# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/hwmon/sensirion,sht30.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Sensirion SHT3x and GXCAS GXHT30 humidity and temperature sensors
maintainers:
- Zaixiang Xu <zaixiang.xu.dev@gmail.com>
properties:
compatible:
oneOf:
- enum:
- sensirion,sht30
- sensirion,sts30
- items:
- enum:
- gxcas,gxht30
- sensirion,sht31
- sensirion,sht35
- sensirion,sht85
- const: sensirion,sht30
- items:
- enum:
- sensirion,sts31
- sensirion,sts32
- sensirion,sts35
- const: sensirion,sts30
reg:
maxItems: 1
vdd-supply:
description: Regulator that provides power to the VDD pin.
reset-gpios:
maxItems: 1
description:
GPIO connected to the nRESET pin. Active low.
interrupts:
maxItems: 1
description:
Interrupt connected to the ALERT pin.
required:
- compatible
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
humidity-sensor@44 {
compatible = "gxcas,gxht30", "sensirion,sht30";
reg = <0x44>;
vdd-supply = <&vcc_3v3_reg>;
reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio1>;
interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
};
};