// SPDX-License-Identifier: GPL-2.0 /* * SGI IOC3 multifunction device driver * * Copyright (C) 2018, 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de> * * Based on work by: * Stanislaw Skowronek <skylark@unaligned.org> * Joshua Kinard <kumba@gentoo.org> * Brent Casavant <bcasavan@sgi.com> - IOC4 master driver * Pat Gefre <pfg@sgi.com> - IOC3 serial port IRQ demuxer */ #include <linux/delay.h> #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/irqdomain.h> #include <linux/mfd/core.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/platform_device.h> #include <linux/platform_data/sgi-w1.h> #include <linux/rtc/ds1685.h> #include <asm/pci/bridge.h> #include <asm/sn/ioc3.h> #define IOC3_IRQ_SERIAL_A 6 #define IOC3_IRQ_SERIAL_B 15 #define IOC3_IRQ_KBD 22 /* Bitmask for selecting which IRQs are level triggered */ #define IOC3_LVL_MASK (BIT(IOC3_IRQ_SERIAL_A) | BIT(IOC3_IRQ_SERIAL_B)) #define M48T35_REG_SIZE 32768 /* size of m48t35 registers */ /* 1.2 us latency timer (40 cycles at 33 MHz) */ #define IOC3_LATENCY 40 struct ioc3_priv_data { struct irq_domain *domain; struct ioc3 __iomem *regs; struct pci_dev *pdev; int domain_irq; }; static void ioc3_irq_ack(struct irq_data *d) { struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d); unsigned int hwirq = irqd_to_hwirq(d); writel(BIT(hwirq), &ipd->regs->sio_ir); } static void ioc3_irq_mask(struct irq_data *d) { struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d); unsigned int hwirq = irqd_to_hwirq(d); writel(BIT(hwirq), &ipd->regs->sio_iec); } static void ioc3_irq_unmask(struct irq_data *d) { struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d); unsigned int hwirq = irqd_to_hwirq(d); writel(BIT(hwirq), &ipd->regs->sio_ies); } static struct irq_chip ioc3_irq_chip = { .name = "IOC3", .irq_ack = ioc3_irq_ack, .irq_mask = ioc3_irq_mask, .irq_unmask = ioc3_irq_unmask, }; static int ioc3_irq_domain_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hwirq) { /* Set level IRQs for every interrupt contained in IOC3_LVL_MASK */ if (BIT(hwirq) & IOC3_LVL_MASK) irq_set_chip_and_handler(irq, &ioc3_irq_chip, handle_level_irq); else irq_set_chip_and_handler(irq, &ioc3_irq_chip, handle_edge_irq); irq_set_chip_data(irq, d->host_data); return 0; } static void ioc3_irq_domain_unmap(struct irq_domain *d, unsigned int irq) { irq_set_chip_and_handler(irq, NULL, NULL); irq_set_chip_data(irq, NULL); } static const struct irq_domain_ops ioc3_irq_domain_ops = { .map = ioc3_irq_domain_map, .unmap = ioc3_irq_domain_unmap, }; static void ioc3_irq_handler(struct irq_desc *desc) { struct irq_domain *domain = irq_desc_get_handler_data(desc); struct ioc3_priv_data *ipd = domain->host_data; struct ioc3 __iomem *regs = ipd->regs; u32 pending, mask; pending = readl(®s->sio_ir); mask = readl(®s->sio_ies); pending &= mask; /* Mask off not enabled interrupts */ if (pending) generic_handle_domain_irq(domain, __ffs(pending)); else spurious_interrupt(); } /* * System boards/BaseIOs use more interrupt pins of the bridge ASIC * to which the IOC3 is connected. Since the