// SPDX-License-Identifier: BSD-3-Clause
/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
#include <dt-bindings/clock/qcom,gcc-msm8953.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
clocks {
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
clock-output-names = "xo";
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
};
CPU4: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x100>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_1>;
#cooling-cells = <2>;
};
CPU5: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x101>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_1>;
#cooling-cells = <2>;
};
CPU6: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x102>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_1>;
#cooling-cells = <2>;
};
CPU7: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x103>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_1>;
#cooling-cells = <2>;
};
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
};
cluster1 {
core0 {
cpu = <&CPU4>;
};
core1 {
cpu = <&CPU5>;
};
core2 {
cpu = <&CPU6>;
};
core3 {
cpu = <&CPU7>;
};
};
};
L2_0: l2-cache-0 {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
L2_1: l2-cache-1 {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
};
firmware {
scm: scm {
compatible = "qcom,scm-msm8953", "qcom,scm";
clocks = <&gcc GCC_CRYPTO_CLK>,
<&gcc GCC_CRYPTO_AXI_CLK>,
<&gcc GCC_CRYPTO_AHB_CLK>;
clock-names = "core", "bus", "iface";
#reset-cells = <1>;
};
};
memory {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
reg = <0 0 0 0>;
};
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
rpm: remoteproc {
compatible = "qcom,msm8953-rpm-proc", "qcom,rpm-proc";
smd-edge {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8953";
qcom,smd-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc";
clocks = <&xo_board>;
clock-names = "xo";
#clock-cells = <1>;
};
rpmpd: power-controller {
compatible = "qcom,msm8953-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_ret: opp1 {
opp-level = <RPM_SMD_LEVEL_RETENTION>;
};
rpmpd_opp_ret_plus: opp2 {
opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
};
rpmpd_opp_min_svs: opp3 {
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp4 {
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp5 {
opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp6 {
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp7 {
opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp8 {
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp9 {
opp-level = <RPM_SMD_LEVEL_TURBO>;
};
};
};
};
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
zap_shader_region: zap@81800000 {
compatible = "shared-dma-pool";
reg = <0x0 0x81800000 0x0 0x2000>;
no-map;
};
qseecom_mem: qseecom@85b00000 {
reg = <0x0 0x85b00000 0x0 0x800000>;
no-map;
};
smem_mem: smem@86300000 {
compatible = "qcom,smem";
reg = <0x0 0x86300000 0x0 0x100000>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
hwlocks = <&tcsr_mutex 3>;
no-map;
};
reserved@86400000 {
reg = <0x0 0x86400000 0x0 0x400000>;
no-map;
};
mpss_mem: mpss@86c00000 {
reg = <0x0 0x86c00000 0x0 0x6a00000>;
no-map;
};
adsp_fw_mem: adsp@8d600000 {
reg = <0x0 0x8d600000 0x0 0x1100000>;
no-map;
};
wcnss_fw_mem: wcnss@8e700000 {
reg = <0x0 0x8e700000 0x0 0x700000>;
no-map;
};
dfps_data_mem: dfps-data@90000000 {
reg = <0 0x90000000 0 0x1000>;
no-map;
};
cont_splash_mem: cont-splash@90001000 {
reg = <0x0 0x90001000 0x0 0x13ff000>;
no-map;
};
venus_mem: venus@91400000 {
reg = <0x0 0x91400000 0x0 0x700000>;
no-map;
};
mba_mem: mba@92000000 {
reg = <0x0 0x92000000 0x0 0x100000>;
no-map;
};
rmtfs@f2d00000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0 0xf2d00000 0x0 0x180000>;
no-map;
qcom,client-id = <1>;
};
};
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
smp2p_adsp_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
