# SPDX-License-Identifier: GPL-2.0-only
menu "Platform selection"

config ARCH_ACTIONS
	bool "Actions Semi Platforms"
	select OWL_TIMER
	select PINCTRL
	help
	  This enables support for the Actions Semiconductor S900 SoC family.

config ARCH_AIROHA
	bool "Airoha SoC Support"
	select ARM_PSCI
	select HAVE_ARM_ARCH_TIMER
	help
	  This enables support for the ARM64 based Airoha SoCs.

config ARCH_SUNXI
	bool "Allwinner sunxi 64-bit SoC Family"
	select ARCH_HAS_RESET_CONTROLLER
	select PINCTRL
	select RESET_CONTROLLER
	select SUN4I_TIMER
	select SUN6I_R_INTC
	select SUNXI_NMI_INTC
	help
	  This enables support for Allwinner sunxi based SoCs like the A64.

config ARCH_ALPINE
	bool "Annapurna Labs Alpine platform"
	select ALPINE_MSI if PCI
	help
	  This enables support for the Annapurna Labs Alpine
	  Soc family.

config ARCH_APPLE
	bool "Apple Silicon SoC family"
	select APPLE_AIC
	select APPLE_PMGR_PWRSTATE if PM
	help
	  This enables support for Apple's in-house ARM SoC family, such
	  as the Apple M1.

config ARCH_ARTPEC
	bool "Axis Communications ARTPEC SoC Family"
	depends on ARCH_EXYNOS
	select ARM_GIC
	help
	   This enables support for the ARMv8 based ARTPEC SoC Family.

config ARCH_ASPEED
	bool "Aspeed SoC family"
	help
	  This enables support for ASPEED's SoC family, such as the
	  ast27XX 8th generation Baseboard Management Controller (BMC).

config ARCH_AXIADO
	bool "Axiado SoC Family"
	select GPIOLIB
	help
	  This enables support for Axiado SoC family like AX3000

menuconfig ARCH_BCM
	bool "Broadcom SoC Support"

if ARCH_BCM

config ARCH_BCM2835
	bool "Broadcom BCM2835 family"
	select TIMER_OF
	select GPIOLIB
	select MFD_CORE
	select PINCTRL
	select PINCTRL_BCM2835
	select ARM_AMBA
	select ARM_GIC
	select ARM_TIMER_SP804
	help
	  This enables support for the Broadcom BCM2837 and BCM2711 SoC.
	  These SoCs are used in the Raspberry Pi 3 and 4 devices.

config ARCH_BCM_IPROC
	bool "Broadcom iProc SoC Family"
	select COMMON_CLK_IPROC
	select GPIOLIB
	select PINCTRL
	help
	  This enables support for Broadcom iProc based SoCs

config ARCH_BCMBCA
	bool "Broadcom Broadband Carrier Access (BCA) origin SoC"
	select GPIOLIB
	help
	  Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based
	  BCA chipset.

	  This enables support for Broadcom BCA ARM-based broadband chipsets,
	  including the DSL, PON and Wireless family of chips.

config ARCH_BRCMSTB
	bool "Broadcom Set-Top-Box SoCs"
	select ARCH_HAS_RESET_CONTROLLER
	select GENERIC_IRQ_CHIP
	select PINCTRL
	help
	  This enables support for Broadcom's ARMv8 Set Top Box SoCs

endif

config ARCH_BERLIN
	bool "Marvell Berlin SoC Family"
	select DW_APB_ICTL
	select DW_APB_TIMER_OF
	select GPIOLIB
	select PINCTRL
	help
	  This enables support for Marvell Berlin SoC Family

config ARCH_BITMAIN
	bool "Bitmain SoC Platforms"
	help
	  This enables support for the Bitmain SoC Family.

config ARCH_BLAIZE
	bool "Blaize SoC Platforms"
	help
	  This enables support for the Blaize SoC family

config ARCH_BST
	bool "Black Sesame Technologies SoC Family"
	help
	  This enables support for Black Sesame Technologies (BST) SoC family.
	  BST produces automotive-grade system-on-chips for intelligent driving,
	  focusing on computer vision and AI capabilities. The BST C1200 family
	  includes SoCs for ADAS and autonomous driving applications.

config ARCH_CIX
	bool "Cixtech SoC family"
	help
	  This enables support for the Cixtech SoC family,
	  like P1(sky1).

config ARCH_EXYNOS
	bool "Samsung Exynos SoC family"
	select COMMON_CLK_SAMSUNG
	select CLKSRC_EXYNOS_MCT
	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
	select EXYNOS_PMU
	select PINCTRL
	select PINCTRL_EXYNOS
	select PM_GENERIC_DOMAINS if PM
	select SOC_SAMSUNG
	help
	  This enables support for ARMv8 based Samsung Exynos SoC family.

config ARCH_GOOGLE
	bool "Google-Designed SoC family"
	help
	  This enables support for Google Tensor SoCs starting at the
	  Google Tensor G5 (Laguna) found in Pixel 10 and later phones.
	  Tensor G1 to G4 are offshoots of the Exynos family and are
	  enabled via ARCH_EXYNOS.