IOC3 MFD driver * knows wiring of these extra pins, we use the map_irq function * to get interrupts activated */ static int ioc3_map_irq(struct pci_dev *pdev, int slot, int pin) { struct pci_host_bridge *hbrg = pci_find_host_bridge(pdev->bus); return hbrg->map_irq(pdev, slot, pin); } static int ioc3_irq_domain_setup(struct ioc3_priv_data *ipd, int irq) { struct irq_domain *domain; struct fwnode_handle *fn; fn = irq_domain_alloc_named_fwnode("IOC3"); if (!fn) goto err; domain = irq_domain_create_linear(fn, 24, &ioc3_irq_domain_ops, ipd); if (!domain) { irq_domain_free_fwnode(fn); goto err; } ipd->domain = domain; irq_set_chained_handler_and_data(irq, ioc3_irq_handler, domain); ipd->domain_irq = irq; return 0; err: dev_err(&ipd->pdev->dev, "irq domain setup failed\n"); return -ENOMEM; } static const struct resource ioc3_uarta_resources[] = { DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uarta), sizeof_field(struct ioc3, sregs.uarta)), DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_A) }; static const struct resource ioc3_uartb_resources[] = { DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uartb), sizeof_field(struct ioc3, sregs.uartb)), DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_B) }; static struct mfd_cell ioc3_serial_cells[] = { { .name = "ioc3-serial8250", .resources = ioc3_uarta_resources, .num_resources = ARRAY_SIZE(ioc3_uarta_resources), }, { .name = "ioc3-serial8250", .resources = ioc3_uartb_resources, .num_resources = ARRAY_SIZE(ioc3_uartb_resources), } }; static int ioc3_serial_setup(struct ioc3_priv_data *ipd) { int ret; /* Set gpio pins for RS232/RS422 mode selection */ writel(GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL, &ipd->regs->gpcr_s); /* Select RS232 mode for uart a */ writel(0, &ipd->regs->gppr[6]); /* Select RS232 mode for uart b */ writel(0, &ipd->regs->gppr[7]); /* Switch both ports to 16650 mode */ writel(readl(&ipd->regs->port_a.sscr) & ~SSCR_DMA_EN, &ipd->regs->port_a.sscr); writel(readl(&ipd->regs->port_b.sscr) & ~SSCR_DMA_EN, &ipd->regs->port_b.sscr); udelay(1000); /* Wait until mode switch is done */ ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO, ioc3_serial_cells, ARRAY_SIZE(ioc3_serial_cells), &ipd->pdev->resource[0], 0, ipd->domain); if (ret) { dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n"); return ret; } return 0; } static const struct resource ioc3_kbd_resources[] = { DEFINE_RES_MEM(offsetof(struct ioc3, serio), sizeof_field(struct ioc3, serio)), DEFINE_RES_IRQ(IOC3_IRQ_KBD) }; static struct mfd_cell ioc3_kbd_cells[] = { { .name = "ioc3-kbd", .resources = ioc3_kbd_resources, .num_resources = ARRAY_SIZE(ioc3_kbd_resources), } }; static int ioc3_kbd_setup(struct ioc3_priv_data *ipd) { int ret; ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO, ioc3_kbd_cells, ARRAY_SIZE(ioc3_kbd_cells), &ipd->pdev->resource[0], 0, ipd->domain); if (ret) { dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n"); return ret; } return 0; } static const struct resource ioc3_eth_resources[] = { DEFINE_RES_MEM(offsetof(struct