// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * Copyright (C) STMicroelectronics 2022 - All Rights Reserved * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. */ / { firmware { optee: optee { compatible = "linaro,optee-tz"; method = "smc"; }; scmi: scmi { compatible = "linaro,scmi-optee"; #address-cells = <1>; #size-cells = <0>; linaro,optee-channel-id = <0>; scmi_clk: protocol@14 { reg = <0x14>; #clock-cells = <1>; }; scmi_reset: protocol@16 { reg = <0x16>; #reset-cells = <1>; }; scmi_voltd: protocol@17 { reg = <0x17>; scmi_reguls: regulators { #address-cells = <1>; #size-cells = <0>; scmi_reg11: regulator@0 { reg = <0>; regulator-name = "reg11"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; scmi_reg18: regulator@1 { reg = <1>; regulator-name = "reg18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; scmi_usb33: regulator@2 { reg = <2>; regulator-name = "usb33"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; }; }; }; }; }; ®11 { status = "disabled"; }; ®18 { status = "disabled"; }; &usb33 { status = "disabled"; }; &usbotg_hs { usb33d-supply = <&scmi_usb33>; }; &usbphyc { vdda1v1-supply = <&scmi_reg11>; vdda1v8-supply = <&scmi_reg18>; }; /delete-node/ &clk_hse; /delete-node/ &clk_hsi; /delete-node/ &clk_lse; /delete-node/ &clk_lsi; /delete-node/ &clk_csi;