smp2p_adsp_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-modem {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
smp2p_modem_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
smp2p_modem_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-wcnss {
compatible = "qcom,smp2p";
qcom,smem = <451>, <431>;
interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 18>;
qcom,local-pid = <0>;
qcom,remote-pid = <4>;
smp2p_wcnss_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
smp2p_wcnss_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smsm {
compatible = "qcom,smsm";
#address-cells = <1>;
#size-cells = <0>;
qcom,ipc-1 = <&apcs 8 13>;
qcom,ipc-3 = <&apcs 8 19>;
apps_smsm: apps@0 {
reg = <0>;
#qcom,smem-state-cells = <1>;
};
modem_smsm: modem@1 {
reg = <1>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
};
wcnss_smsm: wcnss@6 {
reg = <6>;
interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
soc: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
rpm_msg_ram: sram@60000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x00060000 0x8000>;
};
hsusb_phy: phy@79000 {
compatible = "qcom,msm8953-qusb2-phy";
reg = <0x00079000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
<&gcc GCC_QUSB_REF_CLK>;
clock-names = "cfg_ahb", "ref";
qcom,tcsr-syscon = <&tcsr_phy_clk_scheme_sel>;
resets = <&gcc GCC_QUSB2_PHY_BCR>;
status = "disabled";
};
rng@e3000 {
compatible = "qcom,prng";
reg = <0x000e3000 0x1000>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
tsens0: thermal-sensor@4a9000 {
compatible = "qcom,msm8953-tsens", "qcom,tsens-v2";
reg = <0x004a9000 0x1000>, /* TM */
<0x004a8000 0x1000>; /* SROT */
#qcom,sensors = <16>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
restart@4ab000 {
compatible = "qcom,pshold";
reg = <0x004ab000 0x4>;
};
tlmm: pinctrl@1000000 {
compatible = "qcom,msm8953-pinctrl";
reg = <0x01000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 142>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
uart_console_active: uart-console-active-state {
pins = "gpio4", "gpio5";
function = "blsp_uart2";
drive-strength = <2>;
bias-disable;
};
uart_console_sleep: uart-console-sleep-state {
pins = "gpio4", "gpio5";
function = "blsp_uart2";
drive-strength = <2>;
bias-pull-down;
};
sdc1_clk_on: sdc1-clk-on-state {
pins = "sdc1_clk";
bias-disable;
drive-strength = <16>;
};
sdc1_clk_off: sdc1-clk-off-state {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
sdc1_cmd_on: sdc1-cmd-on-state {
pins = "sdc1_cmd";
bias-disable;
drive-strength = <10>;
};
sdc1_cmd_off: sdc1-cmd-off-state {
pins = "sdc1_cmd";
bias-disable;
drive-strength = <2>;
};
sdc1_data_on: sdc1-data-on-state {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <10>;
};
sdc1_data_off: sdc1-data-off-state {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
sdc1_rclk_on: sdc1-rclk-on-state {
pins = "sdc1_rclk";
bias-pull-down;
};
sdc1_rclk_off: sdc1-rclk-off-state {
pins = "sdc1_rclk";
bias-pull-down;
};
sdc2_clk_on: sdc2-clk-on-state {
pins = "sdc2_clk";
drive-strength = <16>;
bias-disable;
};
sdc2_clk_off: sdc2-clk-off-state {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
sdc2_cmd_on: sdc2-cmd-on-state {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
sdc2_cmd_off: sdc2-cmd-off-state {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
sdc2_data_on: sdc2-data-on-state {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
sdc2_data_off: sdc2-data-off-state {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
};
sdc2_cd_on: cd-on-state {
pins = "gpio133";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
sdc2_cd_off: cd-off-state {
pins = "gpio133";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
gpio_key_default: gpio-key-default-state {
pins = "gpio85";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
i2c_1_default: i2c-1-default-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
