// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/usb/pd.h>
#include "rk3588s.dtsi"

/ {
	model = "Radxa E54C";
	compatible = "radxa,e54c", "rockchip,rk3582", "rockchip,rk3588s";

	aliases {
		ethernet0 = &gmac1;
		mmc0 = &sdhci;
		mmc1 = &sdmmc;
	};

	chosen {
		stdout-path = "serial2:1500000n8";
	};

	hdmi0-con {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi0_con_in: endpoint {
				remote-endpoint = <&hdmi0_out_con>;
			};
		};
	};

	keys-0 {
		compatible = "adc-keys";
		io-channels = <&saradc 0>;
		io-channel-names = "buttons";
		keyup-threshold-microvolt = <1800000>;
		poll-interval = <100>;

		button-0 {
			label = "Maskrom";
			linux,code = <KEY_VENDOR>;
			press-threshold-microvolt = <0>;
		};
	};

	keys-1 {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&user_key>;

		button-1 {
			label = "User";
			linux,code = <BTN_0>;
			gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
			wakeup-source;
		};
	};

	leds {
		compatible = "gpio-leds";

		led-0 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_STATUS;
			gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "heartbeat";
			pinctrl-names = "default";
			pinctrl-0 = <&sys_led>;
		};

		led-1 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_LAN;
			function-enumerator = <1>;
			gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "netdev";
			pinctrl-names = "default";
			pinctrl-0 = <&lan1_led>;
		};

		led-2 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_LAN;
			function-enumerator = <2>;
			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "netdev";
			pinctrl-names = "default";
			pinctrl-0 = <&lan2_led>;
		};

		led-3 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_LAN;
			function-enumerator = <3>;
			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "netdev";
			pinctrl-names = "default";
			pinctrl-0 = <&lan3_led>;
		};

		led-4 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_WAN;
			gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "netdev";
			pinctrl-names = "default";
			pinctrl-0 = <&wan_led>;
		};
	};

	dc_12v: regulator-12v-dc {
		compatible = "regulator-fixed";
		regulator-name = "dc_12v";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
	};

	vcc_1v1_nldo_s3: regulator-1v1-vcc-nldo-s3 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_1v1_nldo_s3";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <1100000>;
		regulator-max-microvolt = <1100000>;
		vin-supply = <&vcc_sysin>;
	};

	vcc3v3_pcie: regulator-3v3-pcie {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_pcie";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc_sysin>;
	};

	vcc_3v3_s0: regulator-3v3-vcc-s0 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_3v3_s0";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc_3v3_s3>;
	};

	vcc5v_usb3: regulator-5v0-usb3 {
		compatible = "regulator-fixed";
		enable-active-high;
		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&usb_otg_pwren_h>;
		regulator-name = "vcc5v_usb3";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc_sysin>;
	};

	vcc5v_usb_hub: regulator-5v0-usb-hub {
		compatible = "regulator-fixed";
		enable-active-high;
		gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&usb_host_pwren_h>;
		regulator-name = "vcc5v_usb_hub";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc_sysin>;
	};

	vbus_typec0: regulator-5v0-vbus-typec0 {
		compatible = "regulator-fixed";
		enable-active-high;
		gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&typec5v_pwren_h>;
		regulator-name = "vbus_typec0";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc_sysin>;
	};

	vcc_sysin: vcca: regulator-5v0-vcc-sysin {
		compatible = "regulator-fixed";
		regulator-name = "vcc_sysin";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&typec_vin>;
	};

	vcc_5v0: regulator-5v0-vcc {
		compatible = "regulator-fixed";
		regulator-name = "vcc_5v0";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc_sysin>;
	};

	avddh_3v3: regulator-avdd-3v3 {
		compatible = "regulator-fixed";
		enable-active-high;
		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&rtl8367_en>;
		regulator-name = "avddh_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <10000>;
		vin-supply = <&vcc_5v0>;
	};

	typec_vin: regulator-typec-vin {
		compatible = "regulator-fixed";
		regulator-name = "typec_vin";
		regulator-always-on;
		regulator-boot-on;
		vin-supply = <&dc_12v>;
	};
};

&combphy0_ps {
	status = "okay";
};

&combphy2_psu {
	status = "okay";
};

