// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2022, Alec Su <ae40515@yahoo.com.tw>
*/
/dts-v1/;
#include "msm8996pro.dtsi"
#include "msm8996-xiaomi-common.dtsi"
#include "pmi8996.dtsi"
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
/ {
model = "Xiaomi Mi 5s Plus";
compatible = "xiaomi,natrium", "qcom,msm8996pro", "qcom,msm8996";
chassis-type = "handset";
qcom,msm-id = <305 0x10000>;
qcom,board-id = <47 0>;
};
&adsp_pil {
firmware-name = "qcom/msm8996/natrium/adsp.mbn";
};
&blsp2_i2c6 {
touchscreen@20 {
compatible = "syna,rmi4-i2c";
reg = <0x20>;
interrupt-parent = <&tlmm>;
interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
vdd-supply = <&vdd_3v2_tp>;
syna,reset-delay-ms = <200>;
syna,startup-delay-ms = <5>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&touchscreen_default>;
pinctrl-1 = <&touchscreen_sleep>;
};
};
&gpu {
zap-shader {
firmware-name = "qcom/msm8996/natrium/a530_zap.mbn";
};
};
&mdss_dsi0 {
status = "okay";
vdda-supply = <&vreg_l2a_1p25>;
vcca-supply = <&vreg_l28a_0p925>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
panel: panel@0 {
compatible = "jdi,fhd-r63452";
reg = <0>;
reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
backlight = <&pmi8994_wled>;
port {
panel_in: endpoint {
remote-endpoint = <&mdss_dsi0_out>;
};
};
};
};
&mdss_dsi0_out {
remote-endpoint = <&panel_in>;
};
&mss_pil {
firmware-name = "qcom/msm8996/natrium/mba.mbn",
"qcom/msm8996/natrium/modem.mbn";
};
&pmi8994_wled {
status = "okay";
qcom,enabled-strings = <0 1>;
qcom,switching-freq = <600>;
};
&q6asmdai {
dai@0 {
reg = <0>;
};
dai@1 {
reg = <1>;
};
dai@2 {
reg = <2>;
};
};
&slpi_pil {
firmware-name = "qcom/msm8996/natrium/slpi.mbn";
};
&sound {
compatible = "qcom,apq8096-sndcard";
model = "natrium";
audio-routing = "RX_BIAS", "MCLK";
mm1-dai-link {
link-name = "MultiMedia1";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
};
};
mm2-dai-link {
link-name = "MultiMedia2";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
};
};
mm3-dai-link {
link-name = "MultiMedia3";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
};
};
slim-dai-link {
link-name = "SLIM Playback";
cpu {
sound-dai = <&q6afedai SLIMBUS_6_RX>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&wcd9335 6>;
};
};
slimcap-dai-link {
link-name = "SLIM Capture";
cpu {
sound-dai = <&q6afedai SLIMBUS_0_TX>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&wcd9335 1>;
};
};
};
&venus {
firmware-name = "qcom/msm8996/natrium/venus.mbn";
};
&rpm_requests {
regulators-0 {
vreg_l3a_0p875: l3 {
regulator-name = "vreg_l3a_0p875";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1300000>;
};
vreg_l11a_1p1: l11 {
regulator-name = "vreg_l11a_1p1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
vreg_l17a_2p8: l17 {
