// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"
/ {
model = "LincPlus LincStation E1";
compatible = "techvision,tvd8322r", "rockchip,rk3568";
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc1;
rtc0 = &hym8563;
};
chosen {
stdout-path = "serial2:1500000n8";
};
/* This device is only available when reset-button-mux is driven high */
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 5>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
status = "disabled";
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
press-threshold-microvolt = <0>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&gpio_leds &sata1_detect &sata2_detect>;
led-2 {
color = <LED_COLOR_ID_WHITE>;
function = LED_FUNCTION_LAN;
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "netdev";
};
led-3 {
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_LAN;
gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "netdev";
};
led-4 {
color = <LED_COLOR_ID_WHITE>;
function = "m1";
gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
};
led-5 {
color = <LED_COLOR_ID_AMBER>;
function = "m1";
gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_HIGH>;
};
led-6 {
color = <LED_COLOR_ID_WHITE>;
function = "m2";
gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
};
led-7 {
color = <LED_COLOR_ID_AMBER>;
function = "m2";
gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
};
led-8 {
color = <LED_COLOR_ID_WHITE>;
function = "s1";
gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "disk-activity";
};
led-9 {
color = <LED_COLOR_ID_AMBER>;
function = "s1";
gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "gpio";
trigger-sources = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
};
led-a {
color = <LED_COLOR_ID_WHITE>;
function = "s2";
gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "disk-activity";
};
led-b {
color = <LED_COLOR_ID_AMBER>;
function = "s2";
gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "gpio";
trigger-sources = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
};
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
fan: pwm-fan {
compatible = "pwm-fan";
interrupt-parent = <&gpio0>;
interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
#cooling-cells = <2>;
cooling-levels = <0 20 50 90 130 170 210 225 240 255>;
fan-supply = <&vcc12v0_sys>;
fan-stop-to-start-percent = <8>;
pinctrl-names = "default";
pinctrl-0 = <&fan_tach>;
pulses-per-revolution = <2>;
pwms = <&pwm0 0 50000 0>;
};
pwm-leds {
compatible = "pwm-leds";
led-0 {
color = <LED_COLOR_ID_AMBER>;
default-state = "off";
function = LED_FUNCTION_STANDBY;
max-brightness = <255>;
pwms = <&pwm4 0 25000 0>;
};
led-1 {
color = <LED_COLOR_ID_WHITE>;
default-brightness = <127>;
default-state = "on";
function = LED_FUNCTION_POWER;
max-brightness = <255>;
pwms = <&pwm5 0 25000 0>;
};
};
dc_12v: regulator-dc-12v {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc12v0_sys: regulator-vcc12v0-sys {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc12v0_sys_en>;
regulator-name = "vcc12v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
vin-supply = <&dc_12v>;
};
vcc3v3_lan: regulator-vcc3v3-lan {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc3v3_lan_en>;
regulator-name = "vcc3v3_lan";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v0_sys>;
};
vcc3v3_pcie: regulator-vcc3v3-pcie {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc3v3_pcie_en>;
off-on-delay-us = <500000>;
regulator-name = "vcc3v3_pcie";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <5000>;
vin-supply = <&dc_12v>;
};
vcc3v3_sys: regulator-vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_12v>;
};
vcc5v0_sata: regulator-vcc5v0-sata {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_sata_en>;
regulator-name = "vcc5v0_sata";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
vcc5v0_sys: regulator-vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
vcc5v0_usb: regulator-vcc5v0-usb {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
vcc5v0_usb_host: regulator-vcc5v0-usb-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb_host_en>;
regulator-name = "vcc5v0_usb_host";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
};
vcc5v0_usb_otg: regulator-vcc5v0-usb-otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb_otg_en>;
regulator-name = "vcc5v0_usb_otg";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
};
vcc_wl: regulator-vcc-wl {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc_wl_en>;
regulator-name = "vcc_wl";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v0_sys>;
};
vccio_wl: regulator-vccio-wl {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vccio_wl_en>;
regulator-name = "vccio_wl";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc5v0_sys>;
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk809 1>;
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h>;
post-power-on-delay-ms = <200>;
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
};
};
&combphy0 {
status = "okay";
};
&combphy1 {
status = "okay";
};
&combphy2 {
status = "okay";
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
/*
* The fan pulls hot air from the CPU and m.2 slot heat sinks and blows it
* across the hard disks. To keep the disks from overheating (below 50 °C),
* their ambient air, and thus the CPU heat sink, must be kept quite cool.
