// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2019, The Linaro Limited. All rights reserved. */ #include <linux/coresight.h> #include <linux/device.h> #include <linux/err.h> #include <linux/of.h> #include <linux/property.h> #include <linux/slab.h> #include <dt-bindings/arm/coresight-cti-dt.h> #include "coresight-cti.h" #include "coresight-priv.h" /* Number of CTI signals in the v8 architecturally defined connection */ #define NR_V8PE_IN_SIGS 2 #define NR_V8PE_OUT_SIGS 3 #define NR_V8ETM_INOUT_SIGS 4 /* CTI device tree trigger connection node keyword */ #define CTI_DT_CONNS "trig-conns" /* CTI device tree connection property keywords */ #define CTI_DT_V8ARCH_COMPAT "arm,coresight-cti-v8-arch" #define CTI_DT_CSDEV_ASSOC "arm,cs-dev-assoc" #define CTI_DT_TRIGIN_SIGS "arm,trig-in-sigs" #define CTI_DT_TRIGOUT_SIGS "arm,trig-out-sigs" #define CTI_DT_TRIGIN_TYPES "arm,trig-in-types" #define CTI_DT_TRIGOUT_TYPES "arm,trig-out-types" #define CTI_DT_FILTER_OUT_SIGS "arm,trig-filters" #define CTI_DT_CONN_NAME "arm,trig-conn-name" #define CTI_DT_CTM_ID "arm,cti-ctm-id" #ifdef CONFIG_OF /* * CTI can be bound to a CPU, or a system device. * CPU can be declared at the device top level or in a connections node * so need to check relative to node not device. */ static int of_cti_get_cpu_at_node(const struct device_node *node) { int cpu; struct device_node *dn; if (node == NULL) return -1; dn = of_parse_phandle(node, "cpu", 0); /* CTI affinity defaults to no cpu */ if (!dn) return -1; cpu = of_cpu_node_to_id(dn); of_node_put(dn); /* No Affinity if no cpu nodes are found */ return (cpu < 0) ? -1 : cpu; } #else static int of_cti_get_cpu_at_node(const struct device_node *node) { return -1; } #endif /* * CTI can be bound to a CPU, or a system device. * CPU can be declared at the device top level or in a connections node * so need to check relative to node not device. */ static int cti_plat_get_cpu_at_node(struct fwnode_handle *fwnode) { if (is_of_node(fwnode)) return of_cti_get_cpu_at_node(to_of_node(fwnode)); return -1; } const char *cti_plat_get_node_name(struct fwnode_handle *fwnode) { if (is_of_node(fwnode)) return of_node_full_name(to_of_node(fwnode)); return "unknown"; } /* * Extract a name from the fwnode. * If the device associated with the node is a coresight_device, then return * that name and the coresight_device pointer, otherwise return the node name. */ static const char * cti_plat_get_csdev_or_node_name(struct fwnode_handle *fwnode, struct coresight_device **csdev) { const char *name = NULL; *csdev = coresight_find_csdev_by_fwnode(fwnode); if (*csdev) name = dev_name(&(*csdev)->dev); else name = cti_plat_get_node_name(fwnode); return name; } static bool cti_plat_node_name_eq(struct fwnode_handle *fwnode, const char *name) { if (is_of_node(fwnode)) return of_node_name_eq(to_of_node(fwnode), name); return false; } static int cti_plat_create_v8_etm_connection(struct device *dev, struct cti_drvdata *drvdata) { int ret = -ENOMEM, i; struct fwnode_handle *root_fwnode, *cs_fwnode; const char *assoc_name = NULL; struct coresight_device *csdev; struct cti_trig_con *tc = NULL; root_fwnode = dev_fwnode(dev); if (IS_ERR_OR_NULL(root_fwnode)) return -EINVAL; /* Can optionally have an etm node - return if not */ cs_fwnode = fwnode_find_reference(root_fwnode, CTI_DT_CSDEV_ASSOC, 0); if (IS_ERR(cs_fwnode)) return 0; /* allocate memory */ tc = cti_allocate_trig_con(dev, NR_V8ETM_INOUT_SIGS, NR_V8ETM_INOUT_SIGS); if (!tc) goto create_v8_etm_out; /* build connection data */ tc->con_in->used_mask = 0xF0; /* sigs <4,5,6,7> */ tc->con_out->used_mask = 0xF0; /* sigs <4,5,6,7> */ /* * The EXTOUT type signals from the ETM are connected to a set of input * triggers on the CTI, the EXTIN being connected to output triggers. */ for (i = 0; i < NR_V8ETM_INOUT_SIGS; i++) { tc->con_in->sig_types[i] = ETM_EXTOUT; tc->con_out->sig_types[i] = ETM_EXTIN; } /* * We look to see if the ETM coresight device associated with this * handle has been registered with the system - i.e. probed before * this CTI. If so csdev will be non NULL and we can use the device * name and pass the csdev to the connection entry function where * the association will be recorded. * If not, then simply record the name in the connection data, the * probing of the ETM will call into the CTI driver API to update the * association then. */ assoc_name = cti_plat_get_csdev_or_node_name(cs_fwnode, &csdev); ret = cti_add_connection_entry(dev, drvdata, tc, csdev, assoc_name); create_v8_etm_out: fwnode_handle_put(cs_fwnode); return ret; } /* * Create an architecturally defined v8 connection * must have a cpu, can have an ETM. */ static int cti_plat_create_v8_connections(struct device *dev, struct cti_drvdata *drvdata) { struct cti_device *cti_dev = &drvdata->ctidev; struct cti_trig_con *tc = NULL; int cpuid = 0; char cpu_name_str[16]; int ret = -ENOMEM; /* Must have a cpu node */ cpuid = cti_plat_get_cpu_at_node(dev_fwnode(dev)); if (cpuid < 0) { dev_warn(dev, "ARM v8 architectural CTI connection: missing cpu\n"); return -EINVAL; } cti_dev->cpu = cpuid; /* Allocate the v8 cpu connection memory */ tc = cti_allocate_trig_con(dev, NR_V8PE_IN_SIGS, NR_V8PE_OUT_SIGS); if (!tc) goto of_create_v8_out; /* Set the v8 PE CTI connection data */ tc->con_in->used_mask = 0x3; /* sigs <0 1> */ tc->con_in->sig_types[0] = PE_DBGTRIGGER; tc->con_in->sig_types[1] = PE_PMUIRQ; tc->con_out->used_mask = 0x7; /* sigs <0 1 2 > */ tc->con_out->sig_types[0] = PE_EDBGREQ; tc->con_out->sig_types[1] = PE_DBGRESTART; tc->con_out->sig_types[2] = PE_CTIIRQ; scnprintf(cpu_name_str, sizeof(cpu_name_str), "cpu%d", cpuid); ret = cti_add_connection_entry(dev, drvdata, tc, NULL, cpu_name_str); if (ret) goto of_create_v8_out; /* Create the v8 ETM associated connection */ ret = cti_plat_create_v8_etm_connection(dev, drvdata); if (ret) goto of_create_v8_out; /* filter pe_edbgreq - PE trigout sig <0> */ drvdata->config.trig_out_filter |= 0x1; of_create_v8_out: return ret; } static int cti_plat_check_v8_arch_compatible(struct device *dev) { struct fwnode_handle *fwnode = dev_fwnode(dev); if (is_of_node(fwnode)) return of_device_is_compatible(to_of_node(fwnode), CTI_DT_V8ARCH_COMPAT); return 0; } static int cti_plat_count_sig_elements(const struct fwnode_handle *fwnode, const char *name) { int nr_elem = fwnode_property_count_u32(fwnode, name); return (nr_elem < 0 ? 0 : nr_elem); } static int cti_plat_read_trig_group(struct cti_trig_grp *tgrp, const struct fwnode_handle *fwnode, const char *grp_name) { int idx, err = 0; u32 *values; if (!tgrp->nr_sigs) return 0; values = kcalloc(tgrp->nr_sigs, sizeof(u32), GFP_KERNEL); if (!values) return -ENOMEM; err = fwnode_property_read_u32_array(fwnode, grp_name, values, tgrp->nr_sigs); if (!err) { /* set the signal usage mask */ for (idx = 0; idx < tgrp->nr_sigs; idx++) tgrp->used_mask |= BIT(values[idx]); } kfree(values); return err; } static int cti_plat_read_trig_types(struct cti_trig_grp *tgrp, const struct fwnode_handle *fwnode, const char *type_name) { int items, err = 0, nr_sigs; u32 *values = NULL, i; /* allocate an array according to number of signals in connection */ nr_sigs = tgrp->nr_sigs; if (!nr_sigs) return 0; /* see if any types have been included in the device description */ items = cti_plat_count_sig_elements(fwnode, type_name); if (items > nr_sigs) return -EINVAL; /* need an array to store the values iff there are any */ if (items) { values = kcalloc(items, sizeof(u32), GFP_KERNEL); if (!values) return -ENOMEM; err = fwnode_property_read_u32_array(fwnode, type_name, values, items); if (err) goto read_trig_types_out; } /* * Match type id to signal index, 1st type to 1st index etc. * If fewer types than signals default remainder to GEN_IO. */ for (i = 0; i < nr_sigs; i++) { if (i < items) { tgrp->sig_types[i] = values[i] < CTI_TRIG_MAX ? values[i] : GEN_IO; } else { tgrp->sig_types[i] = GEN_IO; } } read_trig_types_out: kfree(values); return err; } static int cti_plat_process_filter_sigs(struct cti_drvdata *drvdata, const struct fwnode_handle *fwnode) { struct cti_trig_grp *tg = NULL; int err = 0, nr_filter_sigs; nr_filter_sigs = cti_plat_count_sig_elements(fwnode, CTI_DT_FILTER_OUT_SIGS); if (nr_filter_sigs == 0) return 0; if (nr_filter_sigs > drvdata->config.nr_trig_max) return -EINVAL; tg = kzalloc(sizeof(*tg), GFP_KERNEL); if (!tg) return -ENOMEM; err = cti_plat_read_trig_group(tg, fwnode, CTI_DT_FILTER_OUT_SIGS); if (!err) drvdata->config.trig_out_filter |= tg->used_mask; kfree(tg); return err; } static int cti_plat_create_connection(struct device *dev, struct cti_drvdata *drvdata, struct fwnode_handle *fwnode) { struct cti_trig_con *tc = NULL; int cpuid = -1, err = 0; struct coresight_device *csdev = NULL; const char *assoc_name = "unknown"; char cpu_name_str[16]; int nr_sigs_in, nr_sigs_out; /* look to see how many in and out signals we have */ nr_sigs_in = cti_plat_count_sig_elements(fwnode, CTI_DT_TRIGIN_SIGS); nr_sigs_out = cti_plat_count_sig_elements(fwnode, CTI_DT_TRIGOUT_SIGS); if ((nr_sigs_in > drvdata->config.nr_trig_max) || (nr_sigs_out > drvdata->config.nr_trig_max)) return -EINVAL; tc = cti_allocate_trig_con(dev, nr_sigs_in, nr_sigs_out); if (!tc) return -ENOMEM; /* look for the signals properties. */ err = cti_plat_read_trig_group(tc->con_in, fwnode, CTI_DT_TRIGIN_SIGS); if (err) goto create_con_err; err = cti_plat_read_trig_types(tc->con_in, fwnode, CTI_DT_TRIGIN_TYPES); if (err) goto create_con_err; err = cti_plat_read_trig_group(tc->con_out, fwnode, CTI_DT_TRIGOUT_SIGS); if (err) goto create_con_err; err = cti_plat_read_trig_types(tc->con_out, fwnode, CTI_DT_TRIGOUT_TYPES); if (err) goto create_con_err; err = cti_plat_process_filter_sigs(drvdata, fwnode); if (err) goto create_con_err; /* read the connection name if set - may be overridden by later */ fwnode_property_read_string(fwnode, CTI_DT_CONN_NAME, &assoc_name); /* associated cpu ? */ cpuid = cti_plat_get_cpu_at_node(fwnode); if (cpuid >= 0) { drvdata->ctidev.cpu = cpuid; scnprintf(cpu_name_str, sizeof(cpu_name_str), "cpu%d", cpuid); assoc_name = cpu_name_str; } else { /* associated device ? */ struct fwnode_handle *cs_fwnode = fwnode_find_reference(fwnode, CTI_DT_CSDEV_ASSOC, 0); if (!IS_ERR(cs_fwnode)) { assoc_name = cti_plat_get_csdev_or_node_name(cs_fwnode, &csdev); fwnode_handle_put(cs_fwnode); } } /* set up a connection */ err = cti_add_connection_entry(dev, drvdata, tc, csdev, assoc_name); create_con_err: return err; } static int cti_plat_create_impdef_connections(struct device *dev, struct cti_drvdata *drvdata) { int rc = 0; struct fwnode_handle *fwnode = dev_fwnode(dev); struct fwnode_handle *child = NULL; if (IS_ERR_OR_NULL(fwnode)) return -EINVAL; fwnode_for_each_child_node(fwnode, child) { if (cti_plat_node_name_eq(child, CTI_DT_CONNS)) rc = cti_plat_create_connection(dev, drvdata, child); if (rc != 0) break; } fwnode_handle_put(child); return rc; } /* get the hardware configuration & connection data. */ static int cti_plat_get_hw_data(struct device *dev, struct cti_drvdata *drvdata) { int rc = 0; struct cti_device *cti_dev = &drvdata->ctidev; /* get any CTM ID - defaults to 0 */ device_property_read_u32(dev, CTI_DT_CTM_ID, &cti_dev->ctm_id); /* check for a v8 architectural CTI device */ if (cti_plat_check_v8_arch_compatible(dev)) rc = cti_plat_create_v8_connections(dev, drvdata); else rc = cti_plat_create_impdef_connections(dev, drvdata); if (rc) return rc; /* if no connections, just add a single default based on max IN-OUT */ if (cti_dev->nr_trig_con == 0) rc = cti_add_default_connection(dev, drvdata); return rc; } struct coresight_platform_data * coresight_cti_get_platform_data(struct device *dev) { int ret = -ENOENT; struct coresight_platform_data *pdata = NULL; struct fwnode_handle *fwnode = dev_fwnode(dev); struct cti_drvdata *drvdata = dev_get_drvdata(dev); if (IS_ERR_OR_NULL(fwnode)) goto error; /* * Alloc platform data but leave it zero init. CTI does not use the * same connection infrastructuree as trace path components but an * empty struct enables us to use the standard coresight component * registration code. */ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { ret = -ENOMEM; goto error; } /* get some CTI specifics */ ret = cti_plat_get_hw_data(dev, drvdata); if (!ret) return pdata; error: return ERR_PTR(ret); }