# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/regulator/rohm,pmic-states.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ROHM PMICs' hardware state machine descriptions
maintainers:
- Matti Vaittinen <mazziesaccount@gmail.com>
description:
Many of the ROHM PMICs have internal state-machine designed to provide
correct voltages for different SOC states. In many cases the states and
transitions are SOC specific, but ones described here can be found from a
few of the different ROHM PMICs.
properties:
rohm,dvs-run-voltage:
description:
PMIC "RUN" state voltage in uV when PMIC HW states are used. 0 means the
regulator should be disabled at RUN state. Some regulators do not support
setting HW state specific voltage but do support enable/disable control.
For them any positive value means the regulator should be enabled without
touching the voltage.
$ref: /schemas/types.yaml#/definitions/uint32
rohm,dvs-suspend-voltage:
description:
PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. 0 means
the regulator should be disabled at SUSPEND state. Some regulators do not
support setting HW state specific voltage but do support enable/disable
control. For them any positive value means the regulator should be
enabled without touching the voltage.
$ref: /schemas/types.yaml#/definitions/uint32
rohm,dvs-idle-voltage:
description:
PMIC "IDLE" state voltage in uV. 0 means the regulator should be disabled
at IDLE state. Some regulators do not support setting HW state specific
voltage but do support enable/disable control. For them any positive
value means the regulator should be enabled without touching the voltage.
$ref: /schemas/types.yaml#/definitions/uint32
rohm,dvs-lpsr-voltage:
description:
PMIC "LPSR" state voltage in uV when PMIC HW states are used. 0 means the
regulator should be disabled at LPSR state. Some regulators do not
support setting HW state specific voltage but do support enable/disable
control. For them any positive value means the regulator should be
enabled without touching the voltage. Some PMICs' documentation may refer
to this state as a "deep-idle state".
$ref: /schemas/types.yaml#/definitions/uint32
# The schema is expected to be reference by PMIC schemas, which may introduce
# other properties that must be allowed.
additionalProperties: true