Directory Files
.. 107
File Size
Kconfig 1.3 kB
Makefile 340 B
ingenic_ecc.c 4.0 kB
ingenic_ecc.h 2.1 kB
ingenic_nand.mod.c 0 B
ingenic_nand_drv.c 15 kB
jz4725b_bch.c 7.3 kB
jz4725b_bch.mod.c 0 B
jz4740_ecc.c 5.1 kB
jz4740_ecc.mod.c 0 B
jz4780_bch.c 6.8 kB
jz4780_bch.mod.c 0 B

Linux v6.6.1 - ingenic

# SPDX-License-Identifier: GPL-2.0-only
config MTD_NAND_JZ4780
	tristate "JZ4780 NAND controller"
	depends on MIPS || COMPILE_TEST
	depends on JZ4780_NEMC
	help
	  Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
	  based boards, using the BCH controller for hardware error correction.

if MTD_NAND_JZ4780

config MTD_NAND_INGENIC_ECC
	bool

config MTD_NAND_JZ4740_ECC
	tristate "Hardware BCH support for JZ4740 SoC"
	select MTD_NAND_INGENIC_ECC
	help
	  Enable this driver to support the Reed-Solomon error-correction
	  hardware present on the JZ4740 SoC from Ingenic.

	  This driver can also be built as a module. If so, the module
	  will be called jz4740-ecc.

config MTD_NAND_JZ4725B_BCH
	tristate "Hardware BCH support for JZ4725B SoC"
	select MTD_NAND_INGENIC_ECC
	help
	  Enable this driver to support the BCH error-correction hardware
	  present on the JZ4725B SoC from Ingenic.

	  This driver can also be built as a module. If so, the module
	  will be called jz4725b-bch.

config MTD_NAND_JZ4780_BCH
	tristate "Hardware BCH support for JZ4780 SoC"
	select MTD_NAND_INGENIC_ECC
	help
	  Enable this driver to support the BCH error-correction hardware
	  present on the JZ4780 SoC from Ingenic.

	  This driver can also be built as a module. If so, the module
	  will be called jz4780-bch.

endif # MTD_NAND_JZ4780