i2c_1_sleep: i2c-1-sleep-state {
pins = "gpio2", "gpio3";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
i2c_2_default: i2c-2-default-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
i2c_2_sleep: i2c-2-sleep-state {
pins = "gpio6", "gpio7";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
i2c_3_default: i2c-3-default-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
i2c_3_sleep: i2c-3-sleep-state {
pins = "gpio10", "gpio11";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
i2c_4_default: i2c-4-default-state {
pins = "gpio14", "gpio15";
function = "blsp_i2c4";
drive-strength = <2>;
bias-disable;
};
i2c_4_sleep: i2c-4-sleep-state {
pins = "gpio14", "gpio15";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
i2c_5_default: i2c-5-default-state {
pins = "gpio18", "gpio19";
function = "blsp_i2c5";
drive-strength = <2>;
bias-disable;
};
i2c_5_sleep: i2c-5-sleep-state {
pins = "gpio18", "gpio19";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
i2c_6_default: i2c-6-default-state {
pins = "gpio22", "gpio23";
function = "blsp_i2c6";
drive-strength = <2>;
bias-disable;
};
i2c_6_sleep: i2c-6-sleep-state {
pins = "gpio22", "gpio23";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
i2c_7_default: i2c-7-default-state {
pins = "gpio135", "gpio136";
function = "blsp_i2c7";
drive-strength = <2>;
bias-disable;
};
i2c_7_sleep: i2c-7-sleep-state {
pins = "gpio135", "gpio136";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
i2c_8_default: i2c-8-default-state {
pins = "gpio98", "gpio99";
function = "blsp_i2c8";
drive-strength = <2>;
bias-disable;
};
i2c_8_sleep: i2c-8-sleep-state {
pins = "gpio98", "gpio99";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
wcnss_pin_a: wcnss-active-state {
wcss-wlan2-pins {
pins = "gpio76";
function = "wcss_wlan2";
drive-strength = <6>;
bias-pull-up;
};
wcss-wlan1-pins {
pins = "gpio77";
function = "wcss_wlan1";
drive-strength = <6>;
bias-pull-up;
};
wcss-wlan0-pins {
pins = "gpio78";
function = "wcss_wlan0";
drive-strength = <6>;
bias-pull-up;
};
wcss-wlan-pins {
pins = "gpio79", "gpio80";
function = "wcss_wlan";
drive-strength = <6>;
bias-pull-up;
};
};
};
gcc: clock-controller@1800000 {
compatible = "qcom,gcc-msm8953";
reg = <0x01800000 0x80000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&sleep_clk>,
<&mdss_dsi0_phy 1>,
<&mdss_dsi0_phy 0>,
<&mdss_dsi1_phy 1>,
<&mdss_dsi1_phy 0>;
clock-names = "xo",
"sleep",
"dsi0pll",
"dsi0pllbyte",
"dsi1pll",
"dsi1pllbyte";
};
tcsr_mutex: hwlock@1905000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01905000 0x20000>;
#hwlock-cells = <1>;
};
tcsr: syscon@1937000 {
compatible = "qcom,tcsr-msm8953", "syscon";
reg = <0x01937000 0x30000>;
};
tcsr_phy_clk_scheme_sel: syscon@193f044 {
compatible = "qcom,tcsr-msm8953", "syscon";
reg = <0x0193f044 0x4>;
};
mdss: display-subsystem@1a00000 {
compatible = "qcom,mdss";
reg = <0x01a00000 0x1000>,
<0x01ab0000 0x1040>;
reg-names = "mdss_phys",
"vbif_phys";
power-domains = <&gcc MDSS_GDSC>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
clocks = <&gcc GCC_MDSS_AHB_CLK>,
<&gcc GCC_MDSS_AXI_CLK>,
<&gcc GCC_MDSS_VSYNC_CLK>,
<&gcc GCC_MDSS_MDP_CLK>;
clock-names = "iface",
"bus",
"vsync",
"core";
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
mdp: display-controller@1a01000 {
compatible = "qcom,msm8953-mdp5", "qcom,mdp5";
reg = <0x01a01000 0x89000>;
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
interrupts = <0>;
power-domains = <&gcc MDSS_GDSC>;
clocks = <&gcc GCC_MDSS_AHB_CLK>,
<&gcc GCC_MDSS_AXI_CLK>,
<&gcc GCC_MDSS_MDP_CLK>,
<&gcc GCC_MDSS_VSYNC_CLK>;
clock-names = "iface",
"bus",
"core",
"vsync";
iommus = <&apps_iommu 0x15>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdp5_intf1_out: endpoint {
remote-endpoint = <&mdss_dsi0_in>;
};
};
port@1 {
reg = <1>;
mdp5_intf2_out: endpoint {
remote-endpoint = <&mdss_dsi1_in>;
