# SPDX-License-Identifier: GPL-2.0
if MMU

comment "Bus Support"

config DIO
	bool "DIO bus support"
	depends on HP300
	default y
	help
	  Say Y here to enable support for the "DIO" expansion bus used in
	  HP300 machines. If you are using such a system you almost certainly
	  want this.

config NUBUS
	bool
	depends on MAC
	default y

config ZORRO
	bool "Amiga Zorro (AutoConfig) bus support"
	depends on AMIGA
	help
	  This enables support for the Zorro bus in the Amiga. If you have
	  expansion cards in your Amiga that conform to the Amiga
	  AutoConfig(tm) specification, say Y, otherwise N. Note that even
	  expansion cards that do not fit in the Zorro slots but fit in e.g.
	  the CPU slot may fall in this category, so you have to say Y to let
	  Linux use these.

config AMIGA_PCMCIA
	bool "Amiga 1200/600 PCMCIA support"
	depends on AMIGA
	help
	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
	  600. If you intend to use pcmcia cards say Y; otherwise say N.

config ISA
	bool
	depends on Q40 || AMIGA_PCMCIA
	default y
	help
	  Find out whether you have ISA slots on your motherboard.  ISA is the
	  name of a bus system, i.e. the way the CPU talks to the other stuff
	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
	  newer boards don't support it.  If you have ISA, say Y, otherwise N.

config ATARI_ROM_ISA
	bool "Atari ROM port ISA adapter support"
	depends on ATARI
	help
	  This option enables support for the ROM port ISA adapter used to
	  operate ISA cards on Atari. Only 8  bit cards are supported, and
	  no interrupt lines are connected.
	  The only driver currently using this adapter is the EtherNEC
	  driver for RTL8019AS based NE2000 compatible network cards.

source "drivers/zorro/Kconfig"

endif