// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) /* * Copyright (C) 2022 Marek Vasut <marex@denx.de> */ / { aliases { ethernet0 = ðernet0; mmc0 = &sdmmc1; mmc1 = &sdmmc2; serial0 = &uart4; serial1 = &uart7; spi0 = &qspi; }; chosen { stdout-path = "serial0:115200n8"; }; sd_switch: regulator-sd_switch { compatible = "regulator-gpio"; regulator-name = "sd_switch"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2900000>; regulator-type = "voltage"; regulator-always-on; gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>; gpios-states = <0>; states = <1800000 0x1>, <2900000 0x0>; }; }; &adc { pinctrl-names = "default"; pinctrl-0 = <&adc12_ain_pins_b>; vdd-supply = <&vdd>; vdda-supply = <&vdda>; vref-supply = <&vdda>; status = "okay"; adc1: adc@0 { status = "okay"; channel@0 { reg = <0>; st,min-sample-time-ns = <5000>; }; channel@1 { reg = <1>; st,min-sample-time-ns = <5000>; }; channel@6 { reg = <6>; st,min-sample-time-ns = <5000>; }; }; adc2: adc@100 { status = "okay"; channel@0 { reg = <0>; st,min-sample-time-ns = <5000>; }; channel@1 { reg = <1>; st,min-sample-time-ns = <5000>; }; channel@2 { reg = <2>; st,min-sample-time-ns = <5000>; }; }; }; ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_c>; pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>; pinctrl-names = "default", "sleep"; phy-mode = "rgmii"; max-speed = <1000>; phy-handle = <&phy0>; mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; reset-delay-us = <1000>; reset-post-delay-us = <1000>; phy0: ethernet-phy@7 { reg = <7>; rxc-skew-ps = <1500>; rxdv-skew-ps = <540>; rxd0-skew-ps = <420>; rxd1-skew-ps = <420>; rxd2-skew-ps = <420>; rxd3-skew-ps = <420>; txc-skew-ps = <1440>; txen-skew-ps = <540>; txd0-skew-ps = <420>; txd1-skew-ps = <420>; txd2-skew-ps = <420>; txd3-skew-ps = <420>; }; }; }; &i2c4 { dh_mac_eeprom: eeprom@53 { compatible = "atmel,24c02"; reg = <0x53>; pagesize = <16>; }; }; &sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>; cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; disable-wp; st,sig-dir; st,neg-edge; st,use-ckin; bus-width = <4>; vmmc-supply = <&vdd_sd>; vqmmc-supply = <&sd_switch>; status = "okay"; }; &sdmmc2 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>; pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>; pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>; bus-width = <8>; mmc-ddr-1_8v; no-sd; no-sdio; non-removable; st,neg-edge; vmmc-supply = <&v3v3>; vqmmc-supply = <&v3v3>; status = "okay"; }; &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins_b>; /delete-property/dmas; /delete-property/dma-names; status = "okay"; }; &uart7 { pinctrl-names = "default"; pinctrl-0 = <&uart7_pins_a>; uart-has-rtscts; /delete-property/dmas; /delete-property/dma-names; status = "okay"; }; &usbh_ehci { phys = <&usbphyc_port0>; status = "okay"; }; &usbh_ohci { phys = <&usbphyc_port0>; status = "okay"; }; &usbotg_hs { pinctrl-0 = <&usbotg_hs_pins_a>; pinctrl-names = "default"; phy-names = "usb2-phy"; phys = <&usbphyc_port1 0>; status = "okay"; vbus-supply = <&vbus_otg>; }; &usbphyc { status = "okay"; }; &usbphyc_port0 { phy-supply = <&vdd_usb>; }; &usbphyc_port1 { phy-supply = <&vdd_usb>; };