// SPDX-License-Identifier: GPL-2.0 /dts-v1/; #include "tegra20-tamonten.dtsi" / { model = "Avionic Design Medcom-Wide board"; compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20"; aliases { serial0 = &uartd; }; chosen { stdout-path = "serial0:115200n8"; }; host1x@50000000 { dc@54200000 { rgb { status = "okay"; nvidia,panel = <&panel>; }; }; }; pwm@7000a000 { status = "okay"; }; i2c@7000c000 { wm8903: wm8903@1a { compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; micdet-cfg = <0>; micdet-delay = <100>; gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; }; }; backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; /* close enough */ power-supply = <&vdd_3v3_reg>; }; panel: panel { compatible = "innolux,n156bge-l21"; power-supply = <&vdd_1v8_reg>; // <&vdd_3v3_reg>; enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; backlight = <&backlight>; }; sound { compatible = "ad,tegra-audio-wm8903-medcom-wide", "nvidia,tegra-audio-wm8903"; nvidia,model = "Avionic Design Medcom-Wide"; nvidia,audio-routing = "Headphone Jack", "HPOUTR", "Headphone Jack", "HPOUTL", "Int Spk", "ROP", "Int Spk", "RON", "Int Spk", "LOP", "Int Spk", "LON", "Mic Jack", "MICBIAS", "IN1L", "Mic Jack"; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; vcc_24v_reg: regulator-24v0 { compatible = "regulator-fixed"; regulator-name = "vcc_24v"; regulator-min-microvolt = <24000000>; regulator-max-microvolt = <24000000>; regulator-always-on; }; vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; vin-supply = <&vcc_24v_reg>; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; vdd_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; vin-supply = <&vcc_24v_reg>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vdd_1v8_reg: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "vdd_1v8"; vin-supply = <&vdd_3v3_reg>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; };