// SPDX-License-Identifier: GPL-2.0
#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>

/ {
	model = "Sony Xperia Z";
	compatible = "sony,xperia-yuga", "qcom,apq8064";
	chassis-type = "handset";

	aliases {
		serial0 = &gsbi5_serial;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	gpio-keys {
		compatible = "gpio-keys";

		pinctrl-names = "default";
		pinctrl-0 = <&gpio_keys_pin_a>;

		key-camera-focus {
			label = "camera_focus";
			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_CAMERA_FOCUS>;
		};

		key-camera-snapshot {
			label = "camera_snapshot";
			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_CAMERA>;
		};

		key-volume-down {
			label = "volume_down";
			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_VOLUMEDOWN>;
		};

		key-volume-up {
			label = "volume_up";
			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_VOLUMEUP>;
		};
	};
};

&gsbi5 {
	qcom,mode = <GSBI_PROT_I2C_UART>;
	status = "okay";
};

&gsbi5_serial {
	pinctrl-names = "default";
	pinctrl-0 = <&gsbi5_uart_pin_a>;
	status = "okay";
};

&pm8921_gpio {
	gpio_keys_pin_a: gpio-keys-active-state {
		pins = "gpio3", "gpio4", "gpio29", "gpio35";
		function = "normal";

		bias-pull-up;
		drive-push-pull;
		input-enable;
		power-source = <2>;
		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
		qcom,pull-up-strength = <0>;
	};
};

&riva {
	pinctrl-names = "default";
	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
	status = "okay";
};

&rpm {
	regulators {
		vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
		vin_lvs_1_3_6-supply = <&pm8921_s4>;
		vin_lvs_4_5_7-supply = <&pm8921_s4>;
		vin_ncp-supply = <&pm8921_l6>;
		vin_lvs2-supply = <&pm8921_s4>;
		vin_l24-supply = <&pm8921_s1>;
		vin_l25-supply = <&pm8921_s1>;
		vin_l27-supply = <&pm8921_s7>;
		vin_l28-supply = <&pm8921_s7>;

		/* Buck SMPS */
		s1 {
			regulator-always-on;
			regulator-min-microvolt = <1225000>;
			regulator-max-microvolt = <1225000>;
			qcom,switch-mode-frequency = <3200000>;
			bias-pull-down;
		};

		s2 {
			regulator-min-microvolt = <1300000>;
			regulator-max-microvolt = <1300000>;
			qcom,switch-mode-frequency = <1600000>;
			bias-pull-down;
		};

		s3 {
			regulator-min-microvolt = <500000>;
			regulator-max-microvolt = <1150000>;
			qcom,switch-mode-frequency = <4800000>;
			bias-pull-down;
		};

		s4 {
			regulator-always-on;
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			qcom,switch-mode-frequency = <1600000>;
			bias-pull-down;
			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
		};

		s7 {
			regulator-min-microvolt = <1300000>;
			regulator-max-microvolt = <1300000>;
			qcom,switch-mode-frequency = <3200000>;
		};

		s8 {
			regulator-min-microvolt = <2200000>;
			regulator-max-microvolt = <2200000>;
			qcom,switch-mode-frequency = <1600000>;
		};

		/* PMOS LDO */
		l1 {
			regulator-always-on;
			regulator-min-microvolt = <1100000>;
			regulator-max-microvolt = <1100000>;
			bias-pull-down;
		};

		l2 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			bias-pull-down;
		};

		l3 {
			regulator-min-microvolt = <3075000>;
			regulator-max-microvolt = <3075000>;
			bias-pull-down;
		};

		l4 {
			regulator-always-on;
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			bias-pull-down;
		};

		l5 {
			regulator-min-microvolt = <2950000>;
			regulator-max-microvolt = <2950000>;
			bias-pull-down;
		};

		l6 {
			regulator-min-microvolt = <2950000>;
			regulator-max-microvolt = <2950000>;
			bias-pull-down;
		};

		l7 {
			regulator-min-microvolt = <1850000>;
			regulator-max-microvolt = <2950000>;
			bias-pull-down;
		};

		l8 {
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2800000>;
			bias-pull-down;
		};

		l9 {
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3000000>;
			bias-pull-down;
		};

		l10 {
			regulator-min-microvolt = <2900000>;
			regulator-max-microvolt = <2900000>;
			bias-pull-down;
		};

		l11 {
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3000000>;
			bias-pull-down;
		};

		l12 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			bias-pull-down;
		};

		l14 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			bias-pull-down;
		};

		l15 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2950000>;
			bias-pull-down;
		};

		l16 {
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2800000>;
			bias-pull-down;
		};

		l17 {
			regulator-min-microvolt = <2000000>;
			regulator-max-microvolt = <2000000>;
			bias-pull-down;
		};

		l18 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			bias-pull-down;
		};

		l21 {
			regulator-min-microvolt = <1050000>;
			regulator-max-microvolt = <1050000>;
			bias-pull-down;
		};

		l22 {
			regulator-min-microvolt = <2600000>;
			regulator-max-microvolt = <2600000>;
			bias-pull-down;
		};

		l23 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			bias-pull-down;
		};

		l24 {
			regulator-min-microvolt = <750000>;
			regulator-max-microvolt = <1150000>;
			bias-pull-down;
		};

		l25 {
			regulator-always-on;
			regulator-min-microvolt = <1250000>;
			regulator-max-microvolt = <1250000>;
			bias-pull-down;
		};

		l27 {
			regulator-min-microvolt = <1100000>;
			regulator-max-microvolt = <1100000>;
		};

		l28 {
			regulator-min-microvolt = <1050000>;
			regulator-max-microvolt = <1050000>;
			bias-pull-down;
		};

		l29 {
			regulator-min-microvolt = <2000000>;
			regulator-max-microvolt = <2000000>;
			bias-pull-down;
		};

		/* Low Voltage Switch */
		lvs1 {
			bias-pull-down;
		};

		lvs2 {
			bias-pull-down;
		};

		lvs3 {
			bias-pull-down;
		};

		lvs4 {
			bias-pull-down;
		};

		lvs5 {
			bias-pull-down;
		};

		lvs6 {
			bias-pull-down;
		};

		lvs7 {
			bias-pull-down;
		};

		usb-switch {};

		hdmi-switch {};

		ncp {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			qcom,switch-mode-frequency = <1600000>;
		};
	};
};

&sdcc1 {
	vmmc-supply = <&pm8921_l5>;
	vqmmc-supply = <&pm8921_s4>;
	status = "okay";
};

&sdcc3 {
	vmmc-supply = <&pm8921_l6>;
	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;

	pinctrl-names = "default";
	pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;

	status = "okay";
};

&tlmm_pinmux {
	gsbi5_uart_pin_a: gsbi5-uart-pin-active {
		rx {
			pins = "gpio52";
			function = "gsbi5";
			drive-strength = <2>;
			bias-pull-up;
		};

		tx {
			pins = "gpio51";
			function = "gsbi5";
			drive-strength = <4>;
			bias-disable;
		};
	};


	sdcc3_cd_pin_a: sdcc3-cd-pin-active {
		pins = "gpio26";
		function = "gpio";

		drive-strength = <2>;
		bias-disable;
	};
};

&usb_hs1_phy {
	v3p3-supply = <&pm8921_l3>;
	v1p8-supply = <&pm8921_l4>;
};

&usb1 {
	dr_mode = "otg";
	status = "okay";
};