/*
 * In the Rockchip RK3582 SoC, some CPU cores end up disabled
 * and unused because they're marked in the efuses as defective.
 * The disabling in the DT is performed by the boot loader.
 */
&cpu_b0 {
	cpu-supply = <&vdd_cpu_big0_s0>;
};

&cpu_b1 {
	cpu-supply = <&vdd_cpu_big0_s0>;
};

&cpu_b2 {
	cpu-supply = <&vdd_cpu_big1_s0>;
};

&cpu_b3 {
	cpu-supply = <&vdd_cpu_big1_s0>;
};

&cpu_l0 {
	cpu-supply = <&vdd_cpu_lit_s0>;
};

&cpu_l1 {
	cpu-supply = <&vdd_cpu_lit_s0>;
};

&cpu_l2 {
	cpu-supply = <&vdd_cpu_lit_s0>;
};

&cpu_l3 {
	cpu-supply = <&vdd_cpu_lit_s0>;
};

&gmac1 {
	clock_in_out = "output";
	phy-mode = "rgmii-id";
	phy-supply = <&avddh_3v3>;
	pinctrl-names = "default";
	pinctrl-0 = <&gmac1_miim
		     &gmac1_tx_bus2
		     &gmac1_rx_bus2
		     &gmac1_rgmii_clk
		     &gmac1_rgmii_bus>;
	/delete-property/ snps,tso;
	status = "okay";

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&hdmi0 {
	frl-enable-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>;
	pinctrl-names = "default";
	pinctrl-0 = <&hdmim0_tx0_cec
		     &hdmim1_tx0_hpd
		     &hdmim0_tx0_scl
		     &hdmim0_tx0_sda
		     &hdmi0_tx_on_h>;
	status = "okay";
};

&hdmi0_in {
	hdmi0_in_vp0: endpoint {
		remote-endpoint = <&vp0_out_hdmi0>;
	};
};

&hdmi0_out {
	hdmi0_out_con: endpoint {
		remote-endpoint = <&hdmi0_con_in>;
	};
};

&hdmi0_sound {
	status = "okay";
};

&hdptxphy0 {
	status = "okay";
};

&i2c0 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0m2_xfer>;
	status = "okay";

	vdd_cpu_big0_s0: regulator@42 {
		compatible = "rockchip,rk8602";
		reg = <0x42>;
		fcs,suspend-voltage-selector = <1>;
		regulator-name = "vdd_cpu_big0_s0";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <550000>;
		regulator-max-microvolt = <1050000>;
		regulator-ramp-delay = <2300>;
		vin-supply = <&vcc_sysin>;

		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};

	vdd_cpu_big1_s0: regulator@43 {
		compatible = "rockchip,rk8603", "rockchip,rk8602";
		reg = <0x43>;
		fcs,suspend-voltage-selector = <1>;
		regulator-name = "vdd_cpu_big1_s0";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <550000>;
		regulator-max-microvolt = <1050000>;
		regulator-ramp-delay = <2300>;
		vin-supply = <&vcc_sysin>;

		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};

	eeprom@50 {
		compatible = "belling,bl24c16a", "atmel,24c16";
		reg = <0x50>;
		pagesize = <16>;
		read-only;
		vcc-supply = <&vcc_3v3_s3>;

		nvmem-layout {
			compatible = "fixed-layout";
			#address-cells = <1>;
			#size-cells = <1>;

			eth_mac0: macaddr@9e {
				reg = <0x9e 0x06>;
			};

			eth_mac1: macaddr@a4 {
				reg = <0xa4 0x06>;
			};

			eth_mac2: macaddr@aa {
				reg = <0xaa 0x06>;
			};

			eth_mac3: macaddr@b0 {
				reg = <0xb0 0x06>;
			};
		};
	};
};

&i2c2 {
	status = "okay";

	vdd_npu_s0: regulator@42 {
		compatible = "rockchip,rk8602";
		reg = <0x42>;
		fcs,suspend-voltage-selector = <1>;
		regulator-name = "vdd_npu_s0";
		regulator-min-microvolt = <550000>;
		regulator-max-microvolt = <950000>;
		regulator-ramp-delay = <2300>;
		vin-supply = <&vcc_sysin>;

		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};
};

