# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/samsung,exynos4210-csis.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS)

maintainers:
  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
  - Sylwester Nawrocki <s.nawrocki@samsung.com>

properties:
  compatible:
    enum:
      - samsung,s5pv210-csis
      - samsung,exynos4210-csis
      - samsung,exynos4212-csis
      - samsung,exynos5250-csis

  reg:
    maxItems: 1

  '#address-cells':
    const: 1

  '#size-cells':
    const: 0

  bus-width:
    $ref: /schemas/types.yaml#/definitions/uint32
    enum: [2, 4]
    description:
      Number of data lines supported.

  clocks:
    maxItems: 2

  clock-names:
    items:
      - const: csis
      - const: sclk_csis

  clock-frequency:
    default: 166000000
    description:
      The IP's main (system bus) clock frequency in Hz.

  interrupts:
    maxItems: 1

  phys:
    maxItems: 1

  phy-names:
    items:
      - const: csis

  power-domains:
    maxItems: 1

  vddio-supply:
    description: MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V).

  vddcore-supply:
    description: MIPI CSIS Core voltage supply (e.g. 1.1V).

patternProperties:
  "^port@[34]$":
    $ref: /schemas/graph.yaml#/$defs/port-base
    additionalProperties: false
    description:
      Camera input port.

    properties:
      reg:
        enum: [3, 4]

      endpoint:
        $ref: video-interfaces.yaml#
        unevaluatedProperties: false

        properties:
          data-lanes:
            minItems: 1
            maxItems: 4

          samsung,csis-hs-settle:
            $ref: /schemas/types.yaml#/definitions/uint32
            description: Differential receiver (HS-RX) settle time.

          samsung,csis-wclk:
            type: boolean
            description:
              CSI-2 wrapper clock selection. If this property is present external clock
              from CMU will be used, or the bus clock if it's not specified.

        required:
          - data-lanes

    required:
      - reg

required:
  - compatible
  - reg
  - bus-width
  - clocks
  - clock-names
  - interrupts
  - vddio-supply
  - vddcore-supply

anyOf:
  - required:
      - port@3
  - required:
      - port@4

allOf:
  - if:
      required:
        - samsung,isp-wb
    then:
      required:
        - samsung,sysreg

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/exynos4.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    csis@11890000 {
        compatible = "samsung,exynos4210-csis";
        reg = <0x11890000 0x4000>;
        clocks = <&clock CLK_CSIS1>,
                 <&clock CLK_SCLK_CSIS1>;
        clock-names = "csis", "sclk_csis";
        assigned-clocks = <&clock CLK_MOUT_CSIS1>,
                          <&clock CLK_SCLK_CSIS1>;
        assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
        assigned-clock-rates = <0>, <176000000>;

        interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;

        bus-width = <2>;
        power-domains = <&pd_cam>;
        phys = <&mipi_phy 2>;
        phy-names = "csis";

        vddcore-supply = <&ldo8_reg>;
        vddio-supply = <&ldo10_reg>;

        #address-cells = <1>;
        #size-cells = <0>;

        /* Camera D (4) MIPI CSI-2 (CSIS1) */
        port@4 {
            reg = <4>;

            endpoint {
                remote-endpoint = <&is_s5k6a3_ep>;
                data-lanes = <1>;
                samsung,csis-hs-settle = <18>;
                samsung,csis-wclk;
            };
        };
    };