// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/input/gpio-keys.h>
/ {
aliases {
serial0 = &{/bus@0/serial@c4e0000};
serial1 = &{/bus@0/serial@c5a0000};
};
chosen {
stdout-path = "serial0:115200n8";
};
bus@0 {
rtc@c2c0000 {
status = "okay";
};
pwm@c6a0000 {
status = "okay";
};
};
bus@8100000000 {
i2c@c640000 {
eeprom@56 {
compatible = "atmel,24c02";
reg = <0x56>;
label = "system";
address-width = <8>;
pagesize = <8>;
size = <256>;
read-only;
};
};
};
fan: pwm-fan {
compatible = "pwm-fan";
cooling-levels = <77 102 140 192 255>;
pwms = <&pwm4 0 40000>;
#cooling-cells = <2>;
};
gpio-keys {
compatible = "gpio-keys";
key-force-recovery {
label = "Force Recovery";
gpios = <&gpio_aon TEGRA264_AON_GPIO(EE, 1) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_SLEEP>;
};
key-power {
label = "Power";
gpios = <&gpio_aon TEGRA264_AON_GPIO(AA, 5) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_POWER>;
wakeup-event-action = <EV_ACT_ASSERTED>;
wakeup-source;
};
};
thermal-zones {
tj-thermal {
trips {
tj_trip_active0: active-0 {
temperature = <80000>;
hysteresis = <0>;
type = "active";
};
tj_trip_active1: active-1 {
temperature = <86000>;
hysteresis = <0>;
type = "active";
};
tj_trip_active2: active-2 {
temperature = <91000>;
hysteresis = <0>;
type = "active";
};
tj_trip_active3: active-3 {
temperature = <100000>;
hysteresis = <0>;
type = "active";
};
};
cooling-maps {
map-active-0 {
cooling-device = <&fan 0 1>;
trip = <&tj_trip_active0>;
};
map-active-1 {
cooling-device = <&fan 1 2>;
trip = <&tj_trip_active1>;
};
map-active-2 {
cooling-device = <&fan 2 3>;
trip = <&tj_trip_active2>;
};
map-active-3 {
cooling-device = <&fan 3 4>;
trip = <&tj_trip_active3>;
};
};
};
};
};