config ARCH_K3
	bool "Texas Instruments Inc. K3 multicore SoC architecture"
	select SOC_TI
	select TI_K3_SOCINFO
	help
	  This enables support for Texas Instruments' K3 multicore SoC
	  architecture.

config ARCH_LG1K
	bool "LG Electronics LG1K SoC Family"
	help
	  This enables support for LG Electronics LG1K SoC Family

config ARCH_HISI
	bool "Hisilicon SoC Family"
	select ARM_TIMER_SP804
	select HISILICON_IRQ_MBIGEN if PCI
	select PINCTRL
	help
	  This enables support for Hisilicon ARMv8 SoC family

config ARCH_KEEMBAY
	bool "Keem Bay SoC"
	help
	  This enables support for Intel Movidius SoC code-named Keem Bay.

config ARCH_MEDIATEK
	bool "MediaTek SoC Family"
	select ARM_GIC
	select PINCTRL
	select MTK_TIMER
	help
	  This enables support for MediaTek MT27xx, MT65xx, MT76xx
	  & MT81xx ARMv8 SoCs

config ARCH_MESON
	bool "Amlogic Platforms"
	help
	  This enables support for the arm64 based Amlogic SoCs
	  such as the s905, S905X/D, S912, A113X/D or S905X/D2

menuconfig ARCH_MICROCHIP
	bool "Microchip SoC support"

if ARCH_MICROCHIP

config ARCH_LAN969X
	bool "Microchip LAN969X SoC family"
	select PINCTRL
	select DW_APB_TIMER_OF
	help
	  This enables support for the Microchip LAN969X ARMv8-based
	  SoC family of TSN-capable gigabit switches.

	  The LAN969X Ethernet switch family provides a rich set of
	  switching features such as advanced TCAM-based VLAN and QoS
	  processing enabling delivery of differentiated services, and
	  security through TCAM-based frame processing using versatile
	  content aware processor (VCAP).

config ARCH_SPARX5
	bool "Microchip Sparx5 SoC family"
	select PINCTRL
	select DW_APB_TIMER_OF
	help
	  This enables support for the Microchip Sparx5 ARMv8-based
	  SoC family of TSN-capable gigabit switches.

	  The SparX-5 Ethernet switch family provides a rich set of
	  switching features such as advanced TCAM-based VLAN and QoS
	  processing enabling delivery of differentiated services, and
	  security through TCAM-based frame processing using versatile
	  content aware processor (VCAP).

endif

config ARCH_MMP
	bool "Marvell MMP SoC Family"
	select PINCTRL
	select PINCTRL_SINGLE
	help
	  This enables support for Marvell MMP SoC family, currently
	  supporting PXA1908 aka IAP140.

config ARCH_MVEBU
	bool "Marvell EBU SoC Family"
	select ARMADA_AP806_SYSCON
	select ARMADA_CP110_SYSCON
	select ARMADA_37XX_CLK
	select GPIOLIB
	select GPIOLIB_IRQCHIP
	select MVEBU_GICP
	select MVEBU_ICU
	select MVEBU_ODMI
	select MVEBU_PIC
	select MVEBU_SEI
	select PINCTRL
	select PINCTRL_ARMADA_37XX
	select PINCTRL_ARMADA_AP806
	select PINCTRL_ARMADA_CP110
	select PINCTRL_AC5
	help
	  This enables support for Marvell EBU family, including:
	   - Armada 3700 SoC Family
	   - Armada 7K SoC Family
	   - Armada 8K SoC Family
	   - 98DX2530 SoC Family

menuconfig ARCH_NXP
	bool "NXP SoC support"

if ARCH_NXP

config ARCH_LAYERSCAPE
	bool "Freescale Layerscape SoC family"
	help
	  This enables support for the Freescale Layerscape SoC family.

config ARCH_MXC
	bool "NXP i.MX SoC family"
	select ARM64_ERRATUM_843419
	select ARM64_ERRATUM_845719 if COMPAT
	select IMX_GPCV2
	select IMX_GPCV2_PM_DOMAINS
	select PM
	select PM_GENERIC_DOMAINS
	select SOC_BUS
	select TIMER_IMX_SYS_CTR
	help
	  This enables support for the ARMv8 based SoCs in the
	  NXP i.MX family.

config ARCH_S32
	bool "NXP S32 SoC Family"
	help
	  This enables support for the NXP S32 family of processors.

endif

config ARCH_MA35
	bool "Nuvoton MA35 Architecture"
	select GPIOLIB
	select PINCTRL
	select RESET_CONTROLLER
	help
	  This enables support for the ARMv8 based Nuvoton MA35 series SoCs.

config ARCH_NPCM
	bool "Nuvoton NPCM Architecture"
	select PINCTRL
	select GPIOLIB
	select NPCM7XX_TIMER
	select RESET_CONTROLLER
	select MFD_SYSCON
	help
	  General support for NPCM8xx BMC (Arbel).
	  Nuvoton NPCM8xx BMC based on the Cortex A35.

config ARCH_PENSANDO
	bool "AMD Pensando Platforms"
	help
	  This enables support for the ARMv8 based AMD Pensando SoC
	  family to include the Elba SoC.

