// SPDX-License-Identifier: GPL-2.0-or-later /* * Device tree source for the Emerson/Artesyn MVME7100 * * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A. * * Author: Alessio Igor Bogani <alessio.bogani@elettra.eu> */ /include/ "mpc8641si-pre.dtsi" / { model = "MVME7100"; compatible = "artesyn,MVME7100"; memory { device_type = "memory"; reg = <0x00000000 0x80000000>; }; soc: soc@f1000000 { ranges = <0x00000000 0xf1000000 0x00100000>; i2c@3000 { hwmon@4c { compatible = "dallas,max6649"; reg = <0x4c>; }; rtc@68 { status = "disabled"; }; }; enet0: ethernet@24000 { phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; }; mdio@24520 { phy0: ethernet-phy@1 { reg = <1>; }; phy1: ethernet-phy@2 { reg = <2>; }; phy2: ethernet-phy@3 { reg = <3>; }; phy3: ethernet-phy@4 { reg = <4>; }; }; enet1: ethernet@25000 { phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; }; mdio@25520 { status = "disabled"; }; enet2: ethernet@26000 { phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; }; mdio@26520 { status = "disabled"; }; enet3: ethernet@27000 { phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; }; mdio@27520 { status = "disabled"; }; serial1: serial@4600 { status = "disabled"; }; }; lbc: localbus@f1005000 { reg = <0xf1005000 0x1000>; ranges = <0 0 0xf8000000 0x08000000 // NOR Flash (128MB) 2 0 0xf2030000 0x00010000 // NAND Flash (8GB) 3 0 0xf2400000 0x00080000 // MRAM (512KB) 4 0 0xf2000000 0x00010000 // BCSR 5 0 0xf2010000 0x00010000>; // QUART bcsr@4,0 { compatible = "artesyn,mvme7100-bcsr"; reg = <4 0 0x10000>; }; serial@5,1000 { device_type = "serial"; compatible = "ns16550"; reg = <5 0x1000 0x100>; clock-frequency = <1843200>; interrupts = <11 1 0 0>; }; serial@5,2000 { device_type = "serial"; compatible = "ns16550"; reg = <5 0x2000 0x100>; clock-frequency = <1843200>; interrupts = <11 1 0 0>; }; serial@5,3000 { device_type = "serial"; compatible = "ns16550"; reg = <5 0x3000 0x100>; clock-frequency = <1843200>; interrupts = <11 1 0 0>; }; serial@5,4000 { device_type = "serial"; compatible = "ns16550"; reg = <5 0x4000 0x100>; clock-frequency = <1843200>; interrupts = <11 1 0 0>; }; }; pci0: pcie@f1008000 { status = "disabled"; }; pci1: pcie@f1009000 { status = "disabled"; }; chosen { stdout-path = &serial0; }; }; /include/ "mpc8641si-post.dtsi"