// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2019 Hardkernel Co., Ltd * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com> */ /dts-v1/; #include "rk3326-odroid-go.dtsi" / { model = "ODROID-GO Super"; compatible = "hardkernel,rk3326-odroid-go3", "rockchip,rk3326"; joystick_mux_controller: mux-controller { compatible = "gpio-mux"; pinctrl = <&mux_en_pins>; #mux-control-cells = <0>; mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>, <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; }; joystick_mux: adc-mux { compatible = "io-channel-mux"; io-channels = <&saradc 1>; io-channel-names = "parent"; #io-channel-cells = <1>; mux-controls = <&joystick_mux_controller>; channels = "0", "1", "2", "3"; }; analog_sticks: adc-joystick { compatible = "adc-joystick"; io-channels = <&joystick_mux 0>, <&joystick_mux 1>, <&joystick_mux 2>, <&joystick_mux 3>; poll-interval = <60>; #address-cells = <1>; #size-cells = <0>; axis@0 { reg = <0>; abs-flat = <10>; abs-fuzz = <10>; abs-range = <180 800>; linux,code = <ABS_X>; }; axis@1 { reg = <1>; abs-flat = <10>; abs-fuzz = <10>; abs-range = <180 800>; linux,code = <ABS_RX>; }; axis@2 { reg = <2>; abs-flat = <10>; abs-fuzz = <10>; abs-range = <180 800>; linux,code = <ABS_Y>; }; axis@3 { reg = <3>; abs-flat = <10>; abs-fuzz = <10>; abs-range = <180 800>; linux,code = <ABS_RY>; }; }; battery: battery { compatible = "simple-battery"; charge-full-design-microamp-hours = <4000000>; charge-term-current-microamp = <300000>; constant-charge-current-max-microamp = <2000000>; constant-charge-voltage-max-microvolt = <4200000>; factory-internal-resistance-micro-ohms = <180000>; voltage-max-design-microvolt = <4100000>; voltage-min-design-microvolt = <3500000>; ocv-capacity-celsius = <20>; ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>, <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>, <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>, <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>, <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>, <3574170 0>; }; gpio-keys-vol { compatible = "gpio-keys"; autorepeat; pinctrl-0 = <&btn_pins_vol>; pinctrl-names = "default"; button-vol-down { gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>; label = "VOLUMEDOWN"; linux,code = <KEY_VOLUMEDOWN>; }; button-volume-up { gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; label = "VOLUMEUP"; linux,code = <KEY_VOLUMEUP>; }; }; }; /* f1 and f2 conflict with volume buttons */ /delete-node/ &btn_f1; /delete-node/ &btn_f2; &builtin_gamepad { button-sw19 { gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; label = "SELECT"; linux,code = <BTN_SELECT>; }; /* note that TR2 and TL2 are swapped */ button-sw20 { gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; label = "TOP-RIGHT 2"; linux,code = <BTN_TR2>; }; button-sw21 { gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; label = "TOP-LEFT 2"; linux,code = <BTN_TL2>; }; button-sw22 { gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; label = "START"; linux,code = <BTN_START>; }; }; &internal_display { compatible = "elida,kd50t048a", "sitronix,st7701"; reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; IOVCC-supply = <&vcc_lcd>; VCC-supply = <&vcc_lcd>; }; &rk817_charger { monitored-battery = <&battery>; }; &pinctrl { btns { btn_pins: btn-pins { rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>; }; btn_pins_vol: btn-pins-vol { rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; joystick { mux_en_pins: mux-pins { rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>; }; }; };