library load? (y or [n]) y
Breakpoint 1 (btrfs_init_sysfs) pending.
- Continue the target::
(gdb) c
- Load the module on the target and watch the symbols being loaded as well as
the breakpoint hit::
loading @0xffffffffa0034000: /home/user/linux/build/lib/libcrc32c.ko
loading @0xffffffffa0050000: /home/user/linux/build/lib/lzo/lzo_compress.ko
loading @0xffffffffa006e000: /home/user/linux/build/lib/zlib_deflate/zlib_deflate.ko
loading @0xffffffffa01b1000: /home/user/linux/build/fs/btrfs/btrfs.ko
Breakpoint 1, btrfs_init_sysfs () at /home/user/linux/fs/btrfs/sysfs.c:36
36 btrfs_kset = kset_create_and_add("btrfs", NULL, fs_kobj);
- Dump the log buffer of the target kernel::
(gdb) lx-dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-rc4-dbg+ (...
[ 0.000000] Command line: root=/dev/sda2 resume=/dev/sda1 vga=0x314
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
....
- Examine fields of the current task struct(supported by x86 and arm64 only)::
(gdb) p $lx_current().pid
$1 = 4998
(gdb) p $lx_current().comm
$2 = "modprobe\000\000\000\000\000\000\000"
- Make use of the per-cpu function for the current or a specified CPU::
(gdb) p $lx_per_cpu("runqueues").nr_running
$3 = 1
(gdb) p $lx_per_cpu("runqueues", 2).nr_running
$4 = 0
- Dig into hrtimers using the container_of helper::
(gdb) set $next = $lx_per_cpu("hrtimer_bases").clock_base[0].active.next
(gdb) p *$container_of($next, "struct hrtimer", "node")
$5 = {
node = {
node = {
__rb_parent_color = 18446612133355256072,
rb_right = 0x0 <irq_stack_union>,
rb_left = 0x0 <irq_stack_union>
},
expires = {
tv64 = 1835268000000
}
},
_softexpires = {
tv64 = 1835268000000
},
function = 0xffffffff81078232 <tick_sched_timer>,
base = 0xffff88003fd0d6f0,
state = 1,
start_pid = 0,
start_site = 0xffffffff81055c1f <hrtimer_start_range_ns+20>,
start_comm = "swapper/2\000\000\000\000\000\000"
}
List of commands and functions
------------------------------
The number of commands and convenience functions may evolve over the time,
this is just a snapshot of the initial version::
(gdb) apropos lx
function lx_current -- Return current task
function lx_module -- Find module by name and return the module variable
function lx_per_cpu -- Return per-cpu variable
function lx_task_by_pid -- Find Linux task by PID and return the task_struct variable
function lx_thread_info -- Calculate Linux thread_info from task variable
lx-dmesg -- Print Linux kernel log buffer
lx-lsmod -- List currently loaded modules
lx-symbols -- (Re-)load symbols of Linux kernel and currently loaded modules
Detailed help can be obtained via "help <command-name>" for commands and "help
function <function-name>" for convenience functions.