// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "shikra.dtsi"
#include "pm8150.dtsi"
/ {
aliases {
serial1 = &uart8;
};
gpio-key {
compatible = "gpio-keys";
label = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&vol_up_n>;
key-volume-up {
label = "Volume Up";
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
debounce-interval = <15>;
linux,can-disable;
};
};
thermal-zones {
sys-1-thermal {
thermal-sensors = <&pm8150_adc_tm 0>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
sys-2-thermal {
thermal-sensors = <&pm8150_adc_tm 1>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
sys-3-thermal {
thermal-sensors = <&pm8150_adc_tm 2>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
vreg_wcn_3p3: regulator-wcn-3p3 {
compatible = "regulator-fixed";
regulator-name = "wcn_3p3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
wcn3988-pmu {
compatible = "qcom,wcn3988-pmu";
pinctrl-0 = <&sw_ctrl_default>;
pinctrl-names = "default";
swctrl-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
vddio-supply = <&pm8150_s4>;
vddxo-supply = <&pm8150_l12>;
vddrf-supply = <&pm8150_l8>;
vddch0-supply = <&vreg_wcn_3p3>;
regulators {
vreg_pmu_io: ldo0 {
regulator-name = "vreg_pmu_io";
};
vreg_pmu_xo: ldo1 {
regulator-name = "vreg_pmu_xo";
};
vreg_pmu_rf: ldo2 {
regulator-name = "vreg_pmu_rf";
};
vreg_pmu_ch0: ldo3 {
regulator-name = "vreg_pmu_ch0";
};
vreg_pmu_ch1: ldo4 {
regulator-name = "vreg_pmu_ch1";
};
};
};
};
&pm8150_adc {
pinctrl-0 = <&pm8150_adc_gpio2_default>, <&pm8150_adc_gpio3_default>;
pinctrl-names = "default";
channel@4d {
reg = <ADC5_AMUX_THM1_100K_PU>;
label = "msm_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
channel@4e {
reg = <ADC5_AMUX_THM2_100K_PU>;
label = "quiet_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
channel@52 {
reg = <ADC5_GPIO1_100K_PU>;
label = "gnss_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
channel@55 {
reg = <ADC5_GPIO4_100K_PU>;
label = "pa_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
};
&pm8150_adc_tm {
status = "okay";
pa-therm@0 {
reg = <0>;
io-channels = <&pm8150_adc ADC5_GPIO4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
quiet-therm@1 {
reg = <1>;
io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
msm-therm@2 {
reg = <2>;
io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&pm8150_gpios {
pm8150_adc_gpio2_default: pm8150-adc-gpio2-state {
pins = "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
bias-high-impedance;
};
pm8150_adc_gpio3_default: pm8150-adc-gpio3-state {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
bias-high-impedance;
};
vol_up_n: vol-up-n-state {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
bias-pull-up;
power-source = <0>;
};
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&rpm_requests {
regulators {
compatible = "qcom,rpm-pm8150-regulators";
pm8150_s4: s4 {
regulator-min-microvolt = <1080000>;
regulator-max-microvolt = <2040000>;
};
pm8150_s5: s5 {
regulator-min-microvolt = <1574000>;
regulator-max-microvolt = <2040000>;
};
pm8150_s6: s6 {
regulator-min-microvolt = <382000>;
regulator-max-microvolt = <1352000>;
};
pm8150_s7: s7 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
};
pm8150_s8: s8 {
regulator-min-microvolt = <570000>;
regulator-max-microvolt = <650000>;
};
pm8150_l1: l1 {
regulator-min-microvolt = <312000>;
regulator-max-microvolt = <1304000>;
};
pm8150_l2: l2 {
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <3300000>;
};
pm8150_l3: l3 {
regulator-min-microvolt = <312000>;
regulator-max-microvolt = <1304000>;
};
pm8150_l4: l4 {
regulator-min-microvolt = <875000>;
regulator-max-microvolt = <975000>;
};
pm8150_l5: l5 {
regulator-min-microvolt = <788000>;
regulator-max-microvolt = <1050000>;
};
pm8150_l6: l6 {
regulator-min-microvolt = <875000>;
regulator-max-microvolt = <1000000>;
};
pm8150_l7: l7 {
regulator-min-microvolt = <1504000>;
regulator-max-microvolt = <2000000>;
};
pm8150_l8: l8 {
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1304000>;
};
pm8150_l9: l9 {
regulator-min-microvolt = <875000>;
regulator-max-microvolt = <1000000>;
};
pm8150_l10: l10 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3544000>;
};
pm8150_l11: l11 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1304000>;
};
pm8150_l12: l12 {
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <1950000>;
};
pm8150_l13: l13 {
regulator-min-microvolt = <2921000>;
regulator-max-microvolt = <3230000>;
};
pm8150_l14: l14 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1910000>;
};
pm8150_l15: l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1900000>;
};
pm8150_l16: l16 {
regulator-min-microvolt = <1504000>;
regulator-max-microvolt = <3544000>;
};
pm8150_l17: l17 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3544000>;
};
pm8150_l18: l18 {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <728000>;
};
};
};
&tlmm {
gpio-reserved-ranges = <6 4>, /* Fingerprint SPI */
<30 2>, /* NFC SPI */
<138 1>, /* NFC Secure IO */
<155 11>; /* eMMC Boot */
sw_ctrl_default: sw-ctrl-default-state {
pins = "gpio88";
function = "gpio";
bias-pull-down;
};
};
&uart8 {
status = "okay";
bluetooth {
compatible = "qcom,wcn3988-bt";
max-speed = <3200000>;
vddio-supply = <&vreg_pmu_io>;
vddxo-supply = <&vreg_pmu_xo>;
vddrf-supply = <&vreg_pmu_rf>;
vddch0-supply = <&vreg_pmu_ch0>;
};
};
&wifi {
vdd-0.8-cx-mx-supply = <&pm8150_s4>;
vdd-1.8-xo-supply = <&vreg_pmu_xo>;
vdd-1.3-rfa-supply = <&vreg_pmu_rf>;
vdd-3.3-ch0-supply = <&vreg_pmu_ch0>;
qcom,calibration-variant = "Shikra_EVK";
firmware-name = "shikra";
status = "okay";
};