};
};
};
};
mdss_dsi0: dsi@1a94000 {
compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x01a94000 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <4>;
assigned-clocks = <&gcc BYTE0_CLK_SRC>,
<&gcc PCLK0_CLK_SRC>;
assigned-clock-parents = <&mdss_dsi0_phy 0>,
<&mdss_dsi0_phy 1>;
clocks = <&gcc GCC_MDSS_MDP_CLK>,
<&gcc GCC_MDSS_AHB_CLK>,
<&gcc GCC_MDSS_AXI_CLK>,
<&gcc GCC_MDSS_BYTE0_CLK>,
<&gcc GCC_MDSS_PCLK0_CLK>,
<&gcc GCC_MDSS_ESC0_CLK>;
clock-names = "mdp_core",
"iface",
"bus",
"byte",
"pixel",
"core";
phys = <&mdss_dsi0_phy>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dsi0_in: endpoint {
remote-endpoint = <&mdp5_intf1_out>;
};
};
port@1 {
reg = <1>;
mdss_dsi0_out: endpoint {
};
};
};
};
mdss_dsi0_phy: phy@1a94400 {
compatible = "qcom,dsi-phy-14nm-8953";
reg = <0x01a94400 0x100>,
<0x01a94500 0x300>,
<0x01a94800 0x188>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "ref";
status = "disabled";
};
mdss_dsi1: dsi@1a96000 {
compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x01a96000 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <5>;
assigned-clocks = <&gcc BYTE1_CLK_SRC>,
<&gcc PCLK1_CLK_SRC>;
assigned-clock-parents = <&mdss_dsi1_phy 0>,
<&mdss_dsi1_phy 1>;
clocks = <&gcc GCC_MDSS_MDP_CLK>,
<&gcc GCC_MDSS_AHB_CLK>,
<&gcc GCC_MDSS_AXI_CLK>,
<&gcc GCC_MDSS_BYTE1_CLK>,
<&gcc GCC_MDSS_PCLK1_CLK>,
<&gcc GCC_MDSS_ESC1_CLK>;
clock-names = "mdp_core",
"iface",
"bus",
"byte",
"pixel",
"core";
phys = <&mdss_dsi1_phy>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dsi1_in: endpoint {
remote-endpoint = <&mdp5_intf2_out>;
};
};
port@1 {
reg = <1>;
mdss_dsi1_out: endpoint {
};
};
};
};
mdss_dsi1_phy: phy@1a96400 {
compatible = "qcom,dsi-phy-14nm-8953";
reg = <0x01a96400 0x100>,
<0x01a96500 0x300>,
<0x01a96800 0x188>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "ref";
status = "disabled";
};
};
apps_iommu: iommu@1e20000 {
compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
ranges = <0 0x01e20000 0x20000>;
clocks = <&gcc GCC_SMMU_CFG_CLK>,
<&gcc GCC_APSS_TCU_ASYNC_CLK>;
clock-names = "iface", "bus";
qcom,iommu-secure-id = <17>;
#address-cells = <1>;
#iommu-cells = <1>;
#size-cells = <1>;
/* VFE */
iommu-ctx@14000 {
compatible = "qcom,msm-iommu-v1-ns";
reg = <0x14000 0x1000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
};
/* MDP_0 */
iommu-ctx@15000 {
compatible = "qcom,msm-iommu-v1-ns";
reg = <0x15000 0x1000>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
};
/* VENUS_NS */
iommu-ctx@16000 {
compatible = "qcom,msm-iommu-v1-ns";
reg = <0x16000 0x1000>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
};
};
spmi_bus: spmi@200f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0200f000 0x1000>,
<0x02400000 0x800000>,
<0x02c00000 0x800000>,
<0x03800000 0x200000>,
<0x0200a000 0x2100>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
interrupt-controller;
#interrupt-cells = <4>;
#address-cells = <2>;
#size-cells = <0>;
};
mpss: remoteproc@4080000 {
compatible = "qcom,msm8953-mss-pil";
reg = <0x04080000 0x100>,
<0x04020000 0x040>;
reg-names = "qdsp6", "rmb";
interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
power-domains = <&rpmpd MSM8953_VDDCX>,
<&rpmpd MSM8953_VDDMX>,
<&rpmpd MSM8953_VDDMD>;
power-domain-names = "cx", "mx","mss";
clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
<&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
<&gcc GCC_BOOT_ROM_AHB_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "bus", "mem", "xo";
qcom,smem-states = <&smp2p_modem_out 0>;
qcom,smem-state-names = "stop";
resets = <&gcc GCC_MSS_BCR>;
reset-names = "mss_restart";
qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
status = "disabled";
mba {
memory-region = <&mba_mem>;
};
mpss {
memory-region = <&mpss_mem>;
};
smd-edge {
interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
qcom,smd-edge = <0>;
qcom,ipc = <&apcs 8 12>;