regulator-name = "vreg_l17a_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
vreg_l18a_2p8: l18 {
regulator-name = "vreg_l18a_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
vreg_l29a_2p8: l29 {
regulator-name = "vreg_l29a_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
};
};
&pm8994_gpios {
gpio-line-names =
"NC", /* GPIO_1 */
"VOL_UP_N", /* GPIO_2 */
"SPKR_ID", /* GPIO_3 */
"PWM_HAPTICS", /* GPIO_4 */
"INFARED_DRV", /* GPIO_5 */
"NC", /* GPIO_6 */
"KEYPAD_LED_EN_A", /* GPIO_7 */
"WL_EN", /* GPIO_8 */
"3P3_ENABLE", /* GPIO_9 */
"NC", /* GPIO_10 */
"NC", /* GPIO_11 */
"NC", /* GPIO_12 */
"NC", /* GPIO_13 */
"NC", /* GPIO_14 */
"DIVCLK1_CDC", /* GPIO_15 */
"DIVCLK2_HAPTICS", /* GPIO_16 */
"NC", /* GPIO_17 */
"32KHz_CLK_IN", /* GPIO_18 */
"BT_EN", /* GPIO_19 */
"PMIC_SLB", /* GPIO_20 */
"UIM_BATT_ALARM", /* GPIO_21 */
"NC"; /* GPIO_22 */
};
&pm8994_mpps {
gpio-line-names =
"NC", /* MPP_1 */
"CCI_TIMER1", /* MPP_2 */
"PMIC_SLB", /* MPP_3 */
"EXT_FET_WLED_PWR_EN_N",/* MPP_4 */
"NC", /* MPP_5 */
"NC", /* MPP_6 */
"NC", /* MPP_7 */
"NC"; /* MPP_8 */
};
&pmi8994_gpios {
gpio-line-names =
"NC", /* GPIO_1 */
"SPKR_PA_EN", /* GPIO_2 */
"NC", /* GPIO_3 */
"NC", /* GPIO_4 */
"NC", /* GPIO_5 */
"NC", /* GPIO_6 */
"NC", /* GPIO_7 */
"NC", /* GPIO_8 */
"NC", /* GPIO_9 */
"NC"; /* GPIO_10 */
};
&tlmm {
gpio-line-names =
"ESE_SPI_MOSI", /* GPIO_0 */
"ESE_SPI_MISO", /* GPIO_1 */
"NC", /* GPIO_2 */
"ESE_SPI_CLK", /* GPIO_3 */
"MSM_UART_TX", /* GPIO_4 */
"MSM_UART_RX", /* GPIO_5 */
"NFC_I2C_SDA", /* GPIO_6 */
"NFC_I2C_SCL", /* GPIO_7 */
"LCD0_RESET_N", /* GPIO_8 */
"NFC_IRQ", /* GPIO_9 */
"LCD_TE", /* GPIO_10 */
"LCD_ID_DET1", /* GPIO_11 */
"NFC_DISABLE", /* GPIO_12 */
"CAM_MCLK0", /* GPIO_13 */
"CAM_MCLK1", /* GPIO_14 */
"CAM_MCLK2", /* GPIO_15 */
"ESE_PWR_REQ", /* GPIO_16 */
"CCI_I2C_SDA0", /* GPIO_17 */
"CCI_I2C_SCL0", /* GPIO_18 */
"CCI_I2C_SDA1", /* GPIO_19 */
"CCI_I2C_SCL1", /* GPIO_20 */
"NFC_DWL_REQ", /* GPIO_21 */
"CCI_TIMER1", /* GPIO_22 */
"WEBCAM1_RESET_N", /* GPIO_23 */
"ESE_IRQ", /* GPIO_24 */
"NC", /* GPIO_25 */
"WEBCAM1_STANDBY", /* GPIO_26 */
"NC", /* GPIO_27 */
"NC", /* GPIO_28 */
"NC", /* GPIO_29 */
"CAM_VDD_1P2_EN_2", /* GPIO_30 */
"CAM_RESET_0", /* GPIO_31 */
"CAM_RESET_1", /* GPIO_32 */
"NC", /* GPIO_33 */
"NC", /* GPIO_34 */
"PCI_E0_RST_N", /* GPIO_35 */
"PCI_E0_CLKREQ_N", /* GPIO_36 */
"PCI_E0_WAKE", /* GPIO_37 */
"CHARGER_INT", /* GPIO_38 */
"CHARGER_RESET", /* GPIO_39 */
"NC", /* GPIO_40 */
"QCA_UART_TXD", /* GPIO_41 */
"QCA_UART_RXD", /* GPIO_42 */
"QCA_UART_CTS", /* GPIO_43 */
"QCA_UART_RTS", /* GPIO_44 */
"MAWC_UART_TX", /* GPIO_45 */
"MAWC_UART_RX", /* GPIO_46 */
"NC", /* GPIO_47 */
"NC", /* GPIO_48 */
"NC", /* GPIO_49 */
"FP_SPI_RST", /* GPIO_50 */
"TYPEC_I2C_SDA", /* GPIO_51 */
"TYPEC_I2C_SCL", /* GPIO_52 */
"CODEC_INT2_N", /* GPIO_53 */
"CODEC_INT1_N", /* GPIO_54 */