	  AMD Pensando SoCs support a range of Distributed Services
	  Cards in PCIe format installed into servers.  The Elba
	  SoC includes 16 Cortex A-72 CPU cores, 144 P4-programmable
	  cores for a minimal latency/jitter datapath, and network
	  interfaces up to 200 Gb/s.

config ARCH_QCOM
	bool "Qualcomm Platforms"
	select GPIOLIB
	select PINCTRL
	select HAVE_PWRCTRL if PCI
	help
	  This enables support for the ARMv8 based Qualcomm chipsets.

config ARCH_REALTEK
	bool "Realtek Platforms"
	select RESET_CONTROLLER
	help
	  This enables support for the ARMv8 based Realtek chipsets,
	  like the RTD1295.

config ARCH_RENESAS
	bool "Renesas SoC Platforms"
	help
	  This enables support for the ARMv8 based Renesas SoCs.

config ARCH_ROCKCHIP
	bool "Rockchip Platforms"
	select ARCH_HAS_RESET_CONTROLLER
	select PINCTRL
	select PM
	select ROCKCHIP_TIMER
	help
	  This enables support for the ARMv8 based Rockchip chipsets,
	  like the RK3368.

config ARCH_SEATTLE
	bool "AMD Seattle SoC Family"
	help
	  This enables support for AMD Seattle SOC Family

config ARCH_INTEL_SOCFPGA
	bool "Intel's SoCFPGA ARMv8 Families"
	select ALTERA_ERRATUM_AGILEX5_2_1_23
	help
	  This enables support for Intel's SoCFPGA ARMv8 families:
	  Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform,
	  Agilex and eASIC N5X.

config ARCH_SOPHGO
	bool "Sophgo SoCs"
	select ARCH_HAS_RESET_CONTROLLER
	help
	  This enables support for Sophgo SoC platform hardware.

config ARCH_STM32
	bool "STMicroelectronics STM32 SoC Family"
	select GPIOLIB
	select PINCTRL
	select ARM_SCMI_PROTOCOL
	select REGULATOR
	select REGULATOR_ARM_SCMI
	select COMMON_CLK_SCMI
	select STM32_FIREWALL
	help
	  This enables support for ARMv8 based STMicroelectronics
	  STM32 family, including:
		- STM32MP21:
			- STM32MP211, STM32MP213, STM32MP215.
		- STM32MP23:
			- STM32MP231, STM32MP233, STM32MP235.
		- STM32MP25:
			- STM32MP251, STM32MP253, STM32MP255 and STM32MP257.

config ARCH_SYNQUACER
	bool "Socionext SynQuacer SoC Family"
	select IRQ_FASTEOI_HIERARCHY_HANDLERS

config ARCH_TEGRA
	bool "NVIDIA Tegra SoC Family"
	select ARCH_HAS_RESET_CONTROLLER
	select ARM_GIC_PM
	select CLKSRC_MMIO
	select TIMER_OF
	select GPIOLIB
	select PINCTRL
	select PM
	select PM_GENERIC_DOMAINS
	select RESET_CONTROLLER
	help
	  This enables support for the NVIDIA Tegra SoC family.

config ARCH_TESLA_FSD
	bool "Tesla platform"
	depends on ARCH_EXYNOS
	help
	  Support for ARMv8 based Tesla platforms.

config ARCH_SPRD
	bool "Spreadtrum SoC platform"
	help
	  Support for Spreadtrum ARM based SoCs

config ARCH_THUNDER
	bool "Cavium Inc. Thunder SoC Family"
	help
	  This enables support for Cavium's Thunder Family of SoCs.

config ARCH_THUNDER2
	bool "Cavium ThunderX2 Server Processors"
	select GPIOLIB
	help
	  This enables support for Cavium's ThunderX2 CN99XX family of
	  server processors.

config ARCH_UNIPHIER
	bool "Socionext UniPhier SoC Family"
	select ARCH_HAS_RESET_CONTROLLER
	select PINCTRL
	select RESET_CONTROLLER
	help
	  This enables support for Socionext UniPhier SoC family.

config ARCH_VEXPRESS
	bool "ARM Ltd Platforms"
	select GPIOLIB
	select PM
	select PM_GENERIC_DOMAINS
	help
	  This enables support for the ARM Ltd Platforms.

config ARCH_VISCONTI
	bool "Toshiba Visconti SoC Family"
	select PINCTRL
	select PINCTRL_VISCONTI
	help
	  This enables support for Toshiba Visconti SoCs Family.

config ARCH_XGENE
	bool "AppliedMicro X-Gene SOC Family"
	help
	  This enables support for AppliedMicro X-Gene SOC Family

config ARCH_ZYNQMP
	bool "Xilinx ZynqMP Family"
	help
	  This enables support for Xilinx ZynqMP Family

endmenu # "Platform selection"