// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, The Linux Foundation. All rights reserved.
* Copyright (c) 2022, Linaro Limited
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/spmi/spmi.h>
#include "sa8540p.dtsi"
#include "sa8540p-pmics.dtsi"
/ {
model = "Qualcomm SA8295P ADP";
compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
aliases {
serial0 = &uart17;
};
chosen {
stdout-path = "serial0:115200n8";
};
dp2-connector {
compatible = "dp-connector";
label = "DP2";
type = "mini";
hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
port {
dp2_connector_in: endpoint {
remote-endpoint = <&mdss1_dp0_phy_out>;
};
};
};
dp3-connector {
compatible = "dp-connector";
label = "DP3";
type = "mini";
hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
port {
dp3_connector_in: endpoint {
remote-endpoint = <&mdss1_dp1_phy_out>;
};
};
};
edp0-connector {
compatible = "dp-connector";
label = "EDP0";
type = "mini";
hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
port {
edp0_connector_in: endpoint {
remote-endpoint = <&mdss0_dp2_phy_out>;
};
};
};
edp1-connector {
compatible = "dp-connector";
label = "EDP1";
type = "mini";
hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
port {
edp1_connector_in: endpoint {
remote-endpoint = <&mdss0_dp3_phy_out>;
};
};
};
edp2-connector {
compatible = "dp-connector";
label = "EDP2";
type = "mini";
hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
port {
edp2_connector_in: endpoint {
remote-endpoint = <&mdss1_dp2_phy_out>;
};
};
};
edp3-connector {
compatible = "dp-connector";
label = "EDP3";
type = "mini";
hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
port {
edp3_connector_in: endpoint {
remote-endpoint = <&mdss1_dp3_phy_out>;
};
};
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "a";
vreg_l3a: ldo3 {
regulator-name = "vreg_l3a";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5a: ldo5 {
regulator-name = "vreg_l5a";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a: ldo7 {
regulator-name = "vreg_l7a";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13a: ldo13 {
regulator-name = "vreg_l13a";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11a: ldo11 {
regulator-name = "vreg_l11a";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "c";
vreg_l1c: ldo1 {
regulator-name = "vreg_l1c";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c: ldo2 {
regulator-name = "vreg_l2c";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c: ldo3 {
regulator-name = "vreg_l3c";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c: ldo4 {
regulator-name = "vreg_l4c";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c: ldo6 {
regulator-name = "vreg_l6c";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c: ldo7 {
regulator-name = "vreg_l7c";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c: ldo10 {
regulator-name = "vreg_l10c";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17c: ldo17 {
regulator-name = "vreg_l17c";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-2 {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "g";
vreg_l3g: ldo3 {
regulator-name = "vreg_l3g";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7g: ldo7 {
regulator-name = "vreg_l7g";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8g: ldo8 {
regulator-name = "vreg_l8g";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11g: ldo11 {
regulator-name = "vreg_l11g";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&dispcc0 {
status = "okay";
};
&dispcc1 {
status = "okay";
};
&mdss0 {
status = "okay";
};
&mdss0_dp2 {
data-lanes = <0 1 2 3>;
status = "okay";
ports {
port@1 {
reg = <1>;
mdss0_dp2_phy_out: endpoint {
remote-endpoint = <&edp0_connector_in>;
};
};
};
};
&mdss0_dp2_phy {
vdda-phy-supply = <&vreg_l8g>;
vdda-pll-supply = <&vreg_l3g>;
status = "okay";
};
&mdss0_dp3 {
data-lanes = <0 1 2 3>;
status = "okay";
ports {
port@1 {
reg = <1>;
mdss0_dp3_phy_out: endpoint {
remote-endpoint = <&edp1_connector_in>;
};
};
};
};
&mdss0_dp3_phy {
vdda-phy-supply = <&vreg_l8g>;
vdda-pll-supply = <&vreg_l3g>;
status = "okay";
};
&mdss1 {
status = "okay";
};
&mdss1_dp0 {
data-lanes = <0 1 2 3>;
status = "okay";
ports {
port@1 {
reg = <1>;
mdss1_dp0_phy_out: endpoint {
remote-endpoint = <&dp2_connector_in>;
};
};
};
};
&mdss1_dp0_phy {
vdda-phy-supply = <&vreg_l11g>;
vdda-pll-supply = <&vreg_l3g>;
status = "okay";
};
&mdss1_dp1 {
data-lanes = <0 1 2 3>;
status = "okay";
ports {
port@1 {
reg = <1>;
mdss1_dp1_phy_out: endpoint {
remote-endpoint = <&dp3_connector_in>;
};
};
};
};
&mdss1_dp1_phy {
vdda-phy-supply = <&vreg_l11g>;
vdda-pll-supply = <&vreg_l3g>;
status = "okay";
};
&mdss1_dp2 {
data-lanes = <0 1 2 3>;
