# SPDX-License-Identifier: GPL-2.0 if MIPS_GENERIC_KERNEL config LEGACY_BOARDS bool help Select this from your board if the board must use a legacy, non-UHI, boot protocol. This will cause the kernel to scan through the list of supported machines calling their detect functions in turn if the kernel is booted without being provided with an FDT via the UHI boot protocol. config YAMON_DT_SHIM bool help Select this from your board if the board uses the YAMON bootloader and you wish to include code which helps translate various YAMON-provided environment variables into a device tree properties. comment "Legacy (non-UHI/non-FIT) Boards" config LEGACY_BOARD_SEAD3 bool "Support MIPS SEAD-3 boards" select LEGACY_BOARDS select YAMON_DT_SHIM help Enable this to include support for booting on MIPS SEAD-3 FPGA-based development boards, which boot using a legacy boot protocol. comment "MSCC Ocelot doesn't work with SEAD3 enabled" depends on LEGACY_BOARD_SEAD3 config LEGACY_BOARD_OCELOT bool "Legacy support for Ocelot based boards" depends on LEGACY_BOARD_SEAD3=n select LEGACY_BOARDS select SOC_VCOREIII select SYS_HAS_EARLY_PRINTK select USE_GENERIC_EARLY_PRINTK_8250 config SOC_VCOREIII bool select GPIOLIB select MSCC_OCELOT_IRQ select MSCC_OCELOT #will be removed when driver no more use it #Will be removed when the driver using it will be converted to SOC_VCOREIII config MSCC_OCELOT bool comment "FIT/UHI Boards" config FIT_IMAGE_FDT_BOSTON bool "Include FDT for MIPS Boston boards" help Enable this to include the FDT for the MIPS Boston development board from Imagination Technologies in the FIT kernel image. You should enable this if you wish to boot on a MIPS Boston board, as it is expected by the bootloader. config FIT_IMAGE_FDT_MARDUK bool "Include FDT for IMG Pistachio Marduk (CI40) boards" help Enable this to include the FDT for the IMG Pistachio Marduk (CI40) from Imagination Technologies in the FIT kernel image. config FIT_IMAGE_FDT_NI169445 bool "Include FDT for NI 169445" help Enable this to include the FDT for the 169445 platform from National Instruments in the FIT kernel image. config FIT_IMAGE_FDT_XILFPGA bool "Include FDT for Xilfpga" help Enable this to include the FDT for the MIPSfpga platform from Imagination Technologies in the FIT kernel image. config FIT_IMAGE_FDT_OCELOT bool "Include FDT for Microsemi Ocelot development platforms" select SOC_VCOREIII help Enable this to include the FDT for the Ocelot development platforms from Microsemi in the FIT kernel image. This requires u-boot on the platform. config FIT_IMAGE_FDT_LUTON bool "Include FDT for Microsemi Luton development platforms" select SOC_VCOREIII help Enable this to include the FDT for the Luton development platforms from Microsemi in the FIT kernel image. This requires u-boot on the platform. config FIT_IMAGE_FDT_JAGUAR2 bool "Include FDT for Microsemi Jaguar2 development platforms" select SOC_VCOREIII help Enable this to include the FDT for the Jaguar2 development platforms from Microsemi in the FIT kernel image. This requires u-boot on the platform. config FIT_IMAGE_FDT_SERVAL bool "Include FDT for Microsemi Serval development platforms" select SOC_VCOREIII help Enable this to include the FDT for the Serval development platforms from Microsemi in the FIT kernel image. This requires u-boot on the platform. config BOARD_INGENIC bool "Support boards based on Ingenic SoCs" select MACH_INGENIC_GENERIC help Enable support for boards based on Ingenic SoCs. config VIRT_BOARD_RANCHU bool "Support Ranchu platform for Android emulator" help This enables support for the platform used by Android emulator. Ranchu platform consists of a set of virtual devices. This platform enables emulation of variety of virtual configurations while using Android emulator. Android emulator is based on Qemu, and contains the support for the same set of virtual devices. endif