&i2c4 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c4m2_xfer>;
	status = "okay";

	usbc0: usb-typec@22 {
		compatible = "fcs,fusb302";
		reg = <0x22>;
		interrupt-parent = <&gpio1>;
		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&cc_int_l>;
		vbus-supply = <&vbus_typec0>;

		usb_con: connector {
			compatible = "usb-c-connector";
			label = "USB-C";
			data-role = "dual";
			op-sink-microwatt = <1000000>;
			power-role = "dual";
			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>;
			sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
			try-power-role = "sink";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					usbc0_hs: endpoint {
						remote-endpoint = <&usb_host0_xhci_drd_sw>;
					};
				};

				port@1 {
					reg = <1>;
					usbc0_ss: endpoint {
						remote-endpoint = <&usbdp_phy0_typec_ss>;
					};
				};

				port@2 {
					reg = <2>;
					usbc0_sbu: endpoint {
						remote-endpoint = <&usbdp_phy0_typec_sbu>;
					};
				};
			};
		};
	};

	hym8563: rtc@51 {
		compatible = "haoyu,hym8563";
		reg = <0x51>;
		#clock-cells = <0>;
		clock-output-names = "rtcic_32kout";
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&rtc_int_l>;
		wakeup-source;
	};
};

&i2s5_8ch {
	status = "okay";
};

&mdio1 {
	ethernet-switch@29 {
		compatible = "realtek,rtl8365mb";
		reg = <29>;
		pinctrl-names = "default";
		pinctrl-0 = <&gmac1_rstn_l>;
		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;

		switch_intc: interrupt-controller {
			interrupt-parent = <&gpio3>;
			interrupts = <RK_PB6 IRQ_TYPE_LEVEL_LOW>;
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <1>;
		};

		mdio {
			#address-cells = <1>;
			#size-cells = <0>;

			phy0: ethernet-phy@0 {
				reg = <0>;
				interrupt-parent = <&switch_intc>;
				interrupts = <0>;
			};

			phy1: ethernet-phy@1 {
				reg = <1>;
				interrupt-parent = <&switch_intc>;
				interrupts = <1>;
			};

			phy2: ethernet-phy@2 {
				reg = <2>;
				interrupt-parent = <&switch_intc>;
				interrupts = <2>;
			};

			phy3: ethernet-phy@3 {
				reg = <3>;
				interrupt-parent = <&switch_intc>;
				interrupts = <3>;
			};

			phy4: ethernet-phy@4 {
				reg = <4>;
				interrupt-parent = <&switch_intc>;
				interrupts = <4>;
			};
		};

		ethernet-ports {
			#address-cells = <1>;
			#size-cells = <0>;

			ethernet-port@0 {
				reg = <0>;
				label = "lan3";
				nvmem-cells = <&eth_mac3>;
				nvmem-cell-names = "mac-address";
				phy-handle = <&phy0>;
			};

			ethernet-port@1 {
				reg = <1>;
				label = "lan2";
				nvmem-cells = <&eth_mac2>;
				nvmem-cell-names = "mac-address";
				phy-handle = <&phy1>;
			};

			ethernet-port@2 {
				reg = <2>;
				label = "lan1";
				nvmem-cells = <&eth_mac1>;
				nvmem-cell-names = "mac-address";
				phy-handle = <&phy2>;
			};

			ethernet-port@3 {
				reg = <3>;
				label = "wan";
				nvmem-cells = <&eth_mac0>;
				nvmem-cell-names = "mac-address";
				phy-handle = <&phy3>;
			};

			ethernet-port@6 {
				reg = <6>;
				ethernet = <&gmac1>;
				phy-mode = "rgmii";
				rx-internal-delay-ps = <2000>;
				tx-internal-delay-ps = <2000>;

				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};
		};
	};
};

&pcie2x1l2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pcie20x1_2_perstn_m0>;
	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie>;
	status = "okay";
};

&pd_npu {
	domain-supply = <&vdd_npu_s0>;
};

&pinctrl {
	ethernet {
		gmac1_rstn_l: gmac1-rstn-l {
			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		rtl8367_en: rtl8367-en {
			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	hdmi {
		hdmi0_tx_on_h: hdmi0-tx-on-h {
			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	keys {
		user_key: user-key {
			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	leds {
		lan1_led: lan1-led {
			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		lan2_led: lan2-led {
			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		lan3_led: lan3-led {
			rockchip,pins = <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		sys_led: sys-led {
			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		wan_led: wan-led {
			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	pcie {
		pcie20x1_2_perstn_m0: pcie-perstn {
			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	rtc {
		rtc_int_l: rtc-int-l {
			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	typec {
		cc_int_l: cc-int-l {
			rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		typec5v_pwren_h: typec5v-pwren-h {
			rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	usb {
		usb_host_pwren_h: usb-host-pwren-h {
			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		usb_otg_pwren_h: usb-otg-pwren-h {
			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&pwm3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm3m1_pins>;
	status = "okay";
};