ioc3, eth), sizeof_field(struct ioc3, eth)), DEFINE_RES_MEM(offsetof(struct ioc3, ssram), sizeof_field(struct ioc3, ssram)), DEFINE_RES_IRQ(0) }; static const struct resource ioc3_w1_resources[] = { DEFINE_RES_MEM(offsetof(struct ioc3, mcr), sizeof_field(struct ioc3, mcr)), }; static struct sgi_w1_platform_data ioc3_w1_platform_data; static struct mfd_cell ioc3_eth_cells[] = { { .name = "ioc3-eth", .resources = ioc3_eth_resources, .num_resources = ARRAY_SIZE(ioc3_eth_resources), }, { .name = "sgi_w1", .resources = ioc3_w1_resources, .num_resources = ARRAY_SIZE(ioc3_w1_resources), .platform_data = &ioc3_w1_platform_data, .pdata_size = sizeof(ioc3_w1_platform_data), } }; static int ioc3_eth_setup(struct ioc3_priv_data *ipd) { int ret; /* Enable One-Wire bus */ writel(GPCR_MLAN_EN, &ipd->regs->gpcr_s); /* Generate unique identifier */ snprintf(ioc3_w1_platform_data.dev_id, sizeof(ioc3_w1_platform_data.dev_id), "ioc3-%012llx", ipd->pdev->resource->start); ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO, ioc3_eth_cells, ARRAY_SIZE(ioc3_eth_cells), &ipd->pdev->resource[0], ipd->pdev->irq, NULL); if (ret) { dev_err(&ipd->pdev->dev, "Failed to add ETH/W1 subdev\n"); return ret; } return 0; } static const struct resource ioc3_m48t35_resources[] = { DEFINE_RES_MEM(IOC3_BYTEBUS_DEV0, M48T35_REG_SIZE) }; static struct mfd_cell ioc3_m48t35_cells[] = { { .name = "rtc-m48t35", .resources = ioc3_m48t35_resources, .num_resources = ARRAY_SIZE(ioc3_m48t35_resources), } }; static int ioc3_m48t35_setup(struct ioc3_priv_data *ipd) { int ret; ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO, ioc3_m48t35_cells, ARRAY_SIZE(ioc3_m48t35_cells), &ipd->pdev->resource[0], 0, ipd->domain); if (ret) dev_err(&ipd->pdev->dev, "Failed to add M48T35 subdev\n"); return ret; } static struct ds1685_rtc_platform_data ip30_rtc_platform_data = { .bcd_mode = false, .no_irq = false, .uie_unsupported = true, .access_type = ds1685_reg_indirect, }; static const struct resource ioc3_rtc_ds1685_resources[] = { DEFINE_RES_MEM(IOC3_BYTEBUS_DEV1, 1), DEFINE_RES_MEM(IOC3_BYTEBUS_DEV2, 1), DEFINE_RES_IRQ(0) }; static struct mfd_cell ioc3_ds1685_cells[] = { { .name = "rtc-ds1685", .resources = ioc3_rtc_ds1685_resources, .num_resources = ARRAY_SIZE(ioc3_rtc_ds1685_resources), .platform_data = &ip30_rtc_platform_data, .pdata_size = sizeof(ip30_rtc_platform_data), .id = PLATFORM_DEVID_NONE, } }; static int ioc3_ds1685_setup(struct ioc3_priv_data *ipd) { int ret, irq; irq = ioc3_map_irq(ipd->pdev, 6, 0); ret = mfd_add_devices(&ipd->pdev->dev, 0, ioc3_ds1685_cells, ARRAY_SIZE(ioc3_ds1685_cells), &ipd->pdev->resource[0], irq, NULL); if (ret) dev_err(&ipd->pdev->dev, "Failed to add DS1685 subdev\n"); return ret; }; static const struct resource ioc3_leds_resources[] = { DEFINE_RES_MEM(offsetof(struct ioc3, gppr[0]), sizeof_field(struct ioc3, gppr[0])), DEFINE_RES_MEM(offsetof(struct ioc3, gppr[1]), sizeof_field(struct ioc3, gppr[1])), }; static struct mfd_cell ioc3_led_cells[] = { { .name = "ip30-leds", .resources = ioc3_leds_resources, .num_resources = ARRAY_SIZE(ioc3_leds_resources), .id = PLATFORM_DEVID_NONE, } }; static int ioc3_led_setup(struct ioc3_priv_data *ipd) { int ret; ret = mfd_add_devices(&ipd->pdev->dev, 0, ioc3_led_cells, ARRAY_SIZE(ioc3_led_cells), &ipd->pdev->resource[0], 0, ipd->domain); if (ret) dev_err(&ipd->pdev->dev, "Failed to add LED subdev\n"); return ret; } static int ip27_baseio_setup(struct ioc3_priv_data *ipd) { int ret, io_irq; io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), PCI_INTERRUPT_INTB); ret = ioc3_irq_domain_setup(ipd, io_irq); if (ret) return ret; ret = ioc3_eth_setup(ipd); if (ret) return ret; ret = ioc3_serial_setup(ipd); if (ret) return ret; return ioc3_m48t35_setup(ipd); } static int ip27_baseio6g_setup(struct ioc3_priv_data *ipd) { int ret, io_irq; io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), PCI_INTERRUPT_INTB); ret = ioc3_irq_domain_setup(ipd, io_irq); if (ret) return ret; ret = ioc3_eth_setup(ipd); if (ret) return ret; ret = ioc3_serial_setup(ipd); if (ret) return ret; ret = ioc3_m48t35_setup(ipd); if (ret) return ret; return ioc3_kbd_setup(ipd); } static int ip27_mio_setup(struct ioc3_priv_data *ipd) { int ret; ret = ioc3_irq_domain_setup(ipd, ipd->pdev->irq); if (ret) return ret; ret = ioc3_serial_setup(ipd); if (ret) return ret; return ioc3_kbd_setup(ipd); } static int ip30_sysboard_setup(struct ioc3_priv_data *ipd) { int ret, io_irq; io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), PCI_INTERRUPT_INTB); ret = ioc3_irq_domain_setup(ipd, io_irq); if (ret) return ret; ret = ioc3_eth_setup(ipd); if (ret) return ret; ret = ioc3_serial_setup(ipd); if (ret) return ret; ret = ioc3_kbd_setup(ipd); if (ret) return ret; ret = ioc3_ds1685_setup(ipd); if (ret) return ret; return ioc3_led_setup(ipd); } static int ioc3_menet_setup(struct ioc3_priv_data *ipd) { int ret, io_irq; io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), PCI_INTERRUPT_INTB); ret = ioc3_irq_domain_setup(ipd, io_irq); if (ret) return ret; ret = ioc3_eth_setup(ipd); if (ret) return ret; return ioc3_serial_setup(ipd); } static int ioc3_menet4_setup(struct ioc3_priv_data *ipd) { return ioc3_eth_setup(ipd); } static int ioc3_cad_duo_setup(struct ioc3_priv_data *ipd) { int ret, io_irq; io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), PCI_INTERRUPT_INTB); ret = ioc3_irq_domain_setup(ipd, io_irq); if (ret) return ret; ret = ioc3_eth_setup(ipd); if (ret) return ret; return ioc3_kbd_setup(ipd); } /* Helper macro for filling ioc3_info array */ #define IOC3_SID(_name, _sid, _setup) \ { \ .name = _name, \ .sid = PCI_VENDOR_ID_SGI | (IOC3_SUBSYS_ ## _sid << 16), \ .setup = _setup, \ } static struct { const char *name; u32 sid; int (*setup)(struct ioc3_priv_data *ipd); } ioc3_infos[] = { IOC3_SID("IP27 BaseIO6G", IP27_BASEIO6G, &ip27_baseio6g_setup), IOC3_SID("IP27 MIO", IP27_MIO, &ip27_mio_setup), IOC3_SID("IP27 BaseIO", IP27_BASEIO, &ip27_baseio_setup), IOC3_SID("IP29 System Board", IP29_SYSBOARD, &ip27_baseio6g_setup), IOC3_SID("IP30 System