# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Novatek NT35950-based display panels maintainers: - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> description: | The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels, with Static RAM for content retention in command mode and also supports video mode with VESA Frame Buffer Compression or Display Stream Compression on single, or dual dsi port(s). This DDIC is also capable of upscaling an input image to the panel's native resolution, for example it can upscale a 1920x1080 input to 3840x2160 with either bilinear interpolation or pixel duplication. allOf: - $ref: panel-common.yaml# properties: compatible: items: - enum: - sharp,ls055d1sx04 - const: novatek,nt35950 description: This indicates the panel manufacturer of the panel that is in turn using the NT35950 panel driver. The compatible string determines how the NT35950 panel driver shall be configured to work with the indicated panel. The novatek,nt35950 compatible shall always be provided as a fallback. reset-gpios: maxItems: 1 description: phandle of gpio for reset line - This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names (active high) avdd-supply: description: positive boost supply regulator avee-supply: description: negative boost supply regulator dvdd-supply: description: regulator that supplies the digital voltage vddio-supply: description: regulator that supplies the I/O voltage backlight: true ports: true reg: true required: - compatible - reg - reset-gpios - avdd-supply - avee-supply - dvdd-supply - vddio-supply additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> dsi0 { #address-cells = <1>; #size-cells = <0>; panel@0 { compatible = "sharp,ls055d1sx04", "novatek,nt35950"; reg = <0>; backlight = <&pmi8998_wled>; reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; avdd-supply = <&lab>; avee-supply = <&ibb>; dvdd-supply = <&disp_dvdd_vreg>; vddio-supply = <&vreg_l14a_1p85>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; panel_in0: endpoint { remote-endpoint = <&dsi0_out>; }; }; port@1 { reg = <1>; panel_in1: endpoint { remote-endpoint = <&dsi1_out>; }; }; }; }; }; ...