/* SPDX-License-Identifier: GPL-2.0 */ #ifndef __ASM_SH_HITACHI_SE_H #define __ASM_SH_HITACHI_SE_H /* * linux/include/asm-sh/hitachi_se.h * * Copyright (C) 2000 Kazumoto Kojima * * Hitachi SolutionEngine support */ #include <linux/sh_intc.h> /* Box specific addresses. */ #define PA_ROM 0x00000000 /* EPROM */ #define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ #define PA_FROM 0x01000000 /* EPROM */ #define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ #define PA_EXT1 0x04000000 #define PA_EXT1_SIZE 0x04000000 #define PA_EXT2 0x08000000 #define PA_EXT2_SIZE 0x04000000 #define PA_SDRAM 0x0c000000 #define PA_SDRAM_SIZE 0x04000000 #define PA_EXT4 0x12000000 #define PA_EXT4_SIZE 0x02000000 #define PA_EXT5 0x14000000 #define PA_EXT5_SIZE 0x04000000 #define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ #define PA_83902 0xb0000000 /* DP83902A */ #define PA_83902_IF 0xb0040000 /* DP83902A remote io port */ #define PA_83902_RST 0xb0080000 /* DP83902A reset port */ #define PA_SUPERIO 0xb0400000 /* SMC37C935A super io chip */ #define PA_DIPSW0 0xb0800000 /* Dip switch 5,6 */ #define PA_DIPSW1 0xb0800002 /* Dip switch 7,8 */ #define PA_LED 0xb0c00000 /* LED */ #if defined(CONFIG_CPU_SUBTYPE_SH7705) #define PA_BCR 0xb0e00000 #else #define PA_BCR 0xb1400000 /* FPGA */ #endif #define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ #define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ #define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ #define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ #define MRSHPC_OPTION (PA_MRSHPC + 6) #define MRSHPC_CSR (PA_MRSHPC + 8) #define MRSHPC_ISR (PA_MRSHPC + 10) #define MRSHPC_ICR (PA_MRSHPC + 12) #define MRSHPC_CPWCR (PA_MRSHPC + 14) #define MRSHPC_MW0CR1 (PA_MRSHPC + 16) #define MRSHPC_MW1CR1 (PA_MRSHPC + 18) #define MRSHPC_IOWCR1 (PA_MRSHPC + 20) #define MRSHPC_MW0CR2 (PA_MRSHPC + 22) #define MRSHPC_MW1CR2 (PA_MRSHPC + 24) #define MRSHPC_IOWCR2 (PA_MRSHPC + 26) #define MRSHPC_CDCR (PA_MRSHPC + 28) #define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) #define BCR_ILCRA (PA_BCR + 0) #define BCR_ILCRB (PA_BCR + 2) #define BCR_ILCRC (PA_BCR + 4) #define BCR_ILCRD (PA_BCR + 6) #define BCR_ILCRE (PA_BCR + 8) #define BCR_ILCRF (PA_BCR + 10) #define BCR_ILCRG (PA_BCR + 12) #if defined(CONFIG_CPU_SUBTYPE_SH7709) #define INTC_IRR0 0xa4000004UL #define INTC_IRR1 0xa4000006UL #define INTC_IRR2 0xa4000008UL #define INTC_ICR0 0xfffffee0UL #define INTC_ICR1 0xa4000010UL #define INTC_ICR2 0xa4000012UL #define INTC_INTER 0xa4000014UL #define INTC_IPRC 0xa4000016UL #define INTC_IPRD 0xa4000018UL #define INTC_IPRE 0xa400001aUL #define IRQ0_IRQ evt2irq(0x600) #define IRQ1_IRQ evt2irq(0x620) #endif #if defined(CONFIG_CPU_SUBTYPE_SH7705) #define IRQ_STNIC evt2irq(0x380) #define IRQ_CFCARD evt2irq(0x3c0) #else #define IRQ_STNIC evt2irq(0x340) #define IRQ_CFCARD evt2irq(0x2e0) #endif /* SH Ether support (SH7710/SH7712) */ /* Base address */ #define SH_ETH0_BASE 0xA7000000 #define SH_ETH1_BASE 0xA7000400 #define SH_TSU_BASE 0xA7000800 /* PHY ID */ #if defined(CONFIG_CPU_SUBTYPE_SH7710) # define PHY_ID 0x00 #elif defined(CONFIG_CPU_SUBTYPE_SH7712) # define PHY_ID 0x01 #endif /* Ether IRQ */ #define SH_ETH0_IRQ evt2irq(0xc00) #define SH_ETH1_IRQ evt2irq(0xc20) #define SH_TSU_IRQ evt2irq(0xc40) void init_se_IRQ(void); #define __IO_PREFIX se #include <asm/io_generic.h> #endif /* __ASM_SH_HITACHI_SE_H */