*/
&cpu_thermal {
trips {
sys_fan1: sys-fan1 {
hysteresis = <2000>;
temperature = <25000>;
type = "active";
};
sys_fan2: sys-fan2 {
hysteresis = <2000>;
temperature = <35000>;
type = "active";
};
sys_fan3: sys-fan3 {
hysteresis = <2000>;
temperature = <45000>;
type = "active";
};
};
cooling-maps {
map1 {
cooling-device = <&fan 1 3>;
trip = <&sys_fan1>;
};
map2 {
cooling-device = <&fan 4 5>;
trip = <&sys_fan2>;
};
map3 {
cooling-device = <&fan 6 THERMAL_NO_LIMIT>;
trip = <&sys_fan3>;
};
};
};
&gpio1 {
/* ata1.01 is the slot labeled HDD2 */
sata1-power-control-hog {
gpio-hog;
gpios = <RK_PD7 GPIO_ACTIVE_LOW>;
line-name = "sata1-power-control";
output-high;
};
};
&gpio2 {
/* ata1.02 is the slot labeled HDD1 */
sata2-power-control-hog {
gpio-hog;
gpios = <RK_PA0 GPIO_ACTIVE_LOW>;
line-name = "sata2-power-control";
output-high;
};
};
&gpio4 {
/* low = SoC reset, high = saradc input */
reset-button-mux-hog {
gpio-hog;
gpios = <RK_PB7 GPIO_ACTIVE_HIGH>;
line-name = "reset-button-mux";
output-low;
};
sata-pm-reset-hog {
gpio-hog;
gpios = <RK_PD2 GPIO_ACTIVE_LOW>;
line-name = "sata-pm-reset";
output-low;
};
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
avdd-0v9-supply = <&vdda0v9_image>;
avdd-1v8-supply = <&vcca1v8_image>;
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
vdd_cpu: regulator@40 {
compatible = "silergy,syr827";
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
regulator-ramp-delay = <1000>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
rk809: pmic@20 {
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
system-power-controller;
vcc1-supply = <&vcc3v3_sys>;
vcc2-supply = <&vcc3v3_sys>;
vcc3-supply = <&vcc3v3_sys>;
vcc4-supply = <&vcc3v3_sys>;
vcc5-supply = <&vcc3v3_sys>;
vcc6-supply = <&vcc5v0_sys>;
vcc7-supply = <&vcc3v3_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc3v3_sys>;
wakeup-source;
regulators {
vdd_logic: DCDC_REG1 {
regulator-name = "vdd_logic";
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8: DCDC_REG5 {
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdda0v9_image: LDO_REG1 {
regulator-name = "vdda0v9_image";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda_0v9: LDO_REG2 {
regulator-name = "vdda_0v9";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-name = "vdda0v9_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vccio_acodec: LDO_REG4 {
regulator-name = "vccio_acodec";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-name = "vccio_sd";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-name = "vcc3v3_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcca_1v8: LDO_REG7 {
regulator-name = "vcca_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_pmu: LDO_REG8 {
regulator-name = "vcca1v8_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcca1v8_image: LDO_REG9 {
regulator-name = "vcca1v8_image";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3: SWITCH_REG1 {
regulator-name = "vcc_3v3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_sd: SWITCH_REG2 {
regulator-name = "vcc3v3_sd";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&i2c1 {
status = "okay";
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <0>;
clock-output-names = "rtcic_32kout";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
wakeup-source;
};
};
&i2s0_8ch {
status = "okay";
};
&pcie2x1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie2x1_rst>;
reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_lan>;
status = "okay";
};
&pcie30phy {
data-lanes = <1 2>;
status = "okay";
};
&pcie3x1 {
reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
&pcie3x2 {
num-lanes = <1>;
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
&pinctrl {
bluetooth {
bt_device_wake_h: bt-device-wake-h {
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_enable_h: bt-enable-h {
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_host_wake_h: bt-host-wake-h {
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
gpio-leds {
gpio_leds: gpio-leds {
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
pcie {
pcie2x1_rst: pcie2x1-rst {
rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc3v3_lan_en: vcc3v3-lan-en {
rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc3v3_pcie_en: vcc3v3-pcie-en {
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int: pmic-int {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
pwm-fan {
fan_tach: fan-tach {
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc12v0_sys_en: vcc12v0-sys-en {
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sata {
sata1_detect: sata1-detect {
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
};
sata2_detect: sata2-detect {
rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
};
vcc5v0_sata_en: vcc5v0-sata-en {
rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
vcc5v0_usb_host_en: vcc5v0-usb-host-en {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
wlan {
vcc_wl_en: vcc-wl-en {
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
vccio_wl_en: vccio-wl-en {
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
wifi_enable_h: wifi-enable-h {
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
wifi_host_wake_h: wifi-host-wake-h {
rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
&pmu_io_domains {
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcc3v3_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio2-supply = <&vcc_1v8>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcc_1v8>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc_1v8>;
vccio7-supply = <&vcc_3v3>;
status = "okay";
};
&pwm0 {
status = "okay";
};
&pwm4 {
status = "okay";
};
&pwm5 {
status = "okay";
};
&saradc {
vref-supply = <&vcca_1v8>;
status = "disabled";
};
&sata1 {
target-supply = <&vcc5v0_sata>;
status = "okay";
};
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
status = "okay";
};
&sdmmc1 {
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
disable-wp;
keep-power-in-suspend;
max-frequency = <208000000>;
mmc-pwrseq = <&sdio_pwrseq>;
no-mmc;
no-sd;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
sd-uhs-sdr104;
vmmc-supply = <&vcc_wl>;
vqmmc-supply = <&vccio_wl>;
status = "okay";
rtl8822cs: wifi@1 {
reg = <1>;
interrupt-parent = <&gpio2>;
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_h>;
};
};
&tsadc {
rockchip,hw-tshut-mode = <0>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
&uart1 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "realtek,rtl8822cs-bt";
device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_device_wake_h &bt_enable_h &bt_host_wake_h>;
};
};
&uart2 {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host0_xhci {
dr_mode = "host";
extcon = <&usb2phy0>;
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usb2phy0 {
status = "okay";
};
&usb2phy0_otg {
phy-supply = <&vcc5v0_usb_otg>;
status = "okay";
};
&usb2phy1 {
status = "okay";
};
&usb2phy1_host {
phy-supply = <&vcc5v0_usb_host>;
status = "okay";
};
&usb2phy1_otg {
phy-supply = <&vcc5v0_usb_host>;
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};