Board", IP30_SYSBOARD, &ip30_sysboard_setup), IOC3_SID("MENET", MENET, &ioc3_menet_setup), IOC3_SID("MENET4", MENET4, &ioc3_menet4_setup) }; #undef IOC3_SID static int ioc3_setup(struct ioc3_priv_data *ipd) { u32 sid; int i; /* Clear IRQs */ writel(~0, &ipd->regs->sio_iec); writel(~0, &ipd->regs->sio_ir); writel(0, &ipd->regs->eth.eier); writel(~0, &ipd->regs->eth.eisr); /* Read subsystem vendor id and subsystem id */ pci_read_config_dword(ipd->pdev, PCI_SUBSYSTEM_VENDOR_ID, &sid); for (i = 0; i < ARRAY_SIZE(ioc3_infos); i++) if (sid == ioc3_infos[i].sid) { pr_info("ioc3: %s\n", ioc3_infos[i].name); return ioc3_infos[i].setup(ipd); } /* Treat everything not identified by PCI subid as CAD DUO */ pr_info("ioc3: CAD DUO\n"); return ioc3_cad_duo_setup(ipd); } static int ioc3_mfd_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) { struct ioc3_priv_data *ipd; struct ioc3 __iomem *regs; int ret; ret = pci_enable_device(pdev); if (ret) return ret; pci_write_config_byte(pdev, PCI_LATENCY_TIMER, IOC3_LATENCY); pci_set_master(pdev); ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); if (ret) { pr_err("%s: No usable DMA configuration, aborting.\n", pci_name(pdev)); goto out_disable_device; } /* Set up per-IOC3 data */ ipd = devm_kzalloc(&pdev->dev, sizeof(struct ioc3_priv_data), GFP_KERNEL); if (!ipd) { ret = -ENOMEM; goto out_disable_device; } ipd->pdev = pdev; /* * Map all IOC3 registers. These are shared between subdevices * so the main IOC3 module manages them. */ regs = pci_ioremap_bar(pdev, 0); if (!regs) { dev_warn(&pdev->dev, "ioc3: Unable to remap PCI BAR for %s.\n", pci_name(pdev)); ret = -ENOMEM; goto out_disable_device; } ipd->regs = regs; /* Track PCI-device specific data */ pci_set_drvdata(pdev, ipd); ret = ioc3_setup(ipd); if (ret) { /* Remove all already added MFD devices */ mfd_remove_devices(&ipd->pdev->dev); if (ipd->domain) { struct fwnode_handle *fn = ipd->domain->fwnode; irq_domain_remove(ipd->domain); irq_domain_free_fwnode(fn); free_irq(ipd->domain_irq, (void *)ipd); } pci_iounmap(pdev, regs); goto out_disable_device; } return 0; out_disable_device: pci_disable_device(pdev); return ret; } static void ioc3_mfd_remove(struct pci_dev *pdev) { struct ioc3_priv_data *ipd; ipd = pci_get_drvdata(pdev); /* Clear and disable all IRQs */ writel(~0, &ipd->regs->sio_iec); writel(~0, &ipd->regs->sio_ir); /* Release resources */ mfd_remove_devices(&ipd->pdev->dev); if (ipd->domain) { struct fwnode_handle *fn = ipd->domain->fwnode; irq_domain_remove(ipd->domain); irq_domain_free_fwnode(fn); free_irq(ipd->domain_irq, (void *)ipd); } pci_iounmap(pdev, ipd->regs); pci_disable_device(pdev); } static struct pci_device_id ioc3_mfd_id_table[] = { { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID }, { 0, }, }; MODULE_DEVICE_TABLE(pci, ioc3_mfd_id_table); static struct pci_driver ioc3_mfd_driver = { .name = "IOC3", .id_table = ioc3_mfd_id_table, .probe = ioc3_mfd_probe, .remove = ioc3_mfd_remove, }; module_pci_driver(ioc3_mfd_driver); MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>"); MODULE_DESCRIPTION("SGI IOC3 MFD driver"); MODULE_LICENSE("GPL v2");