/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2019, Mellanox Technologies. All rights reserved. */ #ifndef __MLXBF_BOOTCTL_H__ #define __MLXBF_BOOTCTL_H__ /* * Request that the on-chip watchdog be enabled, or disabled, after * the next chip soft reset. This call does not affect the current * status of the on-chip watchdog. If non-zero, the argument * specifies the watchdog interval in seconds. If zero, the watchdog * will not be enabled after the next soft reset. Non-zero errors are * returned as documented below. */ #define MLXBF_BOOTCTL_SET_POST_RESET_WDOG 0x82000000 /* * Query the status which has been requested for the on-chip watchdog * after the next chip soft reset. Returns the interval as set by * MLXBF_BOOTCTL_SET_POST_RESET_WDOG. */ #define MLXBF_BOOTCTL_GET_POST_RESET_WDOG 0x82000001 /* * Request that a specific boot action be taken at the next soft * reset. By default, the boot action is set by external chip pins, * which are sampled on hard reset. Note that the boot action * requested by this call will persist on subsequent resets unless * this service, or the MLNX_SET_SECOND_RESET_ACTION service, is * invoked. See below for the available MLNX_BOOT_xxx parameter * values. Non-zero errors are returned as documented below. */ #define MLXBF_BOOTCTL_SET_RESET_ACTION 0x82000002 /* * Return the specific boot action which will be taken at the next * soft reset. Returns the reset action (see below for the parameter * values for MLXBF_BOOTCTL_SET_RESET_ACTION). */ #define MLXBF_BOOTCTL_GET_RESET_ACTION 0x82000003 /* * Request that a specific boot action be taken at the soft reset * after the next soft reset. For a specified valid boot mode, the * effect of this call is identical to that of invoking * MLXBF_BOOTCTL_SET_RESET_ACTION after the next chip soft reset; in * particular, after that reset, the action for the now next reset can * be queried with MLXBF_BOOTCTL_GET_RESET_ACTION and modified with * MLXBF_BOOTCTL_SET_RESET_ACTION. You may also specify the parameter as * MLNX_BOOT_NONE, which is equivalent to specifying that no call to * MLXBF_BOOTCTL_SET_RESET_ACTION be taken after the next chip soft reset. * This call does not affect the action to be taken at the next soft * reset. Non-zero errors are returned as documented below. */ #define MLXBF_BOOTCTL_SET_SECOND_RESET_ACTION 0x82000004 /* * Return the specific boot action which will be taken at the soft * reset after the next soft reset; this will be one of the valid * actions for MLXBF_BOOTCTL_SET_SECOND_RESET_ACTION. */ #define MLXBF_BOOTCTL_GET_SECOND_RESET_ACTION 0x82000005 /* * Return the fuse status of the current chip. The caller should specify * with the second argument if the state of the lifecycle fuses or the * version of secure boot fuse keys left should be returned. */ #define MLXBF_BOOTCTL_GET_TBB_FUSE_STATUS 0x82000006 /* Reset eMMC by programming the RST_N register. */ #define MLXBF_BOOTCTL_SET_EMMC_RST_N 0x82000007 #define MLXBF_BOOTCTL_GET_DIMM_INFO 0x82000008 /* * Initiate Firmware Reset via TYU. This might be invoked during the reset * flow in isolation mode. */ #define MLXBF_BOOTCTL_FW_RESET 0x8200000D /* * SMC function IDs to set, get and lock the manufacturing information * stored within the eeprom. */ #define MLXBF_BOOTCTL_SET_MFG_INFO 0x8200000E #define MLXBF_BOOTCTL_GET_MFG_INFO 0x8200000F #define MLXBF_BOOTCTL_LOCK_MFG_INFO 0x82000011 /* * SMC function IDs to set and get the large ICM carveout size * stored in the eeprom. */ #define MLNX_HANDLE_SET_ICM_INFO 0x82000012 #define MLNX_HANDLE_GET_ICM_INFO 0x82000013 #define MAX_ICM_BUFFER_SIZE 10 /* * SMC function ID to set the ARM boot state to up */ #define MLNX_HANDLE_OS_UP 0x82000014 /* SMC function IDs for SiP Service queries */ #define MLXBF_BOOTCTL_SIP_SVC_CALL_COUNT 0x8200ff00 #define MLXBF_BOOTCTL_SIP_SVC_UID 0x8200ff01 #define MLXBF_BOOTCTL_SIP_SVC_VERSION 0x8200ff03 /* ARM Standard Service Calls version numbers */ #define MLXBF_BOOTCTL_SVC_VERSION_MAJOR 0x0 #define MLXBF_BOOTCTL_SVC_VERSION_MINOR 0x2 /* Number of svc calls defined. */ #define MLXBF_BOOTCTL_NUM_SVC_CALLS 12 /* Valid reset actions for MLXBF_BOOTCTL_SET_RESET_ACTION. */ #define MLXBF_BOOTCTL_EXTERNAL 0 /* Not boot from eMMC */ #define MLXBF_BOOTCTL_EMMC 1 /* From primary eMMC boot partition */ #define MLNX_BOOTCTL_SWAP_EMMC 2 /* Swap eMMC boot partitions and reboot */ #define MLXBF_BOOTCTL_EMMC_LEGACY 3 /* From primary eMMC in legacy mode */ /* Valid arguments for requesting the fuse status. */ #define MLXBF_BOOTCTL_FUSE_STATUS_LIFECYCLE 0 /* Return lifecycle status. */ #define MLXBF_BOOTCTL_FUSE_STATUS_KEYS 1 /* Return secure boot key status */ /* Additional value to disable the MLXBF_BOOTCTL_SET_SECOND_RESET_ACTION. */ #define MLXBF_BOOTCTL_NONE 0x7fffffff /* Don't change next boot action */ #define MLXBF_LARGE_ICMC_MAX_STRING_SIZE 16 #define MLXBF_LARGE_ICMC_SIZE_MIN 0x80 #define MLXBF_LARGE_ICMC_SIZE_MAX 0x100000 #define MLXBF_LARGE_ICMC_GRANULARITY MLXBF_LARGE_ICMC_SIZE_MIN #endif /* __MLXBF_BOOTCTL_H__ */