&rknn_core_0 {
	npu-supply = <&vdd_npu_s0>;
	sram-supply = <&vdd_npu_s0>;
	status = "okay";
};

&rknn_core_1 {
	npu-supply = <&vdd_npu_s0>;
	sram-supply = <&vdd_npu_s0>;
	status = "okay";
};

&rknn_core_2 {
	npu-supply = <&vdd_npu_s0>;
	sram-supply = <&vdd_npu_s0>;
	status = "okay";
};

&rknn_mmu_0 {
	status = "okay";
};

&rknn_mmu_1 {
	status = "okay";
};

&rknn_mmu_2 {
	status = "okay";
};

&saradc {
	vref-supply = <&vcca_1v8_s0>;
	status = "okay";
};

/* Conflict with SFC */
&sdhci {
	bus-width = <8>;
	cap-mmc-highspeed;
	mmc-hs400-1_8v;
	mmc-hs400-enhanced-strobe;
	non-removable;
	vmmc-supply = <&vcc_3v3_s0>;
	vqmmc-supply = <&vcc_1v8_s3>;
	status = "disabled";
};

&sdmmc {
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
	disable-wp;
	sd-uhs-sdr104;
	vmmc-supply = <&vcc_3v3_s3>;
	vqmmc-supply = <&vccio_sd_s0>;
	status = "okay";
};

&sfc {
	pinctrl-names = "default";
	pinctrl-0 = <&fspim0_pins>;
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <104000000>;
		spi-rx-bus-width = <4>;
		spi-tx-bus-width = <1>;
		vcc-supply = <&vcc_1v8_s3>;
	};
};

&spi2 {
	assigned-clocks = <&cru CLK_SPI2>;
	assigned-clock-rates = <200000000>;
	num-cs = <1>;
	pinctrl-names = "default";
	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
	status = "okay";

	pmic@0 {
		compatible = "rockchip,rk806";
		reg = <0>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-parent = <&gpio0>;
		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
		spi-max-frequency = <1000000>;
		system-power-controller;

		vcc1-supply = <&vcc_sysin>;
		vcc2-supply = <&vcc_sysin>;
		vcc3-supply = <&vcc_sysin>;
		vcc4-supply = <&vcc_sysin>;
		vcc5-supply = <&vcc_sysin>;
		vcc6-supply = <&vcc_sysin>;
		vcc7-supply = <&vcc_sysin>;
		vcc8-supply = <&vcc_sysin>;
		vcc9-supply = <&vcc_sysin>;
		vcc10-supply = <&vcc_sysin>;
		vcc11-supply = <&vcc_2v0_pldo_s3>;
		vcc12-supply = <&vcc_sysin>;
		vcc13-supply = <&vcc_1v1_nldo_s3>;
		vcc14-supply = <&vcc_1v1_nldo_s3>;
		vcca-supply = <&vcca>;

		rk806_dvs1_null: dvs1-null-pins {
			pins = "gpio_pwrctrl1";
			function = "pin_fun0";
		};

		rk806_dvs2_null: dvs2-null-pins {
			pins = "gpio_pwrctrl2";
			function = "pin_fun0";
		};

		rk806_dvs3_null: dvs3-null-pins {
			pins = "gpio_pwrctrl3";
			function = "pin_fun0";
		};