qcom,remote-pid = <1>;
label = "modem";
};
};
usb3: usb@70f8800 {
compatible = "qcom,msm8953-dwc3", "qcom,dwc3";
reg = <0x070f8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq";
clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
<&gcc GCC_USB30_MASTER_CLK>,
<&gcc GCC_PCNOC_USB3_AXI_CLK>,
<&gcc GCC_USB30_SLEEP_CLK>,
<&gcc GCC_USB30_MOCK_UTMI_CLK>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
"mock_utmi";
assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_MASTER_CLK>;
assigned-clock-rates = <19200000>, <133330000>;
power-domains = <&gcc USB30_GDSC>;
qcom,select-utmi-as-pipe-clk;
status = "disabled";
usb3_dwc3: usb@7000000 {
compatible = "snps,dwc3";
reg = <0x07000000 0xcc00>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hsusb_phy>;
phy-names = "usb2-phy";
snps,usb2-gadget-lpm-disable;
snps,dis-u1-entry-quirk;
snps,dis-u2-entry-quirk;
snps,is-utmi-l1-suspend;
snps,hird-threshold = /bits/ 8 <0x00>;
maximum-speed = "high-speed";
};
};
sdhc_1: mmc@7824900 {
compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
reg = <0x07824900 0x500>, <0x07824000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "core", "xo";
power-domains = <&rpmpd MSM8953_VDDCX>;
operating-points-v2 = <&sdhc1_opp_table>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
mmc-hs400-1_8v;
mmc-hs200-1_8v;
mmc-ddr-1_8v;
bus-width = <8>;
non-removable;
status = "disabled";
sdhc1_opp_table: opp-table-sdhc1 {
compatible = "operating-points-v2";
opp-25000000 {
opp-hz = /bits/ 64 <25000000>;
required-opps = <&rpmpd_opp_low_svs>;
};
opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
required-opps = <&rpmpd_opp_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmpd_opp_svs>;
};
opp-192000000 {
opp-hz = /bits/ 64 <192000000>;
required-opps = <&rpmpd_opp_nom>;
};
opp-384000000 {
opp-hz = /bits/ 64 <384000000>;
required-opps = <&rpmpd_opp_nom>;
};
};
};
sdhc_2: mmc@7864900 {
compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
reg = <0x07864900 0x500>, <0x07864000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "core", "xo";
power-domains = <&rpmpd MSM8953_VDDCX>;
operating-points-v2 = <&sdhc2_opp_table>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
bus-width = <4>;
status = "disabled";
sdhc2_opp_table: opp-table-sdhc2 {
compatible = "operating-points-v2";
opp-25000000 {
opp-hz = /bits/ 64 <25000000>;
required-opps = <&rpmpd_opp_low_svs>;
};
opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
required-opps = <&rpmpd_opp_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmpd_opp_svs>;
};
opp-177770000 {
opp-hz = /bits/ 64 <177770000>;
required-opps = <&rpmpd_opp_nom>;
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
required-opps = <&rpmpd_opp_nom>;
};
};
};
blsp1_dma: dma-controller@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x1f000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
num-channels = <12>;
#dma-cells = <1>;
qcom,ee = <0>;
qcom,num-ees = <4>;
qcom,controlled-remotely;
};
uart_0: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078af000 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
i2c_1: i2c@78b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_1_default>;
pinctrl-1 = <&i2c_1_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_2: i2c@78b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b6000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_2_default>;
pinctrl-1 = <&i2c_2_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_3: i2c@78b7000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_3_default>;
pinctrl-1 = <&i2c_3_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_4: i2c@78b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b8000 0x600>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_4_default>;
pinctrl-1 = <&i2c_4_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp2_dma: dma-controller@7ac4000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07ac4000 0x1f000>;