"APPS_I2C7_SDA", /* GPIO_55 */
"APPS_I2C7_SCL", /* GPIO_56 */
"FORCE_USB_BOOT", /* GPIO_57 */
"NC", /* GPIO_58 */
"NC", /* GPIO_59 */
"NC", /* GPIO_60 */
"NC", /* GPIO_61 */
"ESE_RSTN", /* GPIO_62 */
"TYPEC_INT", /* GPIO_63 */
"CODEC_RESET_N", /* GPIO_64 */
"PCM_CLK", /* GPIO_65 */
"PCM_SYNC", /* GPIO_66 */
"PCM_DIN", /* GPIO_67 */
"PCM_DOUT", /* GPIO_68 */
"CDC_44K1_CLK", /* GPIO_69 */
"SLIMBUS_CLK", /* GPIO_70 */
"SLIMBUS_DATA0", /* GPIO_71 */
"SLIMBUS_DATA1", /* GPIO_72 */
"LDO_5V_IN_EN", /* GPIO_73 */
"TYPEC_EN_N", /* GPIO_74 */
"NC", /* GPIO_75 */
"NC", /* GPIO_76 */
"NC", /* GPIO_77 */
"NC", /* GPIO_78 */
"NC", /* GPIO_79 */
"SENSOR_RESET_N", /* GPIO_80 */
"FP_SPI_MOSI", /* GPIO_81 */
"FP_SPI_MISO", /* GPIO_82 */
"FP_SPI_CS_N", /* GPIO_83 */
"FP_SPI_CLK", /* GPIO_84 */
"NC", /* GPIO_85 */
"CAM_VDD_1P2_EN", /* GPIO_86 */
"MSM_TS_I2C_SDA", /* GPIO_87 */
"MSM_TS_I2C_SCL", /* GPIO_88 */
"TS_RESOUT_N", /* GPIO_89 */
"ESE_SPI_CS_N", /* GPIO_90 */
"NC", /* GPIO_91 */
"CAM2_AVDD_EN", /* GPIO_92 */
"CAM2_VCM_EN", /* GPIO_93 */
"NC", /* GPIO_94 */
"NC", /* GPIO_95 */
"NC", /* GPIO_96 */
"GRFC_0", /* GPIO_97 */
"GRFC_1", /* GPIO_98 */
"NC", /* GPIO_99 */
"GRFC_3", /* GPIO_100 */
"GRFC_4", /* GPIO_101 */
"GRFC_5", /* GPIO_102 */
"NC", /* GPIO_103 */
"GRFC_7", /* GPIO_104 */
"UIM2_DATA", /* GPIO_105 */
"UIM2_CLK", /* GPIO_106 */
"UIM2_RESET", /* GPIO_107 */
"UIM2_PRESENT", /* GPIO_108 */
"UIM1_DATA", /* GPIO_109 */
"UIM1_CLK", /* GPIO_110 */
"UIM1_RESET", /* GPIO_111 */
"UIM1_PRESENT", /* GPIO_112 */
"UIM_BATT_ALARM", /* GPIO_113 */
"GRFC_8", /* GPIO_114 */
"GRFC_9", /* GPIO_115 */
"TX_GTR_THRES", /* GPIO_116 */
"ACCEL_INT", /* GPIO_117 */
"GYRO_INT", /* GPIO_118 */
"COMPASS_INT", /* GPIO_119 */
"PROXIMITY_INT_N", /* GPIO_120 */
"FP_IRQ", /* GPIO_121 */
"P_SENSE", /* GPIO_122 */
"HALL_INTR2", /* GPIO_123 */
"HALL_INTR1", /* GPIO_124 */
"TS_INT_N", /* GPIO_125 */
"NC", /* GPIO_126 */
"GRFC_11", /* GPIO_127 */
"NC", /* GPIO_128 */
"EXT_GPS_LNA_EN", /* GPIO_129 */
"NC", /* GPIO_130 */
"LCD_ID_DET2", /* GPIO_131 */
"LCD_TE2", /* GPIO_132 */
"GRFC_14", /* GPIO_133 */
"GSM_TX2_PHASE_D", /* GPIO_134 */
"NC", /* GPIO_135 */
"GRFC_15", /* GPIO_136 */
"RFFE3_DATA", /* GPIO_137 */
"RFFE3_CLK", /* GPIO_138 */
"NC", /* GPIO_139 */
"NC", /* GPIO_140 */
"RFFE5_DATA", /* GPIO_141 */
"RFFE5_CLK", /* GPIO_142 */
"NC", /* GPIO_143 */
"COEX_UART_TX", /* GPIO_144 */
"COEX_UART_RX", /* GPIO_145 */
"RFFE2_DATA", /* GPIO_146 */
"RFFE2_CLK", /* GPIO_147 */
"RFFE1_DATA", /* GPIO_148 */
"RFFE1_CLK"; /* GPIO_149 */
touchscreen_default: touchscreen-default-state {
pins = "gpio89", "gpio125";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};
touchscreen_sleep: touchscreen-sleep-state {
pins = "gpio89", "gpio125";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};