# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/wireless/ti,wl1251.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments WL1251 Wireless LAN Controller
maintainers:
- Eduard Bostina <egbostina@gmail.com>
properties:
compatible:
const: ti,wl1251
reg:
maxItems: 1
interrupts:
maxItems: 1
vio-supply:
description:
Phandle to the regulator providing VIO. Required when connected via SPI.
ti,power-gpio:
maxItems: 1
description:
GPIO connected to chip's PMEN pin if operated in SPI mode.
ti,wl1251-has-eeprom:
type: boolean
description:
The wl1251 has an EEPROM connected, which provides configuration
data (calibration, MAC, ...).
clocks:
maxItems: 1
spi-max-frequency: true
spi-cpol: true
spi-cpha: true
required:
- compatible
- reg
- interrupts
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
wifi@0 {
compatible = "ti,wl1251";
reg = <0>;
spi-max-frequency = <48000000>;
spi-cpol;
spi-cpha;
interrupt-parent = <&gpio2>;
interrupts = <10 IRQ_TYPE_NONE>;
vio-supply = <&vio>;
ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
};
- |
#include <dt-bindings/interrupt-controller/irq.h>
mmc {
#address-cells = <1>;
#size-cells = <0>;
wifi@1 {
compatible = "ti,wl1251";
reg = <1>;
interrupt-parent = <&gpio1>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
ti,wl1251-has-eeprom;
};
};