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "bam_clk";
num-channels = <12>;
#dma-cells = <1>;
qcom,ee = <0>;
qcom,num-ees = <4>;
qcom,controlled-remotely;
};
i2c_5: i2c@7af5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07af5000 0x600>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_5_default>;
pinctrl-1 = <&i2c_5_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_6: i2c@7af6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07af6000 0x600>;
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_6_default>;
pinctrl-1 = <&i2c_6_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_7: i2c@7af7000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07af7000 0x600>;
interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_7_default>;
pinctrl-1 = <&i2c_7_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_8: i2c@7af8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07af8000 0x600>;
interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_8_default>;
pinctrl-1 = <&i2c_8_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
wcnss: remoteproc@a204000 {
compatible = "qcom,pronto-v3-pil", "qcom,pronto";
reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
reg-names = "ccu", "dxe", "pmu";
memory-region = <&wcnss_fw_mem>;
interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
<&smp2p_wcnss_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_wcnss_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_wcnss_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_wcnss_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
power-domains = <&rpmpd MSM8953_VDDCX>,
<&rpmpd MSM8953_VDDMX>;
power-domain-names = "cx", "mx";
qcom,smem-states = <&smp2p_wcnss_out 0>;
qcom,smem-state-names = "stop";
pinctrl-names = "default";
pinctrl-0 = <&wcnss_pin_a>;
status = "disabled";
wcnss_iris: iris {
/* Separate chip, compatible is board-specific */
clocks = <&rpmcc RPM_SMD_RF_CLK2>;
clock-names = "xo";
};
smd-edge {
interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 17>;
qcom,smd-edge = <6>;
qcom,remote-pid = <4>;
label = "pronto";
wcnss_ctrl: wcnss {
compatible = "qcom,wcnss";
qcom,smd-channels = "WCNSS_CTRL";
qcom,mmio = <&wcnss>;
wcnss_bt: bluetooth {
compatible = "qcom,wcnss-bt";
};
wcnss_wifi: wifi {
compatible = "qcom,wcnss-wlan";
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
qcom,smem-state-names = "tx-enable",
"tx-rings-empty";
};
};
};
};
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
};
apcs: mailbox@b011000 {
compatible = "qcom,msm8953-apcs-kpss-global", "syscon";
reg = <0x0b011000 0x1000>;
#mbox-cells = <1>;
};
timer@b120000 {
compatible = "arm,armv7-timer-mem";
reg = <0x0b120000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
frame@b121000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b121000 0x1000>,
<0x0b122000 0x1000>;
};
frame@b123000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b123000 0x1000>;
status = "disabled";
};
frame@b124000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b124000 0x1000>;
status = "disabled";
};
frame@b125000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b125000 0x1000>;
status = "disabled";
};
frame@b126000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b126000 0x1000>;
status = "disabled";
};
frame@b127000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b127000 0x1000>;
status = "disabled";
};
frame@b128000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b128000 0x1000>;
status = "disabled";
};
};
lpass: remoteproc@c200000 {
compatible = "qcom,msm8953-adsp-pil";
reg = <0x0c200000 0x100>;
interrupts-extended = <&intc 0 293 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "xo";
power-domains = <&rpmpd MSM8953_VDDCX>;
power-domain-names = "cx";
memory-region = <&adsp_fw_mem>;
