# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/media/i2c/ovti,ov5670.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Omnivision OV5670 5 Megapixels raw image sensor maintainers: - Jacopo Mondi <jacopo.mondi@ideasonboard.com> description: |- The OV5670 is a 5 Megapixels raw image sensor which provides images in 10-bits RAW BGGR Bayer format on a 2 data lanes MIPI CSI-2 serial interface and is controlled through an I2C compatible control bus. properties: compatible: const: ovti,ov5670 reg: maxItems: 1 clocks: description: System clock. From 6 to 27 MHz. maxItems: 1 powerdown-gpios: description: Reference to the GPIO connected to the PWDNB pin. Active low. reset-gpios: description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low. maxItems: 1 avdd-supply: description: Analog circuit power. Typically 2.8V. dvdd-supply: description: Digital circuit power. Typically 1.2V. dovdd-supply: description: Digital I/O circuit power. Typically 2.8V or 1.8V. port: $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false properties: endpoint: $ref: /schemas/media/video-interfaces.yaml# additionalProperties: false properties: data-lanes: minItems: 1 maxItems: 2 items: enum: [1, 2] clock-noncontinuous: true remote-endpoint: true required: - compatible - reg - clocks - port additionalProperties: false examples: - | i2c { #address-cells = <1>; #size-cells = <0>; ov5670: sensor@36 { compatible = "ovti,ov5670"; reg = <0x36>; clocks = <&sensor_xclk>; port { ov5670_ep: endpoint { remote-endpoint = <&csi_ep>; data-lanes = <1 2>; clock-noncontinuous; }; }; }; }; ...