status = "okay";
ports {
port@1 {
reg = <1>;
mdss1_dp2_phy_out: endpoint {
remote-endpoint = <&edp2_connector_in>;
};
};
};
};
&mdss1_dp2_phy {
vdda-phy-supply = <&vreg_l11g>;
vdda-pll-supply = <&vreg_l3g>;
status = "okay";
};
&mdss1_dp3 {
data-lanes = <0 1 2 3>;
status = "okay";
ports {
port@1 {
reg = <1>;
mdss1_dp3_phy_out: endpoint {
remote-endpoint = <&edp3_connector_in>;
};
};
};
};
&mdss1_dp3_phy {
vdda-phy-supply = <&vreg_l11g>;
vdda-pll-supply = <&vreg_l3g>;
status = "okay";
};
&pcie2a {
perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pcie2a_default>;
status = "okay";
};
&pcie2a_phy {
vdda-phy-supply = <&vreg_l11a>;
vdda-pll-supply = <&vreg_l3a>;
status = "okay";
};
&pcie3a {
num-lanes = <2>;
perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pcie3a_default>;
status = "okay";
};
&pcie3a_phy {
vdda-phy-supply = <&vreg_l11a>;
vdda-pll-supply = <&vreg_l3a>;
status = "okay";
};
&pcie3b {
perst-gpios = <&tlmm 153 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pcie3b_default>;
status = "okay";
};
&pcie3b_phy {
vdda-phy-supply = <&vreg_l11a>;
vdda-pll-supply = <&vreg_l3a>;
status = "okay";
};
&pcie4 {
perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pcie4_default>;
status = "okay";
};
&pcie4_phy {
vdda-phy-supply = <&vreg_l11a>;
vdda-pll-supply = <&vreg_l3a>;
status = "okay";
};
&qup2 {
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/sa8540p/adsp.mbn";
status = "okay";
};
&remoteproc_nsp0 {
firmware-name = "qcom/sa8540p/cdsp.mbn";
status = "okay";
};
&remoteproc_nsp1 {
firmware-name = "qcom/sa8540p/cdsp1.mbn";
status = "okay";
};
&uart17 {
compatible = "qcom,geni-debug-uart";
status = "okay";
};
&ufs_mem_hc {
reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l17c>;
vcc-max-microamp = <800000>;
vccq-supply = <&vreg_l6c>;
vccq-max-microamp = <900000>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&vreg_l8g>;
vdda-pll-supply = <&vreg_l3g>;
status = "okay";
};
&ufs_card_hc {
reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l10c>;
vcc-max-microamp = <800000>;
vccq-supply = <&vreg_l3c>;
vccq-max-microamp = <900000>;
status = "okay";
};
&ufs_card_phy {
vdda-phy-supply = <&vreg_l8g>;
vdda-pll-supply = <&vreg_l3g>;
status = "okay";
};
&usb_0 {
status = "okay";
};
&usb_0_dwc3 {
/* TODO: Define USB-C connector properly */
dr_mode = "peripheral";
};
&usb_0_hsphy {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7a>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_0_qmpphy {
vdda-phy-supply = <&vreg_l3a>;
vdda-pll-supply = <&vreg_l5a>;
status = "okay";
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
/* TODO: Define USB-C connector properly */
dr_mode = "host";
};
&usb_1_hsphy {
vdda-pll-supply = <&vreg_l1c>;
vdda18-supply = <&vreg_l7c>;
vdda33-supply = <&vreg_l2c>;
status = "okay";
};
&usb_1_qmpphy {
vdda-phy-supply = <&vreg_l4c>;
vdda-pll-supply = <&vreg_l1c>;
status = "okay";
};
&usb_2_hsphy0 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_2_hsphy1 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_2_hsphy2 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_2_hsphy3 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_2_qmpphy0 {
vdda-phy-supply = <&vreg_l3a>;
vdda-pll-supply = <&vreg_l5a>;
status = "okay";
};
&usb_2_qmpphy1 {
vdda-phy-supply = <&vreg_l3a>;
vdda-pll-supply = <&vreg_l5a>;
status = "okay";
};
&xo_board_clk {
clock-frequency = <38400000>;
};
/* PINCTRL */
&tlmm {
pcie2a_default: pcie2a-default-state {
clkreq-n-pins {
pins = "gpio142";
function = "pcie2a_clkreq";
drive-strength = <2>;
bias-pull-up;
};
perst-n-pins {
pins = "gpio143";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
wake-n-pins {
pins = "gpio145";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
pcie3a_default: pcie3a-default-state {
clkreq-n-pins {
pins = "gpio150";
function = "pcie3a_clkreq";
drive-strength = <2>;
bias-pull-up;
};
perst-n-pins {
pins = "gpio151";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
wake-n-pins {
pins = "gpio56";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
pcie3b_default: pcie3b-default-state {
clkreq-n-pins {
pins = "gpio152";
function = "pcie3b_clkreq";
drive-strength = <2>;
bias-pull-up;
};
perst-n-pins {
pins = "gpio153";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
wake-n-pins {
pins = "gpio130";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
pcie4_default: pcie4-default-state {
clkreq-n-pins {
pins = "gpio140";
function = "pcie4_clkreq";
drive-strength = <2>;
bias-pull-up;
};
perst-n-pins {
pins = "gpio141";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
wake-n-pins {
pins = "gpio139";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
};