# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/ovti,og0ve1b.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: OmniVision OG0VA1B and OG0VE1B Image Sensors
description:
OmniVision OG0VA1B and OG0VE1B are low power consuming monochrome image
sensors. The sensors are controlled over a serial camera control bus
protocol (SCCB), the widest supported image size is 640x480, data output
format is 8/10-bit RAW transferred over one-lane MIPI D-PHY.
maintainers:
- Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
allOf:
- $ref: /schemas/media/video-interface-devices.yaml#
properties:
compatible:
enum:
- ovti,og0va1b
- ovti,og0ve1b
reg:
maxItems: 1
clocks:
description: XVCLK supply clock, 6MHz to 27MHz frequency.
maxItems: 1
reset-gpios:
description: Active low GPIO connected to XSHUTDOWN pad of the sensor.
maxItems: 1
strobe-gpios:
description: Input GPIO connected to strobe pad of the sensor.
maxItems: 1
avdd-supply:
description: Analog voltage supply, 2.6 to 3.0 volts.
dovdd-supply:
description: Digital I/O voltage supply, 1.7 to 3.0 volts.
dvdd-supply:
description: Digital core voltage supply.
port:
$ref: /schemas/graph.yaml#/$defs/port-base
additionalProperties: false
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
required:
- link-frequencies
required:
- compatible
- reg
- port
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
camera@3e {
compatible = "ovti,og0ve1b";
reg = <0x3e>;
clocks = <&camera_clk 0>;
assigned-clocks = <&camera_clk 0>;
assigned-clock-rates = <24000000>;
reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
avdd-supply = <&vreg_2p8>;
dovdd-supply = <&vreg_1p8>;
dvdd-supply = <&vreg_1p2>;
port {
endpoint {
link-frequencies = /bits/ 64 <500000000>;
remote-endpoint = <&mipi_csi2_ep>;
};
};
};
};
...