		regulators {
			vdd_gpu_s0: dcdc-reg1 {
				regulator-name = "vdd_gpu_s0";
				regulator-boot-on;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <950000>;
				regulator-ramp-delay = <12500>;
				regulator-enable-ramp-delay = <400>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_cpu_lit_s0: dcdc-reg2 {
				regulator-name = "vdd_cpu_lit_s0";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <950000>;
				regulator-ramp-delay = <12500>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_logic_s0: dcdc-reg3 {
				regulator-name = "vdd_logic_s0";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <675000>;
				regulator-max-microvolt = <750000>;
				regulator-ramp-delay = <12500>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdd_vdenc_s0: dcdc-reg4 {
				regulator-name = "vdd_vdenc_s0";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <550000>;
				regulator-max-microvolt = <950000>;
				regulator-ramp-delay = <12500>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_ddr_s0: dcdc-reg5 {
				regulator-name = "vdd_ddr_s0";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <675000>;
				regulator-max-microvolt = <900000>;
				regulator-ramp-delay = <12500>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd2_ddr_s3: dcdc-reg6 {
				regulator-name = "vdd2_ddr_s3";
				regulator-always-on;
				regulator-boot-on;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vcc_2v0_pldo_s3: dcdc-reg7 {
				regulator-name = "vcc_2v0_pldo_s3";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <2000000>;
				regulator-max-microvolt = <2000000>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vcc_3v3_s3: dcdc-reg8 {
				regulator-name = "vcc_3v3_s3";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vddq_ddr_s0: dcdc-reg9 {
				regulator-name = "vddq_ddr_s0";
				regulator-always-on;
				regulator-boot-on;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_1v8_s3: dcdc-reg10 {
				regulator-name = "vcc_1v8_s3";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vcc_1v8_s0: pldo-reg1 {
				regulator-name = "vcc_1v8_s0";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vcca_1v8_s0: pldo-reg2 {
				regulator-name = "vcca_1v8_s0";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdda_1v2_s0: pldo-reg3 {
				regulator-name = "vdda_1v2_s0";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1200000>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcca_3v3_s0: pldo-reg4 {
				regulator-name = "vcca_3v3_s0";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vccio_sd_s0: pldo-reg5 {
				regulator-name = "vccio_sd_s0";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			pldo6_s3: pldo-reg6 {
				regulator-name = "pldo6_s3";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdd_0v75_s3: nldo-reg1 {
				regulator-name = "vdd_0v75_s3";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <750000>;
				regulator-max-microvolt = <750000>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdda_ddr_pll_s0: nldo-reg2 {
				regulator-name = "vdda_ddr_pll_s0";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <850000>;
				regulator-max-microvolt = <850000>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdda_0v75_s0: nldo-reg3 {
				regulator-name = "vdda_0v75_s0";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <750000>;
				regulator-max-microvolt = <750000>;

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdda_0v85_s0: nldo-reg4 {
				regulator-name = "vdda_0v85_s0";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <850000>;
				regulator-max-microvolt = <850000>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_0v75_s0: nldo-reg5 {
				regulator-name = "vdd_0v75_s0";
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <750000>;
				regulator-max-microvolt = <750000>;

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};
		};
	};
};

&tsadc {
	status = "okay";
};

&u2phy0 {
	status = "okay";
};

&u2phy0_otg {
	status = "okay";
};

&u2phy2 {
	status = "okay";
};

&u2phy2_host {
	phy-supply = <&vcc5v_usb_hub>;
	status = "okay";
};

&u2phy3 {
	status = "okay";
};

&u2phy3_host {
	phy-supply = <&vcc5v_usb3>;
	status = "okay";
};

&uart2 {
	pinctrl-0 = <&uart2m0_xfer>;
	status = "okay";
};

&usbdp_phy0 {
	mode-switch;
	orientation-switch;
	sbu1-dc-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
	sbu2-dc-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
	status = "okay";

	port {
		#address-cells = <1>;
		#size-cells = <0>;

		usbdp_phy0_typec_ss: endpoint@0 {
			reg = <0>;
			remote-endpoint = <&usbc0_ss>;
		};

		usbdp_phy0_typec_sbu: endpoint@1 {
			reg = <1>;
			remote-endpoint = <&usbc0_sbu>;
		};
	};
};

&usb_host0_ehci {
	status = "okay";
};

&usb_host0_xhci {
	usb-role-switch;
	status = "okay";

	port {
		#address-cells = <1>;
		#size-cells = <0>;

		usb_host0_xhci_drd_sw: endpoint@0 {
			reg = <0>;
			remote-endpoint = <&usbc0_hs>;
		};
	};
};

&usb_host1_ehci {
	status = "okay";
};

&usb_host1_ohci {
	status = "okay";
};

&usb_host2_xhci {
	status = "okay";
};

&vop_mmu {
	status = "okay";
};

&vop {
	status = "okay";
};

&vp0 {
	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
		remote-endpoint = <&hdmi0_in_vp0>;
	};
};