qcom,smem-states = <&smp2p_adsp_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
smd-edge {
interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
label = "lpass";
mboxes = <&apcs 8>;
qcom,smd-edge = <1>;
qcom,remote-pid = <2>;
apr {
compatible = "qcom,apr-v2";
qcom,smd-channels = "apr_audio_svc";
qcom,apr-domain = <APR_DOMAIN_ADSP>;
#address-cells = <1>;
#size-cells = <0>;
q6core: service@3 {
reg = <APR_SVC_ADSP_CORE>;
compatible = "qcom,q6core";
};
q6afe: service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
q6afedai: dais {
compatible = "qcom,q6afe-dais";
#address-cells = <1>;
#size-cells = <0>;
#sound-dai-cells = <1>;
dai@16 {
reg = <PRIMARY_MI2S_RX>;
qcom,sd-lines = <0 1>;
};
dai@20 {
reg = <TERTIARY_MI2S_TX>;
qcom,sd-lines = <0 1>;
};
dai@127 {
reg = <QUINARY_MI2S_RX>;
qcom,sd-lines = <0>;
};
};
q6afecc: clock-controller {
compatible = "qcom,q6afe-clocks";
#clock-cells = <2>;
};
};
q6asm: service@7 {
compatible = "qcom,q6asm";
reg = <APR_SVC_ASM>;
q6asmdai: dais {
compatible = "qcom,q6asm-dais";
#address-cells = <1>;
#size-cells = <0>;
#sound-dai-cells = <1>;
dai@0 {
reg = <0>;
direction = <Q6ASM_DAI_RX>;
};
dai@1 {
reg = <1>;
direction = <Q6ASM_DAI_TX>;
};
dai@2 {
reg = <2>;
direction = <Q6ASM_DAI_RX>;
};
dai@3 {
reg = <3>;
direction = <Q6ASM_DAI_RX>;
is-compress-dai;
};
};
};
q6adm: service@8 {
compatible = "qcom,q6adm";
reg = <APR_SVC_ADM>;
q6routing: routing {
compatible = "qcom,q6adm-routing";
#sound-dai-cells = <0>;
};
};
};
};
};
};
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 9>;
trips {
cpu0_alert: trip-point0 {
temperature = <80000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_crit: crit {
temperature = <100000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu0_alert>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 10>;
trips {
cpu1_alert: trip-point0 {
temperature = <80000>;
hysteresis = <2000>;
type = "passive";
};
cpu1_crit: crit {
temperature = <100000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu1_alert>;
cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 11>;
trips {
cpu2_alert: trip-point0 {
temperature = <80000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_crit: crit {
temperature = <100000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu2_alert>;
cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 12>;
trips {
cpu3_alert: trip-point0 {
temperature = <80000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_crit: crit {
temperature = <100000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu3_alert>;
cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu4-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 4>;
trips {
cpu4_alert: trip-point0 {
temperature = <80000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_crit: crit {
temperature = <100000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu4_alert>;
cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu5-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 5>;
trips {
cpu5_alert: trip-point0 {
temperature = <80000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_crit: crit {
temperature = <100000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu5_alert>;
cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu6-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 6>;
trips {
cpu6_alert: trip-point0 {
temperature = <80000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_crit: crit {
temperature = <100000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu6_alert>;
cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu7-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 7>;
trips {
cpu7_alert: trip-point0 {
temperature = <80000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_crit: crit {
temperature = <100000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu7_alert>;
cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
};