# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/sound/qcom,pm8916-wcd-analog-codec.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm PM8916 WCD Analog Audio Codec maintainers: - Konrad Dybcio <konradybcio@kernel.org> description: The analog WCD audio codec found on Qualcomm PM8916 PMIC. properties: compatible: const: qcom,pm8916-wcd-analog-codec reg: maxItems: 1 interrupts: maxItems: 14 interrupt-names: items: - const: cdc_spk_cnp_int - const: cdc_spk_clip_int - const: cdc_spk_ocp_int - const: mbhc_ins_rem_det1 - const: mbhc_but_rel_det - const: mbhc_but_press_det - const: mbhc_ins_rem_det - const: mbhc_switch_int - const: cdc_ear_ocp_int - const: cdc_hphr_ocp_int - const: cdc_hphl_ocp_det - const: cdc_ear_cnp_int - const: cdc_hphr_cnp_int - const: cdc_hphl_cnp_int vdd-cdc-io-supply: description: 1.8V buck supply vdd-cdc-tx-rx-cx-supply: description: 1.8V SIDO buck supply vdd-micbias-supply: description: micbias supply qcom,mbhc-vthreshold-low: $ref: /schemas/types.yaml#/definitions/uint32-array description: Array of 5 threshold voltages in mV for 5-button detection on headset when MBHC is powered by an internal current source. minItems: 5 maxItems: 5 qcom,mbhc-vthreshold-high: $ref: /schemas/types.yaml#/definitions/uint32-array description: Array of 5 threshold voltages in mV for 5-button detection on headset when MBHC is powered from micbias. minItems: 5 maxItems: 5 qcom,micbias-lvl: $ref: /schemas/types.yaml#/definitions/uint32 description: Voltage (mV) for Mic Bias qcom,hphl-jack-type-normally-open: type: boolean description: True if the HPHL pin on the jack is NO (Normally Open), false if it's NC (Normally Closed). qcom,gnd-jack-type-normally-open: type: boolean description: True if the GND pin on the jack is NO (Normally Open), false if it's NC (Normally Closed). qcom,micbias1-ext-cap: type: boolean description: True if micbias1 has an external capacitor. qcom,micbias2-ext-cap: type: boolean description: True if micbias2 has an external capacitor. "#sound-dai-cells": const: 1 required: - compatible - reg additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> pmic@1 { compatible = "qcom,pm8916", "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; audio-codec@f000 { compatible = "qcom,pm8916-wcd-analog-codec"; reg = <0xf000>; qcom,mbhc-vthreshold-low = <75 150 237 450 500>; qcom,mbhc-vthreshold-high = <75 150 237 450 500>; interrupt-parent = <&spmi_bus>; interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, <0x1 0xf0 0x1 IRQ_TYPE_NONE>, <0x1 0xf0 0x2 IRQ_TYPE_NONE>, <0x1 0xf0 0x3 IRQ_TYPE_NONE>, <0x1 0xf0 0x4 IRQ_TYPE_NONE>, <0x1 0xf0 0x5 IRQ_TYPE_NONE>, <0x1 0xf0 0x6 IRQ_TYPE_NONE>, <0x1 0xf0 0x7 IRQ_TYPE_NONE>, <0x1 0xf1 0x0 IRQ_TYPE_NONE>, <0x1 0xf1 0x1 IRQ_TYPE_NONE>, <0x1 0xf1 0x2 IRQ_TYPE_NONE>, <0x1 0xf1 0x3 IRQ_TYPE_NONE>, <0x1 0xf1 0x4 IRQ_TYPE_NONE>, <0x1 0xf1 0x5 IRQ_TYPE_NONE>; interrupt-names = "cdc_spk_cnp_int", "cdc_spk_clip_int", "cdc_spk_ocp_int", "mbhc_ins_rem_det1", "mbhc_but_rel_det", "mbhc_but_press_det", "mbhc_ins_rem_det", "mbhc_switch_int", "cdc_ear_ocp_int", "cdc_hphr_ocp_int", "cdc_hphl_ocp_det", "cdc_ear_cnp_int", "cdc_hphr_cnp_int", "cdc_hphl_cnp_int"; vdd-cdc-io-supply = <&pm8916_l5>; vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; vdd-micbias-supply = <&pm8916_l13>; #sound-